 |
 |
Free Media Mail shipping or UPS Ground for only $5.95
on all domestic orders over $99
|
 |
|
Music Hall Turntables
MMF-7.1 Turntable(Without Cartridge)
Turntables
$1,295.99
Turntable
|
The music hall mmf-7.1 turntable is a 2-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor, switch, and wiring are isolated on their own platform and completely decoupled from the turntable. Sorbothane hemispheres separate the two platforms and provide additional vibration damping. The mmf-7.1 comes in a high-gloss piano black lacquer finish and is available with or without cartridge.
Features:
* Music Hall’s unique dual-plinth construction
* Carbon fiber tonearm with flexible internal wire drawn from high purity copper
* Counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
* Completely isolated/decoupled AC motor with two-speed (33/45rpm) pulley set in the front left corner of the turntable thus eliminating all vibration from the belt to the cartridge
* Optional Goldring 2400 moving magnet cartridge with Vital stylus. The cartridge supplied is properly aligned and mounted
* Precision stainless steel main bearing sheathed in Teflon for noise-free fluid operation
* Non-resonant acrylic platter with metal screw-on record clamp and soft felt mat
* High quality gold RCA connectors with detachable phono cable
|
|
MMF-7.1 Turntable
Turntables
$1,495.99
Turntable
|
|
The music hall mmf-7.1 turntable is a 2-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor, switch, and wiring are isolated on their own platform and completely decoupled from the turntable. Sorbothane hemispheres separate the two platforms and provide additional vibration damping. The mmf-7.1 comes in a high-gloss piano black lacquer finish and is available with or without cartridge.
Features:
* Music Hall’s unique dual-plinth construction
* Carbon fiber tonearm with flexible internal wire drawn from high purity copper
* Counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
* Completely isolated/decoupled AC motor with two-speed (33/45rpm) pulley set in the front left corner of the turntable thus eliminating all vibration from the belt to the cartridge
* Optional Goldring 2400 moving magnet cartridge with Vital stylus. The cartridge supplied is properly aligned and mounted
* Precision stainless steel main bearing sheathed in Teflon for noise-free fluid operation
* Non-resonant acrylic platter with metal screw-on record clamp and soft felt mat
* High quality gold RCA connectors with detachable phono cable
|
|
MMF-5.1SE Turntable
Turntables
$1,095.99
Turntable
|
The music hall mmf-5.1 Special Edition is a significant upgrade over the standard mmf-5.1. The Special Edition includes upgrades to the following critical components; vibration damping system, cartridge, and plinth. The mmf-5.1SE like the mmf-5.1 is a 2-speed belt driven audiophile turntable employing music hall’s unique dual-plinth construction. The distinctive design isolates the key sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Sorbothane orbs separate the two platforms and provide vibration damping. The mmf-5.1SE comes complete with cartridge mounted.
Features:
* Music Hall’s unique dual-plinth construction
* Sorbothane isolation orbs
* Rosenut real wood veneer top plinth renders a classic look to a sophisticated design
* Top tier one piece alloy tonearm with flexible internal wire drawn from high purity copper
* Counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
* Separately isolated asynchronous motor with two-speed (33/45rpm) pulley
* Goldring 2400 moving magnet phono cartridge with
replaceable Vital diamond stylus. The cartridge supplied is properly aligned and mounted
* Precision stainless steel main bearing sheathed in Teflon for noise-free fluid operation
* Dynamically balanced alloy platter with soft felt mat and screw-on record clamp
* High quality gold RCA connectors with detachable phono cable
* Special vibration damping adjustable foot and round spirit level
* Low noise fully manual belt-drive design
* Excellent instruction manual and easy assembly
* Dust cover and 45rpm adaptor
|
|
MMF-5.1 Turntable
Turntables
$875.99
Turntable
|
The music hall mmf-5.1 turntable is a 2-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Viso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.1 comes complete with cartridge mounted.
Features:
* Music Hall’s unique dual-plinth construction
* Gorgeous high-gloss Piano Black Lacquer finish
* Top tier one piece alloy tonearm with flexible internal wire drawn from high purity copper
* Counterweight’s center of gravity is level with the
stylus tip is decoupled from the arm and acts as a resonance damper
* Separately isolated asynchronous motor with two-speed (33/45rpm) pulley
* Goldring 2200 moving magnet phono cartridge with replaceable Elliptical diamond stylus. The cartridge supplied is properly aligned and mounted
* Precision stainless steel main bearing sheathed in Teflon for noise-free fluid operation
* Dynamically balanced alloy platter with soft felt mat and screw-on record clamp
* High quality gold RCA connectors and detachable phono cable
* Special vibration damping adjustable foot and round spirit level
* Low noise fully manual belt-drive design
* Excellent instruction manual and easy assembly
* Dust cover and 45rpm adaptor
|
|
MMF-2.2LE Turntable
Turntables
$499.99
Turntable
|
The music hall mmf-2.2 Limited Edition turntable is a 2-speed belt driven audiophile turntable with special Ferrari Red plinth at a budget price. It is constructed using high quality components and it comes complete with an arm and cartridge. The construction of the mmf-2.2LE has been simplified to focus on the critical components; the bearing, the motor, and the arm. It comes complete with cartridge mounted.
Features
* Gorgeous Ferrari Red finish
* Special vibration damping foot
* One piece alloy tonearm for superb tracking ability
* Low noise fully manual belt-drive design
* Separately isolated asynchronous motor with two-speed
(33/45rpm) pulley
* Music Hall Tracker moving-magnet phono cartridge with
replaceable elliptical stylus
* The cartridge supplied is properly aligned and mounted
* High precision stainless steel and bronze bearing
assembly for quiet fluid operation
* Alloy platter and felt mat
* Excellent instruction manual
* Quick and easy to assemble
* High quality gold RCA connectors
* Dust cover and 45rpm adaptor
|
|
mmf-9.1 turntable (Without Cartridge)
Turntables
$1,995.99
Turntables
|
The music hall mmf-9.1 turntable, our flagship model, is a 2-speed belt driven audiophile turntable employing the unique triple-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tone arm, and cartridge on the top platform from the adjustable tip-toe feet, electronic speed control, and wiring which are mounted on the bottom platform. The motor is isolated on its own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three plinths and provide additional vibration damping. The mmf-9.1 comes in a high-gloss piano black lacquer finish and is available with or without cartridge.
Features:
* Music Hall’s unique triple-plinth construction
* One piece carbon fiber tone arm with flexible internal
wire drawn from high purity copper
* Counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a
resonance damper
* Completely isolated/decoupled electronic speed controlled (33/45rpm) 50Hz motor. The motor sits in the front left
corner of the turntable thus eliminating all vibration from the belt to the cartridge
* Optional Goldring Eroica LX low-output moving-coil
cartridge with Gyger II line contact stylus. The cartridge supplied is properly aligned and mounted
* Inverted ceramic main bearing for super quiet fluid
operation
* Non-resonant 1” thick acrylic platter
* High quality gold RCA connectors with detachable phono
cable
* Adjustable tip-toe feet with anti-scratch cups
* Low noise fully manual belt-drive design Dimensions
* Dust cover, 45rpm adaptor, and spirit level W18.25 x
D13.25 x H7.25 in.
* Excellent instruction manual and easy assembly
|
|
MMF-2.2 Turntable
Turntables
$449.99
Turntable
|
The music hall mmf-2.2 turntable is a 2-speed belt driven audiophile turntable at a budget price. It is constructed using high quality components and it comes complete with an arm and cartridge. The construction of the mmf-2.2 has been simplified to focus on the critical components; the bearing, the motor, and the arm. It comes complete with cartridge mounted.
Features
* Gorgeous high-gloss piano black lacquer finish
* Special vibration damping foot
* One piece alloy tonearm for superb tracking ability
* Low noise fully manual belt-drive design
* Separately isolated asynchronous motor with two-speed (33/45rpm) pulley
* Music Hall Tracker moving-magnet phono cartridge with replaceable elliptical stylus
* The cartridge supplied is properly aligned and mounted
* High precision stainless steel and bronze bearing
assembly for quiet fluid operation
|
|
mmf-9.1 turntable
Turntables
$2,195.99
Turntable
|
|
The music hall mmf-9.1 turntable, our flagship model, is a 2-speed belt driven audiophile turntable employing the unique triple-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tone arm, and cartridge on the top platform from the adjustable tip-toe feet, electronic speed control, and wiring which are mounted on the bottom platform. The motor is isolated on its own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three plinths and provide additional vibration damping. The mmf-9.1 comes in a high-gloss piano black lacquer finish and is available with or without cartridge.
Features:
* Music Hall’s unique triple-plinth construction
* One piece carbon fiber tone arm with flexible internal
wire drawn from high purity copper
* Counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a
resonance damper
* Completely isolated/decoupled electronic speed controlled (33/45rpm) 50Hz motor. The motor sits in the front left
corner of the turntable thus eliminating all vibration from the belt to the cartridge
* Optional Goldring Eroica LX low-output moving-coil
cartridge with Gyger II line contact stylus. The cartridge supplied is properly aligned and mounted
* Inverted ceramic main bearing for super quiet fluid
operation
* Non-resonant 1” thick acrylic platter
* High quality gold RCA connectors with detachable phono
cable
* Adjustable tip-toe feet with anti-scratch cups
* Low noise fully manual belt-drive design Dimensions
* Dust cover, 45rpm adaptor, and spirit level W18.25 x
D13.25 x H7.25 in.
* Excellent instruction manual and easy assembly
|
|
Audio-Technica AT-LP2D-USB
Turntables
$199.95
|
Audio-Technica makes it easier than ever to transfer your albums to the digital realm with this new AT-LP2D-USB recording system. The AT-LP2D-USB stereo turntable somes equipped with a USB output that allows direct connection to your computer. The system also offers: state-of-the-art recording software- Cakewalk PYRO and Audactiy: an integral dual-magnet Audio-Technica phono cartridge; and a USB cable and adapter cables. The turntable also features a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phone or a line-level input.
Full Specifications: Audio-Technica AT-LP2D-USB
Turntable Features Drive Type Belt drive
Speeds 33.3rpm, 45rpm
Turntable Operation Full Automatic
Cartridge Type Dual Magnet
Features Hinged Detachable Dust Cover, Built-in Usb Audio Adapter
Signal To Noise Ratio 50 dB
Wow & Flutter 0.25 % WRMS
General Product Info Weight 7.5 lbs
Manufacturer Part No. AT-LP2D-USB
UPC 042005150076
Dimension 3.8 in x 14.2 in x 14.1 in (HxWxD)
|
|
Numark PT-01 Portable Turntable
Turntables
$129.99
Portable Turntable
|
-Portable turntable with protective dustcover and integrated carrying handle
-Fits inside a standard 12 record case
-Battery powered by 6 D cells (not included) or AC wall adapter (included)
-Built-in speaker
-33, 45, and 78 RPM settings w/ +/- 10% pitch control, ton and volume controls
-Plays all standard sized records up to 12
-Line outputs and 1/4 and 1/8 headphone outputs
-Removable stylus
-45 RPM adapter included
|
|
Zerodust Stylus Tip Cleaner
Accessories
$69.99
|
The Zerodust is Our Best-Selling, Non-Fluid Based Stylus Cleaner! No More Hard Bristled Brushes!
This fresh approach to stylus cleaning has saved all of us from the fear of hard bristled brushes and over applying dangerous fluids. Clean your stylus simply and effectively with the Zerodust from Japan. This space-age polymer bubble allows you to simply lower your stylus onto its surface, then quickly lift the arm lever and you’re done! Watch as the stylus tip slowly sinks into the baby soft surface, leaving behind an impression with the stylus debris left behind! This unique device will last a lifetime, can be cleaned with tap water, and can extend the life of your cartridge! Comes complete with a magnifier to inspect your stylus! Our highest recommendation!
“After a few seconds, you lift the stylus, and it’s as clean and reside-free as the proverbial whistle…Upside: no potentially dangerous brushing, and no fluids!”
- Michael Fremer, Stereophile, Recommended Components Issue
|
|
Tube Phono Stage By Bellari VP 129
Accessories
$250.99
|
Music hall is proud to announce the exclusive audio distribution for the Bellari vp129 phono preamp. The vp129 is a tube phono preamp with a built in headphone amplifier, for use with moving-magnet and high output moving-coil cartridges. The vp129 is designed to amplify an RIAA equalized phono signal to a hi-level signal. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.
The Bellari seemed to create a sound that was rich natural and appealing. Surface noise was low, and the music emerged from a crisp quiet background. It was an excellent sound by almost any standards; one I was very happy to listen to. The bane of cheap vinyl reproduction is excessive brightness/harshness. The Bellari sounded focussed and articulate, but rich and warm too - with an attractively full bass and sweet open mid-band. -- Jimmy Hughes, Hi-Fi + Issue 37
Features:
• RIAA Equalization
• All tube circuitry
• Switchable Rumble Filter
• Mute Switch
• Headphone Output w/variable level control
• Steel Chassis
Specifications:
• Input Sensitivity: 30 dB gain
• Input Impedance: 50k Ohms
• Output Impedance: 8 OhmsHeadphone, 100 Ohms RCA
• Max Output Level: >10dB @ 1kHz at .1% dist.
• Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
• Rumble Filter: 20Hz
• THD .02% @ 1KHz
• S/N Ratio: >80 dB unweighted
• PWR: 12 - 18 VDC
• Size: W6 x H2.5 x D5.4 in.
• Weight: 1 lb.
• Indicator: 1 Power LED
|
|
OBH-18 MM Phono Pre-amp
Accessories
$250.99
|
With modern amplifiers expected to cater for so many new devices, the phono capability has frequently been one of the features to disappear. At Creek Audio, the engineering team has always been aware of the benefits of vinyl – that is why the company continues to provide a number of phono stage options.
The OBH-18 was released in late 2003. The function of the OBH-18 is to boost the level and correct the frequency response of a low level signal coming from a moving magnet phono pick-up on a conventional turntable. The signal required by most modern amplifiers is described as being 'LINE' level, which is, in technical terms, between 200 and 500 milli-Volts with a flat frequency response. Unless your amplifier has a specific 'Phono' or Disc input, the level will be too low and the frequency response will be wrong. The OBH-18 is designed to boost the signal and introduce an R.I.A.A. frequency response characteristic.
The OBH-18 looks the part too! Designed to complement the Creek range of amplifiers, tuners and CD players, the new OBH range features an impressive solid aluminium front panel in a silver finish. The remainder of the 150mm casing is black so the products all but disappear.
|
|
OBH-15 MM Phono Pre-amp
Accessories
$450.99
|
With modern amplifiers expected to cater for so many new devices, the Phono capability has frequently been one of the features to disappear. Creek Audio has always been aware of the benefits of vinyl – that is why the company continues to provide a number of Phono stage options.
The most recent addition to the Creek range is the OBH-15, combining moving magnet and moving coil Phono pre-amplifiers, into one diminutive chassis. Seriously impressive and offering audiophile performance, the new OBH-15 will augment any system.
The OBH-15 Phono pre-amp can now drive longer cables, due to its low output impedance. It has combined the high quality discrete semiconductor circuitry of the OBH-8 and OBH-9 input and gain stages, and added improved open loop gain by cascoding them, prior to the selector switch and combined passive RIAA circuit. Separate Burr-Brown professional grade low-noise op-amps are used for each channel, to buffer the output signal and provide a very low impedance drive to any pre-amp or integrated amplifier. The OBH-15 can switch from moving magnet to moving coil cartridges, via a simple push button on the rear panel. As it has two input circuits, optimised for each type of cartridge it allows for the connection of two turntables. A high gain MC version, for low output MC cartridges, is available to order.
The OBH-15 has a built-in high performance power supply regulator circuit which makes it immune from power supply fluctuations so, it can be used with the un-regulated OBH-1, 6 Watt power supply; but it will sound better with the regulated 12 Watt OBH-2, which is available as an option.
Internally, the OBH-15 has built to the highest standards using a glass-fibre double sided, plated through hole PCB and very high-grade components. The OBH-15 looks the part too! Designed to complement the Creek range of amplifiers, tuners and CD players, the new OBH range features an impressive 4mm thick solid aluminium front panel in a silver finish. The remainder of the 150mm deep extruded aluminium case is painted black, so the product all but disappears.
|
|
A25.2 Integrated Amplifier
Accessories
$699.99
|
We set out to prove that with attention to detail, good design, and careful hand assembly that a superior amplifier could be made at a reasonable price. The music hall a25.2 integrated amplifier is the realization of those objectives. It outperforms many integrated amplifiers in its price class and quite a few above. The a25.2 is the heart around which any system can be built and it is the perfect complement to our cd25.2 cd player and t25.2 tuner. These three components combined offer a remarkable “live music” experience that was previously unobtainable at this price.
Features:
* Digitally-controlled analogue volume control by Texas Instruments, PGA 2311
* 50 watt/channel amplifier
* High-quality toroidal power transformer
* Specially designed low-noise pre-amp section
* Pre-amp/Subwoofer output
* 4 analog inputs, 1 tape loop, 1 headphone input
* Heavy rigid chassis
* Thick brushed aluminum fascia
* Gorgeous slim-line remote control
* Easily readable and dimmable florescent display
* Detachable power cord
* Available in silver or black
|
|
Trio CD/Receiver
Accessories
$1,199.99
 |
We designed the trio to enhance the modern life of the space conscious music lover by providing them with three gorgeous sounding components in one simple uncluttered package. The one box trio contains; a two-channel integrated amplifier, an am/fm tuner, and cd player. We chose a select group of technologically advanced components to create this powerful one box wonder.
These three components combined offer a remarkable “live music” experience that was previously unobtainable at this price.
Features:
* 50 watt/channel integrated amplifier
* AM/FM remote controllable tuner with 80 assignable presets
* Sophisticated cd player
* Thick brushed-aluminum fascia and solid chassis
* Headphone output
* Gold-plated inputs include: 4 audio + 1 linked S-video or single rca video
* Gold-plated outputs include: pre-amp, sub, tape, and 1 linked S-video or single rca video
* A, B, A + B speaker switching
* 110v/220v switchable transformer
* Gorgeous slim-line remote control
|
|
Zerostat 3
Accessories
$100.99
 |
Effective at neutralizing static charges on virtually any surface without the need or sprays.
The Zerostat 3 is highly rated for its ability to improve the sound quality of records and CDs by removing static.
The Zerostat 3 incorporates a unique Piezo Crystal device which generates a positive electrical charge of Ions with on gentle squeeze of the trigger, and a negative charge on the material. Constructed from a durable hard plastic, it requires no batteries or refills and is a long lasting alternative to cleaning brushes.
|
|
Hunt EDA Brush
Accessories
$30.99
 |
Hunt EDA carbon fiber record cleaning brush
|
|
Bellari VP29 Solid State Phono Stage
Accessories
$76.99
 |
The vp29 is a solid state phono preamp for use with moving-magnet and high output moving-coil cartridges. The vp29 is designed to amplify an RIAA equalized phono signal to a hi-level signal. It’s cheap cheerful and manufactured in the US.
Features:
• RIAA Equalization
• Steel Chassis
Specifications:
• I/O Connectors: RCA, ¼” TRS Stereo
• Input Sensitivity: 35 dB gain
• Input Capacitance: 5pf + cable capacitance
• Input Impedance: 50k Ohms
• Output Impedance: 1 Ohms
• Max Output Level: >10dB @ 1kHz at .1% dist.
• Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
• THD .02% @ 1KHz
• S/N Ratio: >80 dB unweighted
• PWR: 12 - 18 VDC
• Size: W3.25 x H1.5 x D2 in.
• Weight: 1 lb.
• Indicator: 1 Power LED
|
|
Pixall MK II
Accessories
$39.99
 |
The Record Cleaner That Really Works!
The Internationally Acclaimed Picall Mk II Older has proved to be the most effective dry cleaning system yet devised for removing not just surface dust but, more importantly, damaging microdust particles embedded deep within the record grooves.
The specially formulated cleaning tape is rolled over the surface of the record to pick up debris and dust, powerfully and quickly. When the roller itself becomes dirty and loses its effectiveness one simply peeks back the tape to expose a fresh layer.
Easy fit refills are available which hold a further 1.85 metres of special record cleaning tape.
|
|
Bellari VP530 USB/Tube Phono Stage
Accessories
$399.99
 |
The vp530 is a usb/tube phono preamp for use with moving-magnet and high output moving-coil cartridges. It includes a built in headphone amplifier, Burr-Brown A2D converter w/usb output, and RIAA curve/flat EQ. The vp530 is designed to amplify an RIAA equalized phono signal to a hi-level signal or provide a usb digital output. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.
Features:
* RIAA/Flat Equalization
* All tube circuitry
* Switchable Rumble Filter
* Mute Switch
* Headphone Output w/variable level control
* Steel Chassis
Specifications:
* I/ O Connectors: RCA,1/4 TRS Stereo, mini USB
* Input Sensitivity: 30 dB gain @ 1kHz, 47k ohms
* Input Impedance: 50k ohms
* Output Impedance: 8 ohms Headphone, 100 ohms RCA
* Max Output Level: >10dB @ 1kHz at at .1% dist.
* Equalization: RIAA +/- 1.5 dB, 20Hz to 20kHz
* Burr-Brown PCM2901EG, 16 bit 44.1khz
* Rumble Filter: 20Hz
* THD: .02% @ 1KHz
* S/N Ratio: >80 dB unweighted
* PWR: PSU115 15 V DC 700Ma
* Size: 6w x 2.5h x 5.4d
* Weight: 2 lb
* Indicator: 1 Power LED
|
|
MMF-2.2LE Turntable (white)
Turntables
$499.99
Turntable
|
Music Hall builds one of the best-value entry-level tables around, and now it comes in gorgeous high-gloss White finish. Featuring a heavily upgraded alloy tonearm, height-adjustable vibration-dampening feet for setting level, upgraded tonearm wiring and a new contoured dustcover.
This table comes with a pre-mounted Music Hall Tracker moving magnet cartridge. The MMF-2.2 LE is the perfect introduction to the wonderful world of analog and in many ways no CD player can compete with the sound from this turntable!
Specifications:
Power supply: 110V/60Hz
Power absorption: 2 VA
Speeds: 33 1/3 rpm, manual commutation to 45 rpm
Deviation from nominal speed: +/- 0.9%
Wow and flutter: +/- 0.15%
Rumble max: -70 dB
Tracking force: 10-30 mN
Effective length of tonearm: 9 inches
Overhang: 0.67 inches
Platter diameter: 11.81 inches
Platter weight: 4.5 lbs.
Dimensions (WDH): 16.5 x12.5 x 4.5 inches
Weight of the unit (incl. packing material): 17 lbs
|
|
MMF- USB 1
Turntables
$249.99
Turntable
 |
Music Hall's new USB-1 is a convenient, easy to use, and fun turntable. It’s a snap to set-up and comes with everything you need to start spinning vinyl. Whether you’re looking to digitize and download your record collection, release your inner DJ, or simply discover the joy of spinning vinyl, the USB-1 is your answer. It has a built-in phono preamp, cartridge, dust cover, and includes all necessary cables and software required for simple plug and play operation.
Features
Extremely quiet belt drive
2-speed turntable
Aluminum die-cast platter
33 1/3, 45 rpm playback speeds
High gloss black finish
Encode mp3’s and transfer them to your iPod using iTunes
USB output for converting vinyl to PC or MAC
USB cable supplied
Free Audacity software included
Analog output via built-in Phono Amp or direct line out
Static balanced S-shaped tonearm w/detachable headshell
Audio Technica AT3600L moving-magnet cartridge supplied
Anti-skating control for increased stereo balance
+/- 10% adjustable pitch control
Dust cover included
Designed and developed in the US and France
Dimensions: w17.7 x d13.8 x h5.7 in. --- Weight: 10 lbs.
|
|
|
 Give the perfect gift SoundStageDirect.com Gift Certificates!
|
Customer Service
Contact Customer Service
New Arrivals
New Arrival Records
Genres
Blues Vinyl Records
Classical Vinyl Records
Hip Hop Vinyl Records
Jazz Vinyl Records
Latin Vinyl Records
Rap Vinyl Records
Reggae Vinyl Records
Rock Vinyl Records
> Alt Rock & Grunge
> Classic Rock Records
> Heavy Metal Records
> Punk Records
Soul, R&B, Funk Records
Soundtracks Vinyl Records
Formats
Mobile Fidelity Vinyl Records
Music On Vinyl Records
180 Gram Vinyl Records
180 Gram Jazz Vinyl Records
200 Gram Vinyl Records
Blue Note Vinyl Reissue
Colored Vinyl Records
Pre-Orders
Pre-Order Records
LP Outlets
Big Savings on LPs
Record Cleaners
Accessories
Audio Intelligent Vinyl Solutions
Discwasher D4
Mobile Fidelity-MoFi Nitty Gritty & Accessories
Spin Clean Record Washer
T-Shirts
Got Vinyl T-Shirts
Turntables
Audio Elegance Accessories
Music Hall Turntables
Turntables
Turntable Accessories
Fuses
HIFI-Tuning
Wish List
View Your Wish List
Order Tracking
Track Orders
Articles and News of Interest
Contact Us
SoundStage Direct, LLC
212 Decatur St
Doylestown, PA 18901
1-877-WAX-TRAX
(929-8729)
International
267-247-5051
Monday-Friday
9 am to 6 pm EST
Saturday
9 am to 3 pm EST
Customer Service is also available by Email or the Web.
|
|
|
|
