AudioQuest

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Low-Z Power | Noise-Dissipation System

Redefining the Science of Power Conditioning

Niagara 1000 brings the benefits of highly optimized power management to far more music lovers.

Designed by Garth Powell, the Niagara 1000 embodies the very same design philosophy and incorporates the same patented technology found in its larger sibling, the Niagara 7000, but packs it into a smaller, sleeker enclosure—at a fraction of the price. Much like the Niagara 7000, the Niagara 1000 uses ultra-low resistance solid-core wiring optimized for low-noise directionality, capacitor forming technologies that vastly improve linearity and minimize distortion, and low impedance AC inlet and outlet contacts with heavy silver plating over high-purity Beryllium Copper for superior noise dissipation.

Similarly, Niagara 1000 features our non-sacrificial surge protection, Zero Ground-Contamination Technology, and over-voltage shutdown, ensuring that your customers’ A/V systems are thoroughly protected from AC surges and spikes. While the Niagara 1000 lacks the 7000’s sophisticated Transient Power Correction and Dielectric-Biased AC Isolation Transformers, it does employ our patented Ground-Noise Dissipation System and Ultra-Linear Noise-Dissipation Technology. And, whereas the Niagara 7000 has 12 AC outlets, the Niagara 1000 fits six high-performance outlets into its sleek chassis. In addition, input current maximum capacity—20 amps RMS in the Niagara 7000—is 15 amps RMS in the 1000.

Of course, the biggest differences between the 7000 and 1000 are also the most obvious: size, shape, and weight. The Niagara 7000 can be rack-mounted and measures 15.5” W x 5.24” H x 17.2” D and weighs an impressive 81lbs. The Niagara1000, however, is designed to be placed on a floor or atop a rack, beside or behind a hi-fi system, measures 4.75” W x 4.0” H x 20.0” D, and weighs a much more manageable 5.5lbs. Perhaps most important, at $995 US, Niagara 1000 brings the benefits of highly optimized power management to far more music lovers.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Optimizes smartphones, tablets, computers, TVs, gaming consoles, media streamers, and more.

A modern DAC for the modern world

Beetle is a multi-purpose DAC for today’s many different lifestyles. Capable of delivering naturally dynamic, uncompressed music via its high-performance optical or asynchronous USB inputs, Beetle adds exceptional convenience and surprisingly beautiful sound through its asynchronous Bluetooth technology.

Some will see Beetle as the perfect complement to a TV’s optical audio output—often the only audio output provided on a modern HDTV—while others will want to use it as a major sonic upgrade for their favorite media players or gaming consoles.

Still others will take full advantage of Beetle’s asynchronous USB input to enjoy clean, clear, naturally beautiful sound from any laptop or computer.

But why choose one or the other? With Beetle’s asynchronous Bluetooth technology, you can wirelessly stream music from your mobile device, while surfing the web, checking Facebook updates, or sending email.

Now there are more great ways to enjoy the superior sound of an AudioQuest DAC!

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Back in 1973, I became a dedicated user of the Decca Carbon Fiber Record Brush. The British Decca Brush was so wonderfully more effective than any of the wet-cloth-pad cleaners that smeared dirt around on one’s records.

As often happens to truly superior products, the Decca Brush was mostly ignored — the overall record-cleaning market was dominated by cleaning pads attached to wood handles — not because they worked well, but because many hi-fi stores preferred to sell a cleaner that forced customers to come back to buy “special” fluid, again and again.

After creating AudioQuest in 1980, and with the wild success of the AQ 404 phono cartridge in 1982, and because I personally used a Carbon Fiber record brush every single day — AudioQuest began making the AQ Carbon Fiber Record Brush — now a 35-year old success story, and maybe the world’s favorite way to respect and care for LPs.

Except — we eventually learned that the AQ Record Brush (and every other brand of carbon Fiber brush), doesn’t have a good electrical path between the fibers and the handle, and that the print-protecting coating on the metal handle prevents a proper electrical connection to the user’s hand. The user is the “ground” for static electricity, so having a good electrical contact from fibers-to-hand is a big deal!

In creating AQ’s new Conductive Carbon Fiber Brush, AudioQuest created new tooling for every part of our new design. AQ’s reborn Brush has ideal conductivity from the Carbon Fibers, through the internal parts of the brush, to the conductive Gold Contacts placed right where your fingers need them.

We also reinvestigated what is possible with Carbon Fibers, finally choosing for our new Brush a far greater quantity of new smaller fibers in order to more effectively sweep away micro-dirt, not just the less relevant visible dust.

To everyone who has an AQ Record Brush (thank you), or any brand of Carbon Fiber brush, and to everyone who hasn’t yet discovered how simple it is to keep records clean:

We invite you to experience the reborn AudioQuest Conductive Record Brush.

Your records will thank you!

• Safe, fast, and effective tool for removing dust and debris from vinyl records
• Conductive carbon fiber bristles and conductive gold contacts remove microscopic dust before it becomes embedded in the vinyl
• Keeps records sounding like new
• Also perfect for computer keyboards and much more

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

RIP Gibraltar, long live Castle Rock! Like Gibraltar before it, Castle Rock is designed as an extremely high-performance cable which provides true Double-BiWire performance in a single attractive cable. Original Gibraltar’s all important basics – superior geometry, magnetic autonomy of each quad-conductor section, Perfect-Surface metal technology, conductor-size optimization (AQ’s Spread-Spectrum Technology), etc. – are the fundamentals of Castle Rock. Castle Rock employs AQ’s best copper conductor metal (Perfect-Surface Copper+), AudioQuest’s DBS (Dielectric-Bias System) and NDS (Noise-Dissipation System).

A very recent advancement featured in Castle Rock (and all other Tree and Rock Series speaker cables) is the addition of the sleek new Hanging Silver 1000 Series Multi-Spades and Bananas. Originally developed for the WEL Signature Series speaker cables, these plugs are made using a Hanging Silver over pure Red Copper process in which the spades and bananas are submerged (“hung”) into a vat of extreme-purity silver, resulting in a very thick direct-silver plate. No intermediary performance-degrading materials (such as nickel or alloy) are used.

Also new to Castle Rock is a more-neatly-sculpted “breakout” (the covering where the cable separates into red and black legs), which is now made of a synthetic non-magnetic polymer, rather than metal. We’re making this all-models upgrade because speaker cables and AC power cables carry large magnetic fields which interact with any metal “collar” around the cable. Eliminating metal in the breakouts is another significant (and clearly audible) step forward in our goal of eliminating distortion and making the cable sonically "invisible."

Castle Rock represents the culmination of Gibraltar’s long-term evolution along with performance-enhancing new systems and materials. These ingredients add up to important audible improvements and more pleasurable listening!

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

You won’t have to wait 70 years to see this Comet. AudioQuest’s Comet Double Star-Quad speaker cable utilizes a carefully finessed amount of Solid Perfect-Surface Copper+ and Perfect-Surface Silver Conductors. The addition of Silver is startling. Silver has a colorless sound, allowing the exposure of more textural nuances found in the recording.

SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE SILVER (PSC+/PSS) CONDUCTORS: Comet uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ and PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK DISSIPATION SYSTEMS (INSULATION): The negative conductors in Comet are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Comet uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Comet allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM GEOMETRY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Comet allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

• Metal: Solid 4 x PSS / 4 x PSC+
  
• Gauge: 12 AWG
  
• Geometry: Double Star-Quad
  
• Dielectric: Foamed-Polyethylene (For All Positive Conductors)
  
• Noise-Dissipation System: Multi-Layer Carbon-Based Noise- and Crosstalk-Dissipation System
  
• Jacket: Black/Dark Gray Braid
  
• Terminations: Full-Range
  
• Standard Plug: Banana (Silver)
  

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

At the peak of AudioQuest’s Flat Rock series sits K2. Just like the mountaintop, from this vantage point there are very few options to look up toward. K2 combines Solid Perfect-Surface Silver Conductors with DBS and AudioQuest’s most successful Double Star-Quad Geometry. K2 will lift the sound of your system to near tropospheric heights.

SOLID 100% PERFECT-SURFACE SILVER (PSS) CONDUCTORS: Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials.

CARBON-BASED NOISE-DISSIPATION (INSULATION): The negative conductors in K2 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. K2 uses Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of K2 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in K2 allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE COPPER (PSC+/PSC) CONDUCTORS: Aspen uses a carefully finessed combination of high-purity Perfect-Surface Copper (PSC), and extreme high-purity Perfect-Surface Copper+ (PSC+) conductors in a Self-Shielding Double Counter-Spiral HyperLitz design. Solid conductors prevent strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface nearly eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

DIELECTRIC-BIAS SYSTEM (DBS, US PAT #S 7,126,055 & 7,872,195 B1): Insulation is an electrical barrier, and also a “dielectric” because it is inside the conductor’s magnetic field. All insulation slows down and smears the signal inside. When insulation is unbiased, it causes different amounts of delay for different frequencies and energy levels, a real problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. Saturated (full) insulation absorbs less and therefore releases less out-of-phase energy. Minimizing nonlinear time delays results in clearer sound emerging from a “blacker” background. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE COUNTER-SPIRAL GEOMETRY: Aspen and the other AQ “Tree” Series cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group, the negative conductors spiral in the opposite direction, which makes possible the significant performance advantage of the positive and negative conductors crossing each other instead of being parallel. However, the critical need for positive and negative to have a fixed non-changing relationship is ensured as the negative and positive groups are in fact two tubes with a perfectly consistent relationship. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.

CARBON-BASED NOISE-DISSIPATION AND CROSSTALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Aspen are covered with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and improved dimensionality that comes whenever RF interference is reduced in an audio circuit. Another carbon layer also damps interaction between positive and negative conductors, and an external 3-layer carbon-based NDS System additionally absorbs external interference.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any particular size still has a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Aspen allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

The mighty Oak is known for its strength and endurance, which are also qualities found in this speaker cable.

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Oak uses extremely high-purity Perfect-Surface Copper+ Conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Oak are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Oak uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE COUNTER-SPIRAL GEOMETRY: Oak and the other AQ “Tree Feature” cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors, spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest’s most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.

SPREAD-SPECTRUM TECHNOLOGY (SST):Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Oak allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

Redwood stands as a giant among its peers. The carefully finessed combination of Solid Perfect-Surface Copper+ and Perfect-Surface Silver conductors allow your music to present a sound field that is both large (as it was intended) and coherent. The addition of silver offers a significant improvement in ease and resolution.

SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE SILVER (PSC+/PSS) CONDUCTORS: Redwood uses a carefully finessed combination of Perfect-Surface Copper+ and extremely high-purity Perfect-Surface Silver conductors in a Self-Shielding Counter-Spiral HyperLitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSS further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

CARBON-BASED MULTI-LAYER NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEM (INSULATION): The negative conductors in Redwood are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Redwood uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE COUNTER-SPIRAL GEOMETRY: Redwood and the other AQ “Tree Feature” cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors, spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest’s most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST uses a precise combination of different size conductors in order to significantly reduce the audibility of these character flaws. The different SST-determined conductor sizes used in Redwood allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Option Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

RCA to JIS

With the addition of AudioQuest’s patented Dielectric-Bias System, Cougar brings a level of low-level clarity and resolution rarely seen at this price. Perfect-Surface Copper+ is the icing on the cake, raising Cougar’s performance significantly above Wildcat’s.

SOLID PERFECT-SURFACE COPPER+ CONDUCTORS (PSC+): Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Cougar’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Cougar’s very clean sound.

FOAMED-POLYETHYLENE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Cougar uses air-filled Foamed-Polyethylene Insulation because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

CARBON-BASED 2-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.

TERMINATIONS: Cougar’s Cold-Welded Direct-Silver Plated RCA plugs use a proprietary design that eliminates the distortion caused by the extra contact inside most plugs. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. A combination of these major ingredients, and many more subtle details add up to explain how Cougar can sound so clean, clear and dynamic.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Lightning to A

No matter how you choose to connect with your music and media, AudioQuest provides a high-quality cable specifically designed for the job. Our complete line of USB cables includes four models now available with Apple’s® Lightning™ connector (as used on all recent iOS devices). Whether you’re connecting mobile devices to the USB ports common to so many car audio systems or streaming content to a home entertainment system, a high-quality, low-distortion cable is required for sound that is full-bodied, engaging, and three-dimensional. Thin and flat is a great look for an iPhone or iPad®, but it’s not how the music from those marvelous devices should sound!

SOLID 0.5% SILVER CONDUCTORS: Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like USB audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality USB cables.

HARD-CELL FOAM INSULATION: Hard-Cell Foam insulation is used exclusively in most of AudioQuest’s video and digital audio cables. Similar to Foamed-PE, it is nitrogen injected to create air pockets. ‘Hard’ foam is used because the stiffness of the material allows the conductors in the cable to maintain the same relationship with each other along the full length of the cable, thus ensuring that the characteristic impedance of the cable is consistent.

METAL-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

AudioQuest’s high-speed digital cables, including FireWire, Ethernet, and USB, have garnered near-universal acclaim from reviewers, manufacturers, dealers, and audio/ video enthusiasts. Now we are delighted to introduce our high-speed, low-distortion Thunderbolt Coffee cable. Thunderbolt cable technology provides outstanding connectivity between computers and electronic devices, supporting up to six devices over eight lanes of high-speed (10GBps) communication, making it one of the most useful and innovative hardware interfaces available today.

This powerful, versatile technology can connect to a wide variety of devices, including peripherals, displays, storage, docking stations, audio/video devices, and more. For audio enthusiasts, Thunderbolt offers the highest playback performance of any storage connectivity option currently available. There are three key reasons for this:

1. SPEED: Simply put, Thunderbolt provides the fastest connection to your computer. Moreover, there is a direct and clearly audible correlation between higher data transfer speeds and better sonic performance.

2. LIGHTER RESOURCE LOADS: Thunderbolt uses significantly less processor overhead than USB 2.0, USB 3.0, FireWire, and Ethernet. It intelligently maps out signal paths and efficiently prioritizes resources for each associated device, limiting the amount of required operational overhead. And, just as higher speed correlates with better sound, so, too, do lighter resource loads. As resource loads decrease, audio performance improves.

3. LOW LATENCY: Thunderbolt’s extremely low latency, combined with its remarkably accurate time synchronization, greatly improves both audio and video playback—even when being used to only transfer files from a hard drive to a computer.

Thunderbolt technology benefits from AQ’s use of high-quality materials, meticulous design, and precise manufacturing. Coffee Thunderbolt uses Solid 10% Silver conductors. Total shielding and minimally interactive insulation further reduce distortion and timing errors, enabling greater clarity, resolution, and naturally beautiful sound. Extremely specialized equipment must be used to manufacture the very thin Solid FEP dielectric used in Thunderbolt cables. AudioQuest’s manufacturing and tooling processes, combined with our careful use of superior materials, ensures that our Thunderbolt cables will not compromise the original signal, enabling the best possible transfer of your music files. When it comes to your music, beautiful sound is never just ones and zeros.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

The 4-Series of AudioQuest speakers cables may be the most successful in AudioQuest’s 30+ year history. Type 4’s roots go all the way back to the late 80’s. The fundamental geometry and conductor complement of Type 4 hasn’t changed since 1995 … because any change to the size or position of the 4-Series’ 2-sized Spread-Spectrum conductor arrangement would reduce performance.

SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS: Type 4’s solid Long-Grain Copper allows a smoother and clearer sound than cables using typical OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. All four of Type 4’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Type 4’s very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables. Type 4 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The two negative conductors in Type 4 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Type 4 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Star-Quad construction of Type 4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in Type 4 allow an exceptionally clear, clean and dynamic

*Different Terminations & Multi-Spade Plug Options Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

GO-4 is a step up in the Star-Quad series by virtue of offering higher-quality metal and the addition of AudioQuest’s patented Dielectric-Bias System. These two advancements significantly better the performance of Type 4, the most successful speaker cable in our 30+ year history.

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: GO-4 uses extremely high-purity Perfect-Surface Copper+ conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure PSC+ eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The two negative conductors in GO-4 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. GO-4 uses air-filled Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Star-Quad construction of GO-4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The different SST-determined conductor sizes used in GO-4 allow an exceptionally clear, clean and dynamic sound.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

*Different Terminations & Multi-Spade Plug Options Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

This Double Star-Quad Geometry “Rocket” cable does not look normal on the outside, and it is not at all normal on the inside. A sophisticated combination of extraordinary materials and extremely refined design allows the Rockets to honor all types of music equally.

SOLID LONG-GRAIN COPPER/PERFECT-SURFACE COPPER (LGC/PSC) CONDUCTORS: Rocket 33 uses a carefully finessed combination of Long-Grain Copper and extremely high-purity Perfect-Surface Copper. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 33 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 33 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the “out-of-focus” effect common to other materials.

DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 33 allows for significantly improved dynamic contrast and intelligibility compared to parallel conductors.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 33 allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Options Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

Rocket 44 incorporates Perfect-Surface Copper+ into its blend of conductors. PSC+ has fewer grain boundaries, which reduces harshness in the sound. This carefully finessed combination of PSC and PSC+ enables Rocket 44 to deliver a clear and faithful presentation.

SOLID PERFECT-SURFACE COPPER+/PERFECT-SURFACE COPPER (PSC+/PSC) CONDUCTORS: Rocket 44 uses a carefully finessed combination of extremely high-purity Perfect-Surface Copper+ and Perfect-Surface Copper. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity. Rocket 44’s conductor mix is dominated by PSC+.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 44 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 44 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the “out-of-focus” effect common to other materials.

DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 44 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 44 allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Options Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Full Range Termination with Banana (Silver) Plug*

Custom Lengths Available Upon Request

Rocket 88 incorporates AudioQuest’s patented Dielectric-Bias System (DBS) and replaces Long-Grain Copper with solid Perfect-Surface Copper+. DBS offers a lower noise-floor, so you can hear deeper into the nuances of your favorite music. At the same time the addition of more PSC+ offers a smoother, more relaxed, and natural sonic timbre and texture.

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Rocket 88 uses a carefully finessed, optimized and extremely high-purity Perfect-Surface Copper+. The astonishingly smooth and pure combination of PSC+ significantly eliminates harshness and greatly increases clarity. Rocket 88’s conductor mix is PSC+.

CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 88 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 88 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the “out-of-focus” effect common to other materials.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1): All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 88 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.

SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 88 allow an exceptionally clear, clean and dynamic sound.

*Different Terminations & Multi-Spade Plug Options Available Upon Request

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Offering a unique combination of unsurpassed comfort, state-of-the-art design, and naturally beautiful sound, AudioQuest’s first headphone, NightHawk, has been lovingly featured in the pages of magazines and websites as far-reaching as Stereophile, Rolling Stone, CNET, Wired, Head-Fi, Digital Trends, The Verge, and many more. This is evidence of the intensifying convergence between the high-fidelity and high-technology worlds, and testament to NightHawk’s uncanny ability to captivate and inspire a diverse audience of thinkers, builders, engineers, and, of course, music lovers.

While NightHawk’s many innovative design elements— Liquid Wood earcups, biomimetic sound-diffusing grilles, and high-performance solid-conductor cable, to name just a few—have impressed listeners worldwide, many have expressed interest in different paint finishes, more versatile cables, and closed-back designs.

AudioQuest takes the first of many steps toward satisfying those interests with two new around-the-ear models: NightHawk Carbon and NightOwl Carbon.

NightHawk Carbon is a more sophisticated, more mature version of the original. It boasts all of the same exciting refinements found in NightOwl—improved performance, greater comfort, two pairs of earpads, a far more durable cable with mic and smartphone controls, enhanced look and feel —all while retaining its predecessor’s remarkably low distortion and fatigue-free sound.

Acoustic Refinements

• Modified internal parts: Tighter tolerances reduce air leakage for improved airflow and lower distortion
• Two sets of earpads: Protein Leather Boost Pads seal tighter for better isolation and slightly enhanced treble clarity; Microsuede Pads breathe freer for greater comfort and slightly reduced bass impact
• Improved plugs: High-purity Tellurium Copper (TeCu) base metal for smoother surface, higher plating quality, better mating contact, and, consequently, less noise

Ergonomic Refinements

• Improved headpad: Genuine leather headpad with stitched detailing for enhanced comfort, more luxurious look and feel
• Improved cable: Shorter (4.25ft) length for easier use at the desktop or with mobile devices; flexible, nonbraided jacket increases durability, eliminates kinking, minimizes microphonics; robustly engineered and rigorously tested strain relief further increases durability; discrete microphone and smartphone controls enable phone calls and playback functions (Play, Pause, Skip) without compromising sound quality

Cosmetic Refinements

• Luxurious finish: Porsche Carbon Grey Metallic highgloss paint meticulously applied via multistage process
• Improved inner presentation: Includes microfiber pouches for headphones and accessories for safer, simpler travel

Of course, all of the advanced design elements that made the original NightHawk such a success are carried over into the improved models. NightHawk Carbon and NightOwl Carbon share their predecessor’s pistonic drivers with biocellulose diaphragms, compliant rubber surrounds, and true voice-coil formers. The patented splitgap motor remains unsurpassed in its ability to reduce intermodulation distortion. The earcups are fabricated from the same revolutionary Liquid Wood material, which affords acoustically optimized support beams and carefully applied damping. The patent-pending suspension system allows the earcups to move freely, accommodating heads of almost any shape or size, while effectively decoupling the earcups to counteract resonances.

Thus, NightHawk’s exceedingly low distortion, unrivaled comfort, and naturally detailed sound have been enhanced in every meaningful way. With the new semiopen NightHawk Carbon and closed-back NightOwl Carbon headphones, you can listen longer, later, and with greater pleasure, enjoying even deeper immersion in your favorite music, movies, videos, and games.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

Offering a unique combination of unsurpassed comfort, state-of-the-art design, and naturally beautiful sound, AudioQuest’s first headphone, NightHawk, has been lovingly featured in the pages of magazines and websites as far-reaching as Stereophile, Rolling Stone, CNET, Wired, Head-Fi, Digital Trends, The Verge, and many more. This is evidence of the intensifying convergence between the high-fidelity and high-technology worlds, and testament to NightHawk’s uncanny ability to captivate and inspire a diverse audience of thinkers, builders, engineers, and, of course, music lovers.

While NightHawk’s many innovative design elements— Liquid Wood earcups, biomimetic sound-diffusing grilles, and high-performance solid-conductor cable, to name just a few—have impressed listeners worldwide, many have expressed interest in different paint finishes, more versatile cables, and closed-back designs.

AudioQuest takes the first of many steps toward satisfying those interests with two new around-the-ear models: NightHawk Carbon and NightOwl Carbon.

The closed-back NightOwl Carbon further advances the state of the headphone art, replacing NightHawk’s sound-diffusing grille with an intelligently designed aperiodic damping system for excellent isolation of both external noise, and ensuring privacy for the listener and those nearby.

Hidden beneath the central circular portion of NightOwl’s earcups, a vent runs along the perimeter of each dome and exits through a hidden airflow-resistive port. Thus, unlike other headphones that use a sealed enclosure, NightOwl is designed to effectively relieve the buildup of pressure, allowing the drivers to breathe freely, ensuring that any impulses quickly return to an innocuous resting state—with no ringing, oscillation, or resonance. Further, we’ve implemented several closely related acoustic, ergonomic, and cosmetic refinements, each of which seamlessly complements the whole, delivering improved performance while elevating the overall user experience.

Acoustic Refinements

• Modified internal parts: Tighter tolerances reduce air leakage for improved airflow and lower distortion
• Two sets of earpads: Protein Leather Boost Pads seal tighter for better isolation and slightly enhanced treble clarity; Microsuede Pads breathe freer for greater comfort and slightly reduced bass impact
• Improved plugs: High-purity Tellurium Copper (TeCu) base metal for smoother surface, higher plating quality, better mating contact, and, consequently, less noise

Ergonomic Refinements

• Improved headpad: Genuine leather headpad with stitched detailing for enhanced comfort, more luxurious look and feel
• Improved cable: Shorter (4.25ft) length for easier use at the desktop or with mobile devices; flexible, nonbraided jacket increases durability, eliminates kinking, minimizes microphonics; robustly engineered and rigorously tested strain relief further increases durability; discrete microphone and smartphone controls enable phone calls and playback functions (Play, Pause, Skip) without compromising sound quality

Cosmetic Refinements

• Luxurious finish: Porsche Carbon Grey Metallic highgloss paint meticulously applied via multistage process
• Improved inner presentation: Includes microfiber pouches for headphones and accessories for safer, simpler travel

With the new semiopen NightHawk Carbon and closed-back NightOwl Carbon headphones, you can listen longer, later, and with greater pleasure, enjoying even deeper immersion in your favorite music, movies, videos, and games.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

AudioQuest is pleased to present Perch—a headphone stand ideal for safely storing and displaying NightHawk, NightOwl, and other headphones. With its heavy base of die-cast zinc, tall strong steel frame, and curved eco-leather headband support, Perch provides an attractive, structurally sound foundation for any headphone, regardless of earcup size, headband construction, or cable length.

Many popular headphone stands are designed a way that causes the accompanying headphone to hang askew or forces the headband to open wide, thereby gradually misshaping the headpad and earpads, and placing undue tension on the headband. Over time, such headphone stands can actually harm their accompanying headphone, straining the important ergonomic elements that contribute to comfort and wearability.

Perch, however, allows the headphone to rest naturally, evenly distributing its weight across the entire headpad, never placing stress on the band, and ultimately preserving the headphone’s structural integrity. Further, unlike other designs that require the owner use two hands merely to place or remove headphones, Perch’s design allows for simple one-handed access.

Perch requires no assembly. Just add headphones.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

RCA to RCA

XLR & Custom Lengths Available Upon Request

Meaning “Big River” in Athabaskan, the Yukon River starts with the Llewellyn Glacier as its source in British Columbia, and empties into Alaska’s Bering Sea. It may have been the first immigration route for North America’s first indigenous humans, and was certainly the principle means of travel during the 1896-1903 Klondike Gold Rush. Paddle-wheel riverboats continued as the dominant form of transportation along the river until the 1950s when the Klondike Highway was completed. King Salmon from the Yukon River remain an elusive, but prized delicacy.

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Yukon’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Yukon’s very clean sound.

POLYETHYLENE AIR-TUBE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Yukon’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.

CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane.

TRIPLE-BALANCED GEOMETRY: The three conductors in “Triple-Balanced” Yukon cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.

COLD-WELDED HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER PLUGS: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers’ plugs.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

RCA to RCA

Different Connection Types & Longer Lengths Available Upon Request

Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.

The image of London’s dramatic Tower Bridge is so famous that it is often mistakenly thought of as London Bridge. Tower Bridge, completed in 1894, is an unusual combination of suspension bridges on the land side of the towers, and dual bascule spans in the center. As with the many bascule bridges in St. Petersburg, Russia and over the Chicago River, moving this weight-balanced roadway requires comparatively little energy, making it very efficient for allowing river traffic to pass. Tower Bridge’s original hydraulic accumulators were a significant advance in storing the energy required to be able to open the two 1,000 ton bascules in only five minutes.

SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS: Solid conductors eliminate strand-interaction distortion. Evergreen’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

FOAMED-POLYETHYLENE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

METAL-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

COLD-WELDED, GOLD-PLATED TERMINATIONS: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.

Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.

RCA to RCA

Different Connection Types & Longer Lengths Available Upon Request

Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. In Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.

Spanning a creek and a formidable travel-impeding canyon, the Bixby Creek Bridge compliments and counterpoints the majestic beauty of California’s spectacular coastline just north of Big Sur, 190km (120 miles) south of San Francisco. As an integral part of this stretch of landscape, the bridge has been featured in numerous TV shows and movies, and is seen on travel posters all over the world

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Big Sur’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Big Sur’s very clean sound.

FOAMED-POLYETHYLENE INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Big Sur uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

METAL-LAYER NOISE-DISSIPATION SYSTEM (NDS): 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY: Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

COLD-WELDED, GOLD-PLATED PURE PURPLE COPPER TERMINATIONS: This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers’ plugs.