Complete Analog Turntable System 2
- Product Code:
- Rega | Kimber Kable
- Complete Analog System 2
- Rega Planar 3 Black With Elys 2 | Rega Brio-R | Rega RX3 Speakers | 4TC Kimber Kable
Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.
Need a stereo system? This kit includes everything you need to get an amazing soundsystem set up!
Rega RP3 Cool Grey Turntable + Elys 2 Cartridge - Click here for more info
Rega Brio-R Integrated Amp - Click here for more info
(2) Rega RX3 Speakers - Black Ash - Click here for more info
4TC Kimber Kable - 8ft SBAN Connector
4-1/2” H x 17-1/2” W x 14” D
Rega Brio-R Dimensions:
13.5" x 8.5" x 3.25"
Rega RX3 Dimensions:
32" x 10" x 9"
RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.
- Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers.
- Rega made, new low capacitance phono cable with Neutrik plugs,
- Improved lower friction, precision horizontal and vertical bearings
- New design 100g mild steel balance weight.
Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white
Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.
Bearing housing – Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.
Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.
Platter - New float glass ‘Optiwhite’ polished rim 12mm – Improved accuracy in manufacture and stunning looks.
Re-designed foot - New improved foot to increase stability and reduce vibration transfer.
24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).
Motor cover tray with integrated cooling.
Factory fitted Elys2 MM
50w RMS pc into 8W
73w RMS pc into 4W
Rega brand new custom manufactured case
Rega phono stage (Input 1)
Toroidal mains transformer
Sanken 150w output transistors
Varistrand Hyper-pure copper
2 x 13 AWG conductors
Clear & white Fluorocarbon dielectric
9″ arm wand (227mm effective length)
Rega three-point cartridge mounting, plus standard two-point
three-point arm mount for ultimate stiffness
New bias assembly
re-designed stiffer vertical bearing housing
new integrated arm clip and
improved spring housing with easier to read numbers
improved “zero-tolerance” low friction precision horizontal and vertical bearings
improved arm wand redesigned using 3D CAD/CAM for redistributed mass, netting lower resonance and improved strength
new Rega-made low capacitance phono cable with Neutrik plugs
New design 100g mild steel balance weight increases dustcover clearance
Rega Brio-R Specifications:
Input sensitivities for rated output level:
Input 1 (Phono) input sensitivity = 2.1mV at 47KΩ in parallel with 220pF
Maximum Input 1 (Phono) input level = 100mV
Input 2 to 5 (Line) input sensitivity = 210mV at 47K
Maximum Input 2 to 5 (Line) input level = 10.25V
Power outputs at 230/115V supply voltage:
50Watts RMS both channels driven into the rated load of 8F
58Watts RMS one channel driven into the rated load of 8F
73Watts RMS both channels driven into the rated load of 4F
93Watts RMS one channel driven into the rated load of 4F
Continued high level use into 4F may cause the case to exceed 40° C above the ambient temperature.
195Watts at 230/115V into the rated load of 8F
Record output level:
Record output level (with rated input levels) = 210mV
Record output impedance = 470F
Phono 15Hz to 40KHz (-3dB points) / 27Hz to 20.5KHz (-1dB points)
RIAA accuracy (100Hz to 10KHz) ± 0.4dB typically better than ± 0.3dB
Line 12Hz (-1dB points) to 43KHz (-3dB points)
Rega RX3 Speaker Specifications:
Nominal Impedance: 6ohms
Sensitivity (Approx): 89dB
Power Handling: 100w per channel
Kimber Kable 4TC Cable Specifications:
DUT: 4TC 2.5m bare wire ends
(Cp) parallel capacitance: 362.0 pF @ 20 kHz
(Ls) series inductance: 0.715 µH @ 20 kHz
(Rdc) dc loop resistance: 0.038 Ω
(Xt) total reactance: 0.071 Ω @ 20 kHz
Frequency response ± 0.5 dB: dc - 500 kHz
There are no reviews for this product.
Customers who bought Complete Analog Turntable System 2, also bought:
There are no reviews for this product.