Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
Mem Day Sale 2018
Home > Products for: '

Adjust

'
Results per page:
  • JMW-10 Tonearm JMW-10 Tonearm Quick View

    $1,000.00
    Buy Now
    x

    JMW-10 Tonearm


    Pivot to spindle distance: 258mm

    Effective length: 273.42mm

    Effective mass: 11g

    Overhang: 15.42mm

    Offset angle: 19.98 degrees

    Average RMS distortion: .311%

    Armtube critically damped internally with 1.7 pound foam.

    Premium Discovery wire used internally, optional Nordost Reference wire.

    Unipivot design with zero friction and zero bearing chatter.

    Dropped counterweight for tracking force and azimuth adjustment and low center of gravity.

    Adjustable anti-skate settings if needed.



    VPI Accessories
    $1,000.00
    Tonearm Buy Now
  • 3-Point Adjustable Spacer 3-Point Adjustable Spacer Quick View

    $29.00
    Buy Now
    x

    3-Point Adjustable Spacer

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    3 Pt Adjustable Spacer


    Not compatible with the new Planar models


    2, 4, 6, or 8 mm adjustable plastic spacer fits RB100/101/202/251/301/303

    Rega
    $29.00
    Rega Adjustable Spacer Buy Now
  • Crosley CR6250A-BK Keepsake Deluxe Portable and Adjustable USB Turntable (On Sale) Crosley CR6250A-BK Keepsake Deluxe Portable and Adjustable USB Turntable (On Sale) On Sale Quick View

    $199.99$169.99Save $30.00 (15%)

    Buy Now
    x

    Crosley CR6250A-BK Keepsake Deluxe Portable and Adjustable USB Turntable (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Take the portability and charm of Crosley's suitcase-style turntable, combine it with high-end features and stellar performance, and bam! You've got the Keepsake Deluxe. Powerful but easy-to-use, this awesome turntable offers a built-in pre-amp or the chance to use your own, a sharp Audio Technica moving magnetic cartridge carried by a slick S-shaped tonearm. Adjustable counterweights and pitch control will keep music in line and the needle on point. All of this, neatly stashed in a beautiful vintage-inspired package.




    Crosley
    $199.99 $169.99 Save $30.00 (15%)
    CR6250A-BK Keepsake Deluxe Portable and Adjustable USB Turntable Buy Now
  • Smart Stylus Gauge Smart Stylus Gauge Quick View

    $25.00
    Buy Now
    x

    Smart Stylus Gauge

    This mechanical tracking force gauge is the easiest way to adjust the cartridge's tracking force.



    Clearaudio Accessories
    $25.00
    Smart Stylus Gauge Buy Now
  • Thorens TP 92 Thorens TP 92 Quick View

    $999.00
    Buy Now
    x

    Thorens TP 92


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Thorens Precision Tonearm


    The TP 92 is a nine-inch cardanic design that follows the Loefgren geometry. It was developed in parallel with the TD 309 turntable, which allowed our designers to achieve optimal compatibility. The horizontal bearing is a high-precision Japanese ball bearing that uses a specially developed oil. It is located underneath the tonearm tube at the same level as the stylus for enhanced stability. The counterweight, decoupled by two rubber rings, is also exactly level with the stylus.


    The tonearm tube is manufactured from high-quality cold-forged aluminium. A laser vibrometer was used to analyse the tube's resonances, enabling our designers to target specific frequencies.


    The headshell is also made from aluminium and tightly coupled to the tube for increased stability. Overhang can be adjusted either by sliding the headshell into the desired position on the tube or by adjusting the entire tube in the bearing block. The tube can also be rotated on its axis in order to adjust azimuth. The shape of the headshell ensures that the pick-up cartridge's centre of gravity is always directly underneath the tonearm tube, thus preventing torsional vibrations.


    VTA can be easily adjusted by loosening the arm collar lock nut and raising or lowering the entire tonearm. The anti-skating force is provided by two ferrite magnets and can be increased or decreased with the help of an adjustment screw.


    Thorens Turntables
    $999.00
    Thorens TP 92 Tonearm Buy Now
  • Fosgate Signature Fozgometer Azimuth Range Meter Fosgate Signature Fozgometer Azimuth Range Meter Quick View

    $300.00
    Buy Now
    x

    Fosgate Signature Fozgometer Azimuth Range Meter

    2012


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Fozgometer Azimuth Range Finder


    The FOZGOMETER represents a breakthrough for adjusting phono system azimuth.


    To obtain high performance from a modern phonograph system, the tonearm and pickup cartridge must be properly adjusted to within a few thousands of an inch. There are several alignment gauges available to adjust overhang and offset. To adjust cartridge azimuth (Axial Tilt), it has been necessary to use lab quality equipment and a test record. Azimuth may be adjusted using an oscilloscope, AC voltmeter, or computer program. These methods can be expensive and time consuming.


    The FOZGOMETER incorporates a "Log Ratio Detector" developed for surround processor steering logic circuits to measure channel separation over a wide range of signal levels down to -70 dB. The readings are virtually independent of overall signal levels, and can be made with a wide range of input signals without effecting accuracy. It is a small portable battery powered unit that is used in conjunction with a test record. It measures channel separation, channel balance, and signal direction quickly and accurately. Readings are taken without touching the meter, leaving your hands free to work with the tonearm. The meter reads channel separation in both directions, and channel balance. The LED's indicate Left, Center, and Right signal (test tone) positions.


    Fosgate
    $300.00
    Fosgate Signature Fozgometer Azimuth Range Meter Buy Now
  • Pro-Ject Signature 12 Turntable 6 OPTIONS AVAILABLE Pro-Ject Signature 12 Turntable Quick View

    $12,000.00
    Buy Now
    x

    Pro-Ject Signature 12 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    High-end audiophile turntable with fully adjustable 12 S-shaped tonearm, dampened sub-chassis, continuous speed control, and mass-loaded plinth


    The Signature turntable is Pro-Ject's all-out assault on the analog high-end.


    This no compromise approach to vinyl playback design commemorates Pro-Ject's 20-years as an esteemed manufacturer of turntables and electronics. Each table takes 3 months to build and is entirely constructed and assembled by a team of two highly skilled craftsman - truly an artisan product!


    Signature employs a highly sophisticated approach by combining the themes of mass loading and magnetic decoupling. The main plinth supports two plinths and two motors with a belt-driven flywheel system that is magnetically decouples the platter's bearing. The main plinth also houses the touch screen that allows control of all operational parameters and variable speed adjustment. The second plinth is made of aluminum sits beneath the platter and is responsible for supporting the magnetic suspension. Sorbothane Pillows isolate the entire assembly and further reduce unwanted disturbances and vibration. The flywheel belt-drive system employs two motors and ensures vibration and noise-free mechanical operation for all moving parts.


    The advanced single-pivot 12 tonearm can accommodate virtually any cartridge due to its wide range of adjustment possibilities and selection of different counterweights. It is even possible to adjust the VTA while the record is playing!


    Optional SuperPack includes Sumiko Palo Santos Presentation Cartridge at a significantly reduced price.


    Pro-Ject
    $12,000.00
    Signature 12 Turntable - 3 Colors Available - SuperPack Option
    Buy Now
  • Crosley C10A Hardwood Turntable (On Sale) 2 COLORS AVAILABLE Crosley C10A Hardwood Turntable (On Sale) On Sale Quick View

    $399.99$349.99Save $50.00 (13%)

    Buy Now
    x

    Crosley C10A Hardwood Turntable (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Warm wood combines with awesome audio machinery in the Crosley C10. Equipped with a low-vibration synchronous motor and shock absorbent feet to give any genre of music a smooth ride. The Project aluminum tonearm is balanced with adjustable counterweights, anti-skate adjustment and armed with a pre-mounted Ortolan OM5e cartridge for sound as beautiful as the C10 looks.


    Crosley is stepping up its game with an amazing cooperation from legendary tonearm manufacturers Pro-Ject. The C10 is a mashup of Crosley's vintage-infused style and high-end features.


    Find Balance


    While the C10 already comes armed with an awesome pre-adjusted Ortofon OM5e cartridge, the tonearm rests on sapphire bearings and also sports counterweights to adjust for your choice of phono cartridge. Best of both worlds.


    Be A Matchmaker


    Pair the C10 with the phono preamp of your choice to completely customize your listening experience.


    Knock On Wood


    The plinth is constructed with audio-grade MDF encased in genuine birch veneer, polished to a satiny finish. So fresh!


    Above The Belt


    The turntable is belt-driven, so it can play at 33RPM and 45RPM with the flip of a switch. The platter itself turns on a stainless steel bearing running in a bronze bushing with a Teflon bottom. The small feet on the bottom of the plinth are shock-resistant to keep vibration as minimal as possible.




    Crosley
    $399.99 $349.99 Save $50.00 (13%)
    C10A Hardwood Turntable - 2 Colors Available
    Buy Now
  • Crosley 45 Adapters (12-Pack) Crosley 45 Adapters (12-Pack) Quick View

    $9.99
    Buy Now
    x

    Crosley 45 Adapters (12-Pack)

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    No reason to be grumpy about being single! These 45 Adaptors adjust the spindle size to accommodate for the wider spindle hole of a 45rpm record. Truly a transforming experience!

    Crosley
    $9.99
    45 Adapters (12-Pack) Buy Now
  • Ortofon Stereo Test Record Ortofon Stereo Test Record Quick View

    $49.99
    Buy Now
    x

    Ortofon Stereo Test Record

    Ortofon's new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable.


    Before testing your cartridge, please verify the HiFi system's functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
    The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.


    Please refer to your turntable and tonearm's instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge's recommended technical data, and adjust stylus overhang.

    Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:


    1. Frequency Sweep Left Channel 800 Hz - 50 kHz. Log. 28 sec. Linear cut* (800 - 20000 Hz ±1,5 dB)
    2. Frequency Sweep Right Channel 800 Hz - 50 kHz. Log. 28 sec. Linear cut* (800 - 20000 Hz ±1,5 dB)
    3. Frequency Sweep Left Channel 800 Hz - 50 kHz. Log. 28 sec. Linear cut* (800 - 20000 Hz ±1,5 dB)
    4. Frequency Sweep Right Channel 800 Hz - 50 kHz. Log. 28 sec. Linear cut* (800 - 20000 Hz ±1,5 dB)
    5. Reference tone 1000 Hz 5 cm/sec rms Left
    6. Reference tone 1000 Hz 5 cm/sec rms Right
    7. Reference tone 1000 Hz 5 cm/sec rms Left
    8. Reference tone 1000 Hz 5 cm/sec rms Right
    9. Tracking ability, lateral 50 m peak
    10. Tracking ability, lateral 60 m peak
    11. Tracking ability, lateral 70 m peak
    12. Tracking ability, lateral 80 m peak
    13. Tracking ability, lateral 90 m peak
    14. Tracking ability, lateral 100 m peak
    15. Square Wave Form 2.7 msec duty cycle 3:7
    * The record has a constant velocity amplitude throughout the sweep.


    1-4 Frequency sweep - a tool for checking frequency response
    There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.


    5-8 Reference tone for testing channel output
    With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.


    9 -14 Tracking ability test, 315 Hz lateral modulation
    These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge's tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.


    15. Square Wave Form 2.7 msec duty cycle 3:7
    When monitoring the output of your cartridge with an oscilloscope you'll then see a square wave located precisely above each other if the connection from the cartridge is correct.


    After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

    Ortofon
    $49.99
    Ortofon Stereo Test Record Buy Now
  • Soundsmith Counter Intuitive Soundsmith Counter Intuitive Quick View

    $49.95
    Buy Now
    x

    Soundsmith Counter Intuitive

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    For VPI Unipivot Tonearms


    The Soundsmith Counter "Intuitive"


    VPI turntables tonearms:


    3-D tone arms

    JMW-9t

    JMW-9 Signature

    JMW-10.5i

    The Classic Arm

    JMW-12.7


    A must have device for VPI owners who have dreamed of a way to easily adjust both tracking force and azimuth ~ without losing one setting while adjusting the other ~ we introduce the Soundsmith Intuitive.


    Now, for the first time ever, its delightfully easy to INDEPENDENTLY adjust your VPI tonearm to the exact tracking force and azimuth for optimal alignment, and to return to that setting easily and quickly. Peak performance done simply. Calibrated scales allow quick tweaking for accurate comparison of different settings.


    Each Intuitive is carefully hand machined for a precision fit out of a thermally stable, highly damped polymer material, with installed brass weights. Designed to last a lifetime....


    Kit includes two adhesive scales and attachment weight.

    Sound-Smith
    $49.95
    Counter Intuitive Buy Now
  • The Ultimate Analogue Test LP The Ultimate Analogue Test LP Quick View

    $39.99
    Buy Now
    x

    The Ultimate Analogue Test LP

    Editors Editors Editors Editors


    Analogue Productions set out to produce the ultimate test record.


    We've consulted many experts in the field, including mastering engineers, audio experts, turntable experts and audiophile listeners, to create a test record that's never been made before. When Barry Wolifson from Sterling Sound in New York City called us with the same idea we had been thinking about - that being to create the ultimate test record - he and our audio expert Clark Williams began to brainstorm and research ideas until they were both completely satisfied with what should go on the record.


    Most of the test records in the past have been made to test a variety of equipment. This test record excludes silly cannon shots, typewriters, voices on one channel and other useless fluff. This one specifically addresses your turntable and cartridge. It's designed to provide the basic test signals necessary to calibrate a turntable or cutting lathe as simply as possible. Most of the signals have specific implications, but it is certainly possible to use them in any number of novel ways.


    This record was mastered and cut on a Neumann VMS 80 lathe at Sterling Sound and pressed at Record Technology, Inc. on high-quality, 180-gram virgin vinyl.


    Side 1

    General Reference Level

    This 1 kHz reference tone will allow you to establish a "base level" for all measurements.
    Track 1 1Khz reference tone 7cm/s Mono, in phase (Lateral)

    Basic reference for all measurements, adjust meter for maximum convenience (in the studio 0VU).
    Adjust preamp channel balance for equal output.
    Also used to check the offset angle of the photo cartridge; L&R signals should be exactly in phase as displayed on an oscilloscope.


    Azimuth Adjustment

    Track 2 1kHz reference level Left channel only

    Measure Right channel output.

    Track 3 1kHz reference level Right channel only

    Measure Left channel output.

    The object is to sit the stylus exactly perpendicular in the groove.

    Twist cartridge about its radial axis until the measurements from Track 2 and Track 3 are equal or very close to equal for both channels.


    High Frequency Adjustment

    Tracks 4, 5 and 6 are used to calibrate the RIAA high frequency equalizer of a phono preamp. This will be used to calibrate a mastering lathe's phono preamplifier or any phono preamplifier that has these adjustments.

    Track 4 1 kHz tone at -20 below reference level, Lateral

    Reference for High Frequency test.

    Track 5 10 kHz reference tone at -20dbu, Lateral
    Adjust the high frequency until the output level equals that of Track 4.

    Track 6 1 kHz to 20 kHz sweep at -20dbu, Mono (Lateral)

    The AC millivoltmeter reading should stay constant across all frequencies. There are a number of factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the 10 kHz adjustment, a better overall frequency response can be achieved.


    Low Frequency Adjustment

    Tracks 7 & 8 are used to calibrate the RIAA low frequency equalizer of a phono preamp.

    Track 7 1 kHz to 20 Hz sweep at 0 VU (Lateral)

    Play Track 7 and measure the output with your AC millivolt meter.

    Ideally, the output will be flat across all frequencies. When viewed on an oscilloscope, the amplitude would remain constant during the frequency downsweep.

    Track 8 100 Hz reference tone at 0 vu (Lateral)
    Adjust LF Eq to reference (which is your reading from Track 1).


    Track 9 VTA adjust

    This is an IEC intermodulation distortion (IMD) test signal; 60Hz & 4kHz 4:1 ratio.

    Using an IMD tester, adjust VTA by raising or lowering the tonearm for minimum distortion.


    Track 10 Standard Wow & Flutter test signal; 3150Hz
    The Wow & Flutter meter will give dynamic speed variations as a percentage deviation from nominal.

    Also, the frequency counter should read exactly 3150 Hz for nominal speed. You can use the Hz function on your multi-meter (if so equipped) to verify speed here as well. You can also use to find the measurements at 45RPM. The correct reading at 45RPM would be 4253 Hz (45/33.33) x 3150.


    Side 2

    Track 1 Anti-skating test; 315Hz amplitude sweep to +12dbu (Lateral)

    Signal should remain clean in both channels up to the highest level, both audibly and as viewed on an oscilloscope. In case of distortion, increase anti-skating force or decrease anti-skate until breakup occurs equally in both channels. The left channel information is inscribed on the inner groove wall, the right channel information, on the outer groove wall. Because of the offset angle of a pivoted tonearm, a constantly varying vector force biases the arm towards the center of the record causing the stylus to lose contact with the outer (i.e. right channel) groove wall. Both linear and modulated groove velocity, tracking force, stylus profile, and vinyl composition are contributing factors. The anti skating force attempts to ameliorate this by applying an opposing similar force.

    It is also accepted that the overall force vector increases as the tonearm approaches closer to the spindle or end of the record.


    Track 2 Pink noise lateral

    Track 3 Pink noise vertical

    Used for cartridge "demagnetizing"

    You can also use this track to loosen up the cantilever's suspension to help break in a new cartridge. Play these tracks five to ten times after every 300 hours of normal LP playback.


    Track 4 1kHz @ reference level, vertical
    This out-of-phase signal should cancel to nothing when summed to mono.

    Any signals still present are distortion artifacts, lack of channel balance, or timing (phase) anomalies. This test can be a second confirmation of anti-skate adjustment.


    Track 5 1kHz to 10Hz sweep @ -20 below

    reference level, vertical
    Resonance anomalies in the tonearm / cartridge interface will show up as amplitude peaks and dips as the frequency sweeps down.

    Once again, by listening in 'Mono' it is easier to hear the distortion artifacts.


    Track 6 Silent groove for bearing rumble and table isolation

    During playback of this track, nothing should be transmitted from the turntable to the speakers. Replay the track and gently tap on the rack or base that the turntable is resting on. There should be little or no thump transferred to the speakers. This track will help you experiment with turntable isolation methods and products to be able to get the most out of your playback system. You may want to use a closed or sealed headphone for best listening results, or a stethoscope on the plinth.


    This title is not eligible for discount.

    Analogue Productions
    $39.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • Crosley CR6026A Coupe Turntable (On Sale) 5 COLORS AVAILABLE Crosley CR6026A Coupe Turntable (On Sale) On Sale Quick View

    $89.99$69.99Save $20.00 (22%)

    Buy Now
    x

    Crosley CR6026A Coupe Turntable (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Round the corner with style in the 3-speed Crosley Coupe! Designed to be easy to use, simply turn up the volume with one knob and adjust the pitch with the other. Connect to Bluetooth with a push of a button, or use the auxiliary port to play your digital music. Enjoy your music solo with the headphone jack or listen with friends through the built-in speaker. Pick your favorite color, and get your vinyl adventure on the road!


    Crosley
    $89.99 $69.99 Save $20.00 (22%)
    CR6026A Coupe Turntable - 5 Colors Available
    Buy Now
  • Anti-Skate Device - JMW-12 Anti-Skate Device - JMW-12 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-12



    For use with JMW-12


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.




    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-12 Buy Now
  • Trackability Test Record Trackability Test Record Quick View

    $80.00
    Buy Now
    x

    Trackability Test Record

    Useful for the following tests: left-right assignment, anti-skating adjustment, concentric groove for eccentricity check, azimuth adjustment and wow and flutter test.


    The Clearaudio Trackability Test Record provides information on the sampling characteristics of your tonearm / cartridge combination. The higher the value achieved, the better the particular tonearm / cartridge combination is able to scan hard groove modulation distortion.

    1. Left 1kHz 0dB
    2. Right 1kHz 0dB
    3. Mono lateral 1kHz 0dB
    4. 50µ tracking ability test: 333 Hz mono lateral
    5. 60µ
    6. 70µ
    7. 80µ
    8. 90µ
    9. 100µ
    10. 50µ tracking ability test: 333 Hz mono lateral
    11. 60µ
    12. 70µ
    13. 80µ
    14. 90µ
    15. 100µ
    16. No signal, endless duration
    17. 3150 Hz mono lateral
    Clearaudio Accessories
    $80.00
    180 Gram Audiophile Virgin Vinyl LP Buy Now
  • Thorens TD 203 Turntable - Gloss Black (Open Box) Thorens TD 203 Turntable - Gloss Black (Open Box) Quick View

    $935.00
    Buy Now
    x

    Thorens TD 203 Turntable - Gloss Black (Open Box)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    The TD 203 is a high quality out of the box solution from THORENS®. The turntable comes fully assembled and is factory-set. It takes no more than five minutes from opening the box to playing music from a vinyl record. The TD 203 leaves aficionados room to fine-tune and adjust the performance to their personal preferences. The tonearm, for example, offers facilities to adjust azimuth and overhang. The pick-up cartridge can be easily changed in a matter of minutes. The scope of delivery includes a specially designed transparent Perspex dust cover.


    The new Tonarm TP 82 is a uni-pivot design - a first in this class. The TP 82's bearing is a carbide tip resting within an intricate arrangement of five very small bearing balls. The arm tube is made from rolled aluminium. The anti-skating bias is provided by a small weight. The tonearm comes pre-installed with an Ortofon 2M Blue cartridge.


    Demo Discounts
    $935.00
    Thorens TD 203 Turntable (Open Box) Buy Now
  • Thorens TD 203 Turntable 3 COLORS AVAILABLE Thorens TD 203 Turntable Quick View

    $1,099.00
    Buy Now
    x

    Thorens TD 203 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The TD 203 is a high quality out of the box solution from THORENS®. The turntable comes fully assembled and is factory-set. It takes no more than five minutes from opening the box to playing music from a vinyl record. The TD 203 leaves aficionados room to fine-tune and adjust the performance to their personal preferences. The tonearm, for example, offers facilities to adjust azimuth and overhang. The pick-up cartridge can be easily changed in a matter of minutes. The scope of delivery includes a specially designed transparent Perspex dust cover.


    The new Tonarm TP 82 is a uni-pivot design - a first in this class. The TP 82's bearing is a carbide tip resting within an intricate arrangement of five very small bearing balls. The arm tube is made from rolled aluminium. The anti-skating bias is provided by a small weight. The tonearm comes pre-installed with an Ortofon 2M Blue cartridge.


    Thorens Turntables
    $1,099.00
    TD 203 Turntable - 3 Colors Available
    Buy Now
  • Anti-Skate Device - JMW-9 Anti-Skate Device - JMW-9 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-9



    For use with JMW-9


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.



    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-9 Buy Now
  • Anti-Skate Device - JMW-10 Anti-Skate Device - JMW-10 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-10



    For use with JMW-10


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.



    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-10 Buy Now
  • Pro-Ject Phono Box S 2 COLORS AVAILABLE Pro-Ject Phono Box S Quick View

    $199.00
    Buy Now
    x

    Pro-Ject Phono Box S


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Value-Based Audiophile MM/MC Phono Stage With Adjustable Cartridge Loading


    The Pro-Ject Phono Box S is an audiophile grade phono stage featuring dual-mono circuit topology, high-grade component parts and precise RIAA equalization. Four adjustable gain levels, input impedance and capacitance settings are available to best match your phono cartridge for performance optimization. A switchable subsonic filter eliminates rumble below 20 Hz. High-quality parts and adjustment flexibility give the Phono Box S true class-leading performance. An outboard power supply is included.


    Pro-Ject
    $199.00
    Phono Box S - 2 Colors Available
    Buy Now
  • VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic) VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic) Quick View

    $259.99
    Buy Now
    x

    VPI Tru-Lift Tonearm Lifter (For Player, Scout, & Classic)

    VPI


    Tru-Lift Automatic Tonearm Lifter for VPI Player, Scout, & Classic


    Stainless steal


    Adjustable height - 1 1/4 to 2 3/4


    Includes 3 interchangeable sleeves for more flexibility in height.

    VPI Accessories
    $259.99
    Automatic Tonearm Lifter Buy Now
  • Rega Stainless 3-Point Spacer Rega Stainless 3-Point Spacer Quick View

    $39.00
    Buy Now
    x

    Rega Stainless 3-Point Spacer

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    2 mm spacer fits RB100/101/110/202/220/251/301/ 303/330/700/808/900/1000/2000


    Allows for VTA adjustment when using nonfactory cartridges

    Rega
    $39.00
    Rega Stainless Steel Spacer - 2 mm Buy Now
  • Crosley K200 Stereo Turntable System (On Sale) Crosley K200 Stereo Turntable System (On Sale) On Sale Quick View

    $469.99$419.99Save $50.00 (11%)

    Buy Now
    x

    Crosley K200 Stereo Turntable System (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The K200 turntable stereo system is a contemporary choice. This direct driven turntable includes 30 watt power amp speakers with Bluetooth connectivity. The smooth s-shaped curve of the tonearm ensures getting in the groove with ease and plays two-speeds. The adjustable counterweight and adjustable pitch control, offer you command over the K200.



    Crosley
    $469.99 $419.99 Save $50.00 (11%)
    K200 Stereo Turntable System Buy Now
  • iFi Audio Ear Buddy iFi Audio Ear Buddy Quick View

    $20.00
    Buy Now
    x

    iFi Audio Ear Buddy


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Do your headphones suffer from hiss and pops or an irritating loud blast?


    You need Ear Buddy®- the hiss busting sidekick and model companion from iFi.


    Perfect for:


    • In-flight systems
    • Smartphones
    • Computers
    • A/V systems
    • High-end audio systems

    How to use: Ear Buddy® fits between your Smartphone/Digital Audio Player and your headphones. Just plug in and play.


    The Ear Buddy® gets rid of annoying hisses and buzzes and allows you to turn up your digital volume to a higher level to improve resolution and quality without making you deaf!


    With your Smartphone or DAP, normally you probably listen to music with the digital volume control set at 60%. This means you have lost 2Bits of resolution. Basically, it's like watching HD TV with some of the pixels from the screen missing. It's okay - but you are not getting what you paid for.


    You can turn it up to full volume but your ears (or the people around you) would not thank you for it. Adding the Ear Buddy® 'attenuates' or adjusts the volume and safely allows you to crank up the digital volume on your smartphone or DAP without painful consequences! This equals more music information being conveyed and gives you back those 2Bits and the full High Res music experience!


    Hiss is very annoying when listening with headphones. This is caused by the mismatch between too much power from the smartphone/DAP when used with headphones which are high sensitivity.


    The solution by IFI is to 'attenuate' or adjust the signal that cuts out the hiss and puts the enjoyment back into listening.


    iFi Audio
    $20.00
    Headphone Accessory Buy Now
Go to top