Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - LP10
Home > Products for: '

Amplifier

'
Results per page:
  • Manley Stingray II Stereo Integrated Amplifier Manley Stingray II Stereo Integrated Amplifier Quick View

    $5,900.00
    Buy Now
    x

    Manley Stingray II Stereo Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    The famous Manley Stingray stereo integrated amplifier has been renewed and refreshed. Allow us to present to you the Stingray II integrated tube amplifier with full featured RF and IR remote control. We also make another model with a built-in iPod dock called the Stingray iTube that you can learn about here.


    The STINGRAY II is the next evolution from our acclaimed Stingray Integrated Amplifier, legendary in the hifi world since it first swam from our labs in 1997. Originally conceived with particular attention paid to optimal component placement for the purity and symmetry of the signal path layout, the Stingray quickly became one of our best-selling products. The Stingray II retains the same basic tube circuitry and marvelous output transformers as the original with some important improvements:


    The high voltage tube energy storage has been increased vastly resulting in even more solid and coherent bass control and impact.


    A headphone jack has been added to the right side facia. This jack re-routes the output from the speaker binding posts and mutes the Subwoofer output feed. This makes the Stingray II a fabulous headphone amplifier!


    The 4th input source is an 1/8 (3.5mm) TRS mini jack for convenient hookup with portable devices and computers on the left front facia.


    The Remote Control works with both Radio Frequency and InfraRed technologies. Using the remote in RF mode gives freedom from having to point and shoot. The RF remote is omnidirectional and works through walls and cabinets. IR capability is included for those with Universal Learning Remote Controls for consolidated integration into existing systems. The volume control, balance adjust, input switching, and display options are all on the RF/IR Remote Control. Additionally user can perform the MUTE, DIM, INSERT and STANDBY commands with the Remote Control.


    Each INPUT can be individually level trimmed to match and to optimize system gain staging of various input devices.


    The fancy blue LED displays surrounding the INPUT and VOLUME encoder knobs can be dimmed down or turned off entirely, after a user-settable time period, or a screen-saver random light sequence can be selected. Speed and intensity of the Starlight mode can be tweaked to taste.


    All custom user settings are hard written into memory when the unit is put into STANDBY mode and thus retained if power is later interrupted.


    There is even a SLEEP timer which is programmable from the remote control to allow you to drift off carefree dreaming of your musical Stingray for 15, 30, 45 or 60 minutes while it gracefully lowers the volume and puts itself into STANDBY mode.


    Individual sealed gold contact relays deliver the selected input into the volume control system before hitting the first 12AT7 input tubes. Following the mighty 6414 driver/phase splitter, the trusty EL84 output stage can be switched between either 20 watts of TRIODE power or 40 watts of Ultra Linear mode push-pull operation. Individual bias for each tube is easily adjusted using the trimpots and test points, conveniently located on the top surface of the amplifier. The Stingray's power supply is extra-rugged and stiff, a MANLEY hallmark. It swims with the sharks: fast, agile, fluid, and with consummate authority.


    Post-volume SUBWOOFER OUTPUT allows easy hookup of outboard line-level driven active powered subwoofers. This output is after the volume control so that the subwoofer will track the volume level changes of the main speakers. The SUB OUTPUT is a line level and full frequency output that is AFTER the volume control so your powered subwoofer follows the same volume as your main speakers. These are unbalanced RCA jacks, line level. They feed the line inputs of your subwoofer, NOT the speaker jacks.


    A switchable TAPE LOOP is standard. The TAPE SEND is the output of the selected input before the volume control. The TAPE RETURN can also be used as a 5th line input if needed.


    RECORD OUT (aka Tape OUT) is BEFORE the volume control so you can record whatever input you have selected without your listening level affecting the level going to your recorder. These are unbalanced RCA's. It is UNbalanced RCA's and UNbuffered so check out the input Z to your recorder to make sure it won't load down the Stingray main input while it is plugged in. Usually with unbuffered record outs we recommend you only plug in your recorder only when you are actually recording...


    Tape LOOP: Also known as an INSERT point, the SEND or Tape Out comes off the selector switch as the Record Out option does going to your outboard EQ or Merlin BAM unit or tape recorder and then the signal returns (RETURN) to the Stingray in front of of the volume control so you can play tunes. A toggle switch selects whether the Tape LOOP (and whatever is plugged into the Tape Loop) is active or the signal goes straight through the Stingray as normal. If you have the Merlin BAM system, order your Stingray with the Tape LOOP option.


    Need more than four inputs? Get a SKIPJACK line switcher and run it into this LOOP RETURN: The SKIPJACK is perfect for adding more inputs to anything. So if you use a SKIPJACK's 4 stereo inputs plus the Stingray II's 4 stereo inputs (3 RCAs + iPod output) you'll get 8 stereo inputs total. The way to do that is to consider the TAPE LOOP: you can bring the SKIPJACK output into the LOOP RETURN, enact the LOOP ACTIVE switch and use the 4 x SKIPJACK inputs feeding the LOOP RETURN with the SKIPJACK controlling source switching for those 4 inputs. Then if you put the Stingray's LOOP switch to BYPASS you will be working with the 4 x Stingray inputs selectable on the Stingray. That gives you 8 total stereo inputs (7 stereo LINE inputs plus the 1/8 input jack).


    Or if you do not want to use the TAPE LOOP feature (because you are using it for other purposes) you can use a SKIPJACK to get up to 7 stereo line inputs (6 stereo LINE inputs plus the 1/8 Line Input jack) by running the SKIPJACK's output into one of the Stingray's inputs.


    NOTE: The SUBWOOFER OUT, RECORD OUT, and TAPE LOOP are all passive. The RECORD OUT comes straight off the input select switch. So whatever source is selected will show up passed through at the TAPE OUT. With the Stingray, the MANLEY team has struck a remarkably harmonious balance in design which satisfies the sonic desires of the audiophile and the rocker, the artist and the musician, the student and the master, the yin and the yang.


    Manley Labs
    $5,900.00
    Manley Stingray II Stereo Integrated Amplifier Buy Now
  • Tube Phono Amplifier By Bellari VP130 Tube Phono Amplifier By Bellari VP130 Quick View

    $275.00
    Buy Now
    x

    Tube Phono Amplifier By Bellari VP130


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    It was quiet, and golden-sweet and liquid in the midrange, as you'd expect from a 12AX7-based phono preamp.

    - Michael Fremer, Stereophile


    The vp130 is a tube phono preamp with a built in headphone amplifier for use with moving magnet and high output moving coil cartridges. The vp130 is designed to amplify an RIAA equalized phono signal to a hi level signal. Since the unit utilizes tube circuitry the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.


    Music Hall
    $275.00
    Bellari VP 130 Phono Amp Buy Now
  • Marantz PM7005 Integrated Amplifier (With USB-DAC) Marantz PM7005 Integrated Amplifier (With USB-DAC) Quick View

    $999.00
    Buy Now
    x

    Marantz PM7005 Integrated Amplifier (With USB-DAC)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With USB-DAC


    The PM7005 is a fully discrete, current feedback integrated amplifier with USB-DAC functionality. It is simply perfect for audiophiles wanting both excellent music quality and a maximum of flexible operation, which is provided by the highly versatile DAC-mode.


    Marantz
    $999.00
    Marantz PM7005 Integrated Amp Buy Now
  • Decco65 Integrated Amplifier (High Gloss Black) Decco65 Integrated Amplifier (High Gloss Black) Quick View

    $899.00
    Buy Now
    x

    Decco65 Integrated Amplifier (High Gloss Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Simplicity = Performance

    The only thing left to add to the decco65 is your computer or streamer and speakers. Simple and elegant for the way you listen. The decco65 has the inputs you really need for sources you use. Few are "analog" today, yet most integrated amplifiers on the market support analog only. The decco65 was designed to enhance any digital source, from mp3 to full 24/192 on your computer to the Apple TV, Sonos, music servers, internet radio or whatever source you choose.


    The Reasons It Sounds So Good


    • The ESS Sabre Digital to Analog Converter is widely recognized as the world's best DAC when dealing with hostile digital components like computers and streamers.

    • The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio.

    • The Amplifier uses the same technology found in very expensive premium amplifiers.

    • The Headphone Amp switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high resolution music.



    Digital to Analog Converter

    The ESS Sabre Digital to Analog Converter is widely recognized as the worlds best DAC when dealing with hostile digital components like computers and streamers. Jitter is all but eliminated leaving a beautiful digital canvas as a base. The art of this DAC comes in with the hundreds of additional parts and multiple power supplies designed around the ESS chip that work in unison to produce the Peachtree sonic signature.


    Real-world Performance

    The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC. Asynchronous communication allows a high precision clock inside the decco65 to control the timing of the bitstream from the computer to the DAC. USB implementation is one of the more difficult tasks in the real world of computer audio.


    Galvanic Isolation

    Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs. Any contamination due to the switching power supply, multiple ground points, and high speed processing is isolated from the DAC so nothing but pure 1s and 0s reach the DAC circuit.
    The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio. It can be switched on or off from the remote control to match your preference at any given time. We find it especially good for Pandora, MOG, Spotify and most cloud-based listening.


    Beautifully Amplified

    The Amplifier section of the decco65 uses the same technology found in very expensive premium amplifiers. This high performance Class D design has the ability to drive 65 watts per channel into 8 and 95 watts per channel into 4 with a very natural sound. The decco65 has the sonic signature of a great A/B amp with the power efficiency of Class D. Its combination of low distortion, high bandwidth, and energy efficiency makes it the ideal partner to the decco65 digital front end and hybrid tube preamp.


    Just You and Your Music

    The Headphone Amp in the decco65 switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high-resolution music. The headphone output runs through the tube stage so you can enjoy that smooth tube sound in solitude.


    Peachtree Audio
    $899.00
    Decco65 Integrated Amplifier Buy Now
  • Rega Elex-R Amplifier Rega Elex-R Amplifier Quick View

    $1,695.00
    Buy Now
    x

    Rega Elex-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Elex-R is a sublime blend of the Brio-R design with the power circuits and advanced phono stage of the Elicit-R. Rega's engineers have achieved the perfect balance of power, control and dynamics, delivering a performance that always puts the music first.


    You will find plenty of connectivity options allowing complete flexibility and integration within the rest of the Rega range.


    Design Innovation


    The Elex-R is built to the highest standard and designed to deliver the best possible audio performance whilst remaining simple to use and easy to setup.The Elex-R is built into the full width Rega case with increased heat dissipation, which along with a larger transformer enables the Elex-R to deliver 90 Watts per channel into 6 and 72.5 Watts per channel into a design centre rating of 8.


    Our time, effort & money have been spent on developing the circuit and construction utilizing the highest specification of components throughout. As part of the design we have included useful features like pre-amplifier output, to enable the new Elex-R amplifier to be used in a wide combination of systems and have avoided superfluous gadgets such as tone controls or a headphone socket as they can obstruct the signal path and degrade the produced sound quality.


    The Elex-R has been built to Rega's extremely high standards of reliability and quality to ensure many years of musical enjoyment. The primary function of an amplifier is to boost and equalize the low level signal generated by a phono cartridge, DAC and CD player or other source component to a level that can drive the loudspeakers. It is vital that the amplifier achieves this whilst minimising distortion, as this would directly affect the music. The distortion level is typically 0.007%; just under the clipping of the output.


    The volume control and pre-amplifier used in the Elex-R is designed to overcome the problems associated with the standard arrangement. This design uses a custom chip along with peripheral support IC's like a microcontroller and a custom made rotary volume control.


    The Elex-R uses a combined feedback and passive volume control, where the feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum.As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only 'use' the required gain to amplify the signal.This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required.


    Power Amplifier Technology


    The output amplifier used in the Elex-R, Elicit-R and Brio-R was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around a complementary pair of 150w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current) this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability with lower standing.


    Rega Integrated Amps
    $1,695.00
    Rega Elex-R Amplifier Buy Now
  • Rega Brio Integrated Amplifier Rega Brio Integrated Amplifier Quick View

    $995.00
    Buy Now
    x

    Rega Brio Integrated Amplifier




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Brio has a completely new case to house its improved circuits and parts. It now sits in a fully aluminium two-part case which boosts the Brio's heat sinking capabilities and improves on Rega's already solid build quality and reliability. The new Brio has a cleverly integrated headphone socket specially designed to avoid interference with the audio circuit when not in use and as you would expect, a very high specification moving magnet phono stage is built in as standard.


    Throughout the design process the Brio has been meticulously improved in every aspect, from the quality of materials to the manufacturing process, to make this new Brio a step ahead in Rega's engineering and design for amplifiers.


    Brand new case design.

    The sleek and minimal look was designed to bring elegance to Rega's classic style but still harks back to the swooped features hidden away in Rega's past amplifiers. Combining all these aspects makes this Brio case a unique standpoint amongst the competition.


    Re-designed circuit.

    Key improvements have been made to the circuits. The PCB layout has been fully upgraded to handle higher specifications for all critical parts. A second raw power supply has been added to provide further isolation between output stage and the driver stage/line and phono amplifiers. This improves the isolation between high and low level signal stages of the amplifier. Higher specification MUSES operational amplifiers have been used in the line and phono amplifier.


    Headphone Socket.

    For convenience, the Brio has the capability to drive standard hi-fi headphones from the internal amplifier. Adding a headphone socket was only possible by finding a way to reduce its impact on the main signal path so it doesn't disrupt the overall sound quality. We have paid special attention to the switch that deactivates the main speakers.


    Rega
    $995.00
    Brio Integrated Amplifier Buy Now
  • Pro-Ject Phono Box E - White Pro-Ject Phono Box E - White Quick View

    $59.00
    Buy Now
    x

    Pro-Ject Phono Box E - White


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    For MM Cartridges


    Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry-level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.


    Pro-Ject
    $59.00
    Phono Box E Buy Now
  • Rega Fono mm Phono Stage Pre-Amplifier (Black) Rega Fono mm Phono Stage Pre-Amplifier (Black) Quick View

    $399.99
    Buy Now
    x

    Rega Fono mm Phono Stage Pre-Amplifier (Black)

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Rega Fono is a high quality discrete component phono mm preamplifier.


    Works with all Rega mm cartridges as well as with many other manufacturers cartridges.


    Like the Ear, the new Fono benefits from an all new extruded aluminium case and new styling giving it more of a family feel, to match its illustrious big brothers.


    The Fono simply connects to the line input on the amplifier, and the tonearm leads and earth (if used) to the input socket and earth terminal of the Fono back panel.


    Rega
    $399.99
    Phono Pre Amplifier Buy Now
  • Marantz MM7025 Amplifier Marantz MM7025 Amplifier Quick View

    $799.00
    Buy Now
    x

    Marantz MM7025 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    First Impressions

    If you're impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting - and very positive - impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any dÉcor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace" view of the amplifier's operating status.


    Getting Connected

    Both single-ended RCA and balanced XLR inputs assure system compatibility regardless of your preamplifier or processor. For maximum flexibility, you can choose inputs independently for each channel.


    The MM7025's heavy duty, gold-plated, four-way binding posts accept virtually any choice of loudspeaker cable


    Your System, Your Way

    The MM7025 encourages various system configurations. Use one for dedicated two-channel listening, or use two to as zone amplifiers to power speakers in different rooms. Adding a new pair of loudspeakers to an existing home theater? - Get the most from your investment by adding an MM7025 as well. The exact configuration is up to you. Sound quality isn't - it's Marantz regardless of how you use this power amplifier.


    Marantz Sound Quality

    The MM7025's advanced technology serves all your listening needs. Current feedback circuits, also used in Marantz's Reference Series amps, insure the purest sonic reproduction regardless of source. Another MM7025 virtue, and one directly traceable to its substantial current capability, is the control it establishes over difficult speakers to reproduce both dynamic musical peaks and whispered dialog without blemish.


    The Power Supply

    As befits a Marantz amplifier, the high-capacity power supply begins with an oversized EI-core transformer feeding carefully chosen capacitors capable of storing 30,000 µF of energy. This combination instantaneously delivers peak power to all amplifier stages for distortion-free reproduction of the most complex sources.


    Output Devices

    In the final amplification stage, specially selected LAPT Hyper-Power output transistors, originally selected for Reference Series use, deliver fortissimo and pianissimo passages with equal aplomb. To make sure they're always operating at ideal temperatures, these transistors are mounted on a forced-air "thermal tunnel."


    Where Do I Put It?

    The MM7025 is less than 14" deep from front panel to rear speaker terminals. This lets you place the amplifier almost anywhere - in a cabinet or on a shelf. A detachable AC cord makes placement easy, even when there's little room and you can even rack mount it with the optional rack mount kit RMK8754MSP.


    Remote Control, Too

    You'll find rear panel connections for a "flasher" input that conveys On/Off commands from an infrared (IR) remote controller. There's a DC trigger input (and output) that lets you "daisy chain" one or several MM7025s to turn on and off in synchronization with your preamplifer or surround processor. If you're going to use the MM7025 with legacy Marantz products, there are RC-5 connectors to give you a level of operating convenience you might not have thought possible.


    Conclusion

    Refined looks. Flexible connectivity. Superb sound quality. Convenient operation. Yes, these Marantz attributes come together in the MM7025 Stereo Power Amplifier.


    It is, as are all Marantz products, devoted to one goal - satisfying your desire for an exceptional listening experience.


    Marantz
    $799.00
    Power Amplifier Buy Now
  • Manley Snapper Amplifier (Open Box) Manley Snapper Amplifier (Open Box) Quick View

    $5,299.00
    Buy Now
    x

    Manley Snapper Amplifier (Open Box)

    2005


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    Handcrafted in the USA


    In 2002 we launched a very tasty all-tube 100 watt monoblock called The Snapper® (oceanic names continuing). At $7,250 per pair for stereo playback, we also welcome you to catch a school of Snappers for surround systems.


    Another brilliant design from Mitch Margolis features a quartet of EL34 or 6CA7's in a fully differential circuit topology, including the input and driver stages. This Snapper can be driven fully balanced all the way through via the XLR inputs. If you have balanced outputs on your preamplifier, this amplifier is the first Manley design to really let you take advantage of your XLR's without additional balancing input circuitry or input transformers. Very cleverly, the unbalanced RCA's can alternatively be used in this special topology with equally impressive results.


    Biasing is easy with all measurement points and trimpots located on the top deck and speaker connection is made with heavy duty WBT binding posts.


    Over three months of prototyping in the Manley Magnetics department resulted in a brand new output transformer design, a true 19-section incredibly complicated piece. The Snapper will crank out 100 watts at 10 cycles all day long and a full 110 watts from about 15Hz all the way up to 40KHz. Don't let frequency response specs fool you when people give you amazing bandwidth measured at... oh, five puny watts. We're talking full power bandwidth here! Continuous duty. Real muscle.


    Demo Discounts
    $5,299.00
    Manley Snapper Amplifier (Open Box) Buy Now
  • Manley Stingray iTube Stereo Integrated Amplifier Manley Stingray iTube Stereo Integrated Amplifier Quick View

    $6,300.00
    Buy Now
    x

    Manley Stingray iTube Stereo Integrated Amplifier

    Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    The famous Manley Stingray stereo integrated amplifier has been renewed and refreshed. New for 2009 we present to you the Stingray iTube integrated tube amplifier with iPod dock and full featured RF and IR remote control.


    The STINGRAY iTube is the next evolution from our acclaimed Stingray Integrated Amplifier, legendary in the hifi world since it swam from our labs in 1997. Originally conceived with particular attention paid to optimal component placement for the purity and symmetry of the signal path layout, the Stingray quickly became one of our best-selling products. The Stingray iTube retains the same basic tube circuitry and marvelous output transformers as the original with some important improvements:


    An iPod dock has been integrated into the Stingray iTube as the 4th input source. The Manley iTube has been certified by Apple and officially sanctioned as a Made for iPod product. The Stingray's Remote Control commands the iPod PLAY/PAUSE and TRACK FORWARD/BACK controls.


    The iPod's video output is available at the S-Video output jack located on the left side facia.


    The high voltage tube energy storage has been increased vastly resulting in even more solid and coherent bass control and impact.


    A headphone jack has been added to the right side facia. This jack re-routes the output from the speaker binding posts and mutes the Subwoofer output feed.


    The Remote Control works with both Radio Frequency and InfraRed technologies. Using the remote in RF mode gives freedom from having to point and shoot. The RF remote is omnidirectional and works through walls and cabinets. IR capability is included for those with Universal Learning Remote Controls for consolidated integration into existing systems. The volume control, balance adjust, input switching, and iPod interface commands are all on the RF/IR Remote Control. Additionally user can perform the MUTE, DIM, INSERT and STANDBY commands with the Remote Control.


    Each INPUT can be individually level trimmed to match and to optimize system gain staging of various input devices.


    The fancy blue LED displays surrounding the INPUT and VOLUME encoder knobs can be dimmed down or turned off entirely, after a user-settable time period, or a screen-saver random light sequence can be selected. Speed and intensity of the Starlight mode can be tweaked to taste.


    All custom user settings are hard written into memory when the unit is put into STANDBY mode and thus retained if power is later interrupted.


    Individual sealed gold contact relays deliver the selected input into the volume control system before hitting the first 12AT7 input tubes. Following the mighty 6414 driver/phase splitter, the trusty EL84 output stage can be switched between either 20 watts of TRIODE power or 40 watts of Ultra Linear mode push-pull operation. Individual bias for each tube is easily adjusted using the trimpots and test points, conveniently located on the top surface of the amplifier. The Stingray's power supply is extra-rugged and stiff, a MANLEY hallmark. It swims with the sharks: fast, agile, fluid, and with consummate authority.


    Post-volume SUBWOOFER OUTPUT allows easy hookup of outboard line-level driven active powered subwoofers. This output is after the volume control so that the subwoofer will track the volume level changes of the main speakers. The SUB OUTPUT is a line level and full frequency output that is AFTER the volume control so your powered subwoofer follows the same volume as your main speakers. These are unbalanced RCA jacks, line level. They feed the line inputs of your subwoofer, NOT the speaker jacks. A switchable TAPE LOOP is standard. The TAPE SEND is the output of the selected input before the volume control. The TAPE RETURN can also be used as a 5th line input if needed.


    RECORD OUT (aka Tape OUT) is BEFORE the volume control so you can record whatever input you have selected without your listening level affecting the level going to your recorder. These are unbalanced RCA's. It is UNbalanced RCA's and UNbuffered so check out the input Z to your recorder to make sure it won't load down the Stingray main input while it is plugged in. Usually with unbuffered record outs we recommend you only plug in your recorder only when you are actually recording...


    Tape LOOP: Also known as an INSERT point, the SEND or Tape Out comes off the selector switch as the Record Out option does going to your outboard EQ or Merlin BAM unit or tape recorder and then the signal returns (RETURN) to the Stingray in front of of the volume control so you can play tunes. A toggle switch selects whether the Tape LOOP (and whatever is plugged into the Tape Loop) is active or the signal goes straight through the Stingray as normal. If you have the Merlin BAM system, order your Stingray with the Tape LOOP option.


    Need more than four inputs? Get a SKIPJACK line switcher and run it into this LOOP RETURN: The SKIPJACK is perfect for adding more inputs to anything. So if you use a SKIPJACK's 4 stereo inputs plus the Stingray's 4 stereo inputs you'll get 8 stereo inputs total. The way to do that is to consider the TAPE LOOP: you can bring the SKIPJACK output into the LOOP RETURN, enact the LOOP ACTIVE switch and use the 4 x SKIPJACK inputs feeding the LOOP RETURN with the SKIPJACK controlling source switching for those 4 inputs. Then if you put the Stingray's LOOP switch to BYPASS you will be working with the 4 x Stingray inputs selectable on the Stingray. That gives you 8 total stereo inputs.


    Or if you do not want to use the TAPE LOOP feature (because you are using it for other purposes) or if you have an older Stingray without the TAPE LOOP, you can use a SKIPJACK to get up to 7 stereo line inputs by running the SKIPJACK's output into one of the Stingray's inputs.


    NOTE: The SUBWOOFER OUT, RECORD OUT, and TAPE LOOP are all passive. So are the BALANCE and VOLUME controls also passive. No active electronics or buffers are used in these circuits. The RECORD OUT comes straight off the input select switch. So whatever source is selected will show up passed through at the TAPE OUT.


    iPod Compatibility:


    iPod can play songs with the these sample rates, and with all compatible codecs



    • 8 kHz

    • 11.025 kHz

    • 16 kHz

    • 22.050 kHz

    • 32 kHz

    • 44.1 kHz


    Most iPods (except the iPod Shuffle) will play WAV and AIFF files. The iPod will play up to 16 bit/48kHz files.



    iTunes Compatibility:

    iTunes is not compatible with FLAC format files without a third party plugin.


    iTunes does support 24/96 wav files. iPod won't play them, but iTunes does support them.


    iTunes can in fact output 24/96 digitally, so in theory you could actually assemble a hi-rez music server based on iTunes, and use it to drive the DAC of your choice. Thus using your iPod docked on your Stingray iTube you can play WAV files which will yield similar audio quality to CD.


    With the Stingray, the MANLEY team has struck a remarkably harmonious balance in design which satisfies the sonic desires of the audiophile and the rocker, the artist and the musician, the student and the master, the yin and the yang.


    Manley Labs
    $6,300.00
    Manley Stingray iTube Stereo Integrated Amplifier Buy Now
  • Integrated Amplifier A15.3 Integrated Amplifier A15.3 Quick View

    $549.99
    Buy Now
    x

    Integrated Amplifier A15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a15.3 presents a smart alternative to surround sound receivers and all in one systems. It's the perfect choice for someone looking to assemble their first hi end audio system. Partner it with the matching c-dac15.3 dac cd player and one of our turntables for a great sounding system. Connecting a turntable couldn't be easier with the built-in moving magnet phono preamp. The amp delivers an impressive 50 watts/channel, which is plenty of power to drive the majority of loudspeakers on the market.


    Music Hall
    $549.99
    Music Hall A15.3 Integrated Amp Buy Now
  • AmpsandSound Stereo 15 SE Amplifier AmpsandSound Stereo 15 SE Amplifier Quick View

    $2,800.00
    Buy Now
    x

    AmpsandSound Stereo 15 SE Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    The Stereo 15 Special Edition is an EL84 ultra linear amp with 15watts of tube bliss. 2 EL84 tubes in push-pull configuration with ½ of a 12AX7 and ½ of a 12BH7 per channel, just like our original Stereo 15. The Stereo 15 Special Edition is based on the famous Halfer circuit with cathode bias allowing trouble free operation. 8ohm and 4ohm taps with 8ohm and 16ohm combination as an option. The circuit used is widely famed for its stability and liquid midrange.


    The Stereo 15 Special Edition produces perfectly stable 15watts RMS with 42watt peaks. The output transformers utilize massive cores which resist saturation and deliver jaw dropping low end performance. Like all ampsandsound amplifiers, it is dead quiet with reliable performance. When we say dead we mean put your ear to the mouth of your horn-loaded system and all you will hear is silence!


    Never leaving well enough alone, the Special Edition is for those who demand the very last degree of performance. Where the Stereo 15 Special Edition differs is in the use of custom wound transformers made exclusively for ampsandsound. The power transformer is nearly twice as heavy as the unit used in the Stereo 15 and allows for greater current delivery/reserves and the use of a tube rectifier. We have specified the use of a GZ34, and can accommodate GZ37s; 5U4s allows NOS rectifiers. Tube set included.


    AmpsandSound
    $2,800.00
    Stereo Amplifier Buy Now
  • Manley Neo-Classic SE / PP 300B Amplifier Manley Neo-Classic SE / PP 300B Amplifier Quick View

    $9,700.00
    Buy Now
    x

    Manley Neo-Classic SE / PP 300B Amplifier

    Enjoy


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    The wonderfully simple 300B directly heated triode is virtually Lee De Forest's very first evolutionary 3-element piece, comprising only filament, input grid and anode output. Brought to reliable perfection by Western Electric USA and later by Standard Telephones UK as the 4300B, the 300B was very much intended and widely used for telephony amplification. But audio enthusiasts of older times knew a good thing when they saw (heard!) it and the great love affair between the 300B and music began... and dwindled many years later as the American Western Electric 300B was taken out of production in the late 1980's making the genuine ones extremely valuable and, accordingly, very highly prized as collectors' pieces. With the Asian-driven passion and resultant revival of SINGLE ENDED topology the call for the 300B to be put back into production was too overwhelming for the Chinese factories to resist. The Russian and the re-start of USA manufacture of the genuine Western Electric original have further expanded the selection. Basic thermionic simplicity... directly-heated triodes... it is a drug for some, a religion for others...


    With its decidedly (and studiedly) 'retro' physical proportions- very deep front-to-back dimensions with a narrow side-to-side width, this layout closely follows concepts of a bygone era, where the well-conceived intention was to keep the power supply as far as possible from the hum and noise susceptible octal input tubes. The output tubes themselves require careful distancing from the mains transformer and, of course, require pure DC on their filaments. Again, reverence to past times begs the use of vacuum tube rectification with its very gentle voltage rise-time. But to bring the performance up to modern demands, we use two rectifiers to enable the use of very substantial filter / reservoir capacitors... over 1300 microfarads in the B+ rail- much improved from the 4 or 8 microfarads utilized in the 1930's.


    When several other manufacturers started selling single-ended amps with 5 to 9 watts of power, we understood subjectively and objectively the good part of the story: the superb mid range, the delicate detail, the inherent simplicity. The bad news was that there were almost no speakers efficient enough to help form a dynamically viable system. The worst news was that either these single-ended amps cost more than the condo and or they had specs that could only be read as a joke. As the triode fans increased, more efficient speakers became available and several fanatics began to dismiss push-pull as a bad thing to be avoided at all costs. We objected to such blanket generalities and stressed that the push-pull done right with truly phase-balanced transformers, quality parts throughout and well designed circuitry has proven to be a superb technique. We also enjoy single-ended topology but only when it is done right, mostly because we expect flat frequency response and low distortion out of an amplifier. We knew that we could achieve this in a properly conceived single-ended design. We chose to rise to the challenge of designing special circuitry that could be switched on the fly From 12 watts in parallel SINGLE-ENDED to 25 watts in PUSH-PULL which, we believe is unique in the industry.


    The Output transformer (hand-wound in our own factory) is of complex design employing inordinately high primary inductance to compensate for the mandatory magnetic gap required for the uni-direction current and voltage flow of the single-ended output stage. Another factor in the single ended triode saga (currently enjoying a wide spread popularity) is demand for little (or sometimes zero) negative feedback. We at Manley Labs believe in the judicious or sensible amount of feedback to refine and maximize performance. Our Neo-Classic SE/PP300B gives you the choice in precision switched 1 dB steps to go from ZERO dB's to 10 dB's of negative feedback. Even with zero negative feedback, this amp is cleaner and flatter than any single-ended amp we know of.


    One interesting aspect of negative feedback is it gives a higher damping factor. Conventional wisdom would have us think that the higher the damping factor, the better. Our experience is that the optimum damping factor is not infinity and that it depends on the speaker, the room. and the taste of the listener. In other words, the optimum is variability, and this we provide. This amp satisfies us as long time amplifier builders, amazes the critics in several well known magazines and is bound to satisfy you with the ability to fit into your system and your expectations. BUT REMEMBER PLEASE the overall facts of power ratings versus loudspeaker sensitivity and room size when electing to venture into lower power amplifiers (less than 50 watts) and especially when contemplating single-ended topology.


    Manley Labs
    $9,700.00
    Manley Neo-Classic SE/PP 300B Amplifier Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Thorens TEM 3200 Thorens TEM 3200 Quick View

    $16,500.00
    Buy Now
    x

    Thorens TEM 3200


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    These are quite possibly the best amps I've yet had the privilege to audition.

    - Srajan Ebaen, 6moons.com


    Monoblock Powe Amplifier


    Owing to a revolutionary circuit design, the TEM 3200 has set a new benchmark with respect to dynamic rendition and soundstage. Special features are the fully balanced circuitry layout and structure as well as the DC-coupling and automatic bias control. All these measures allow the use of just one high-power transistor in each signal path which is then further linearized by a specially designed valve circuitry in the input stage. Eventually, the sonic characteristics of the TEM 3200 are determined by the valve rather than the transistor.


    All parts and components in the TEM 3200 have been carefully selected with a very long lifespan in mind, and they have been acquired from the very best makers world-wide. Before assembly, each component is thoroughly tested in order to ensure a flawless operation for years to come.


    The valves employed have originally been developed and used for broadband amplifiers and military radar technology. It goes without saying that they have been selected for minimum noise, maximum linearity and highest reliability. An audiophile masterpiece of lasting value and a sure counterbalance for the short-lived digital world of today!


    Thorens Turntables
    $16,500.00
    Thorens TEM 3200 Amplifier Buy Now
  • Marantz PM6006 Integrated Amplifier Marantz PM6006 Integrated Amplifier Quick View

    $699.00
    Buy Now
    x

    Marantz PM6006 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.


    You can connect this superb integrated amplifier directly to a vast range of digital sources and use its superior 24bit/192kHz high current CS4398 DAC to create an unbelievably high level of audio enjoyment with new media. The unit now includes 2 optical and 1 coaxial digital inputs (an additional optical input from the predecessor, PM6005), and the complete digital section is fully shielded by an extra metal housing to ensure that the digital stage has no effect on the analog signal.


    All of the original features-such as five-line audio input including phono, two-pairs of gold-plated speaker connections with the convenience of bi-wiring, and a remote handset-are all still there. The lower impedance shielded Toroidal transformer, as well as customized components and unique Marantz HDAM modules care for powerful, dynamic and detailed original Marantz sound. In short, the new PM6006 is a new star with excellent genes.


    Marantz
    $699.00
    Integrated Amplifier Buy Now
  • Rega Elicit-R Amplifier Rega Elicit-R Amplifier Quick View

    $2,999.00
    Buy Now
    x

    Rega Elicit-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    What


    Introduction

    Rega is very proud to introduce a brand new high performance integrated amplifier. Designed and engineered to the highest standard to deliver the best possible audio performance whilst remaining simple to use and easy to setup.


    Our recent development work in amplifier design circuitry has allowed us to further advance the Elicit-R performance by using new and improved power amplifier circuits (based around the hugely successful Rega Brio-R amplifier). Combined with FET discrete line pre-amplifiers and a programmable stepped attenuator volume control ensuring greater levels of performance and control over the delivery of power. The Elicit-R is supplied with the new Solaris system remote handset offering full control over this and all of the current R range of electronics.


    Technology

    The output amplifier used in the Elicit-R was born after extensive research by our engineers to develop a low source Class-A* driver stage. Based around a complementary pair of Darlington output transistors forming an emulated Class-A driver stage.


    Features

    The Elicit-R includes a high quality built in moving magnet phono stage designed to maximise the potential of your vinyl system. A simple switch on the rear panel allows the same input to be switched to a secondary set at line level. This input is specially configured to offer further isolation and reduce noise. This makes it ideally suited for connection of more sensitive products such as an external MM or MC phono stage.


    If your system is not vinyl based the same socket allows this line input to be used with any line level product (such as a CD player or DAC) ensuring maximised connectivity via the back panel. These features coupled with Polypropylene capacitors throughout the signal path, improved power supplies, increased output power to 100 watts per channel all housed in a brand new custom designed case combine to give the best performance Elicit to date.


    *The design of the Elicit-R benefits greatly from running warm. To ensure best performance it is recommended to allow the unit to reach optimum temperature before critical listening.


    Rega
    $2,999.00
    Rega Elicit-R Amplifier Buy Now
  • Rogers EHF-200MK2 Amplifier Rogers EHF-200MK2 Amplifier Quick View

    $15,900.00
    Buy Now
    x

    Rogers EHF-200MK2 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Hand-built, these Class A vacuum tube amplifiers are designed to give audio enthusiasts the ultimate listening experience now equipped with KT150 Power Tubes Never before has music sounded so good coming out of your speakers. Clarity rules with the EHF-200 MKII which adds Sub woofer output and Remote Control.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $15,900.00
    Integrated Amplifier Buy Now
  • Audioengine P4 Speakers (Satin Black) Audioengine P4 Speakers (Satin Black) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Satin Black)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Satin Black) Buy Now
  • Manley Neo-Classic 500 Watt Monoblock Amplifier Manley Neo-Classic 500 Watt Monoblock Amplifier Quick View

    $15,000.00
    Buy Now
    x

    Manley Neo-Classic 500 Watt Monoblock Amplifier

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    Tried and true: The Manley 500 and 250 Watt Monoblocks are our most powerful push-pull production-models. Both the circuit design and the selected componentry have been refined over years and years of development. Reliability that you can depend upon combined with musical accuracy and emotional authority is what these amplifiers promise- and deliver. They are able to switch operation modes allowing the listener to choose between the sonically seductive qualities of triode and the more powerful Ultra-Linear configuration. We use big, beefy reservoir capacitors in the high voltage supplies giving plenty of instant energy for dynamic performance of transient peaks and bass impact and weight which often exceeds that of rival solid-state amplifiers. We run high voltages on the plates of the output tubes but operate them at lower current which will result in their longer life. Although each output tube has its own bias-adjust, We carefully fit each amplifier with computer-batched tubes for optimum performance. The bias adjustment pots and measuring points are conveniently located behind the oval front panel insert.


    To avoid a heavy power drain when the cold amplifier is first switched on, we conceived a Soft-Start mode which also functions as an Ever-Warm position allowing the amplifiers to be always warmed up for pleasurable listening. Each amplifier only consumes 30 watts of power in Ever-Warm mode. A blinking green LED reminds the user that the amplifier is in warm-up mode because as all the power supplies are at half-voltage, the amplifier will still operate at half power when the Ever-Warm mode is engaged, so the user should use the MUTE switch when in this mode.


    The front-panel mute switch and angled-back chassis make it easier to hook up the interconnects, speaker cables, and IEC power cord.


    In our own in-house magnetics department, our R&D team completely redesigned all of our output transformers in 1998 with the goal to reclaim that luscious rich mid-range of our vintage designs. In 2013 we reworked the output transformer to operate the output stage in Ultra-Linear mode which is a great sounding balance between the detail of triode and the brawn of Tetrode. We also specifically set out to achieve a deeper bottom register at higher power with lower distortion. Hours and hours of listening tests, measurements, and fine-tuning brought an exciting and stunning result to our ears. We hope you will agree.


    Manley Labs
    $15,000.00
    Manley Neo-Classic 500 Watt Monoblock Buy Now
  • Manley Headphone Amplifier (Pre-Order) 3 COLORS AVAILABLE Manley Headphone Amplifier (Pre-Order) Quick View

    $2,950.00
    Buy Now
    x

    Manley Headphone Amplifier (Pre-Order)


    Manley Laboratories have been designing and manufacturing professional and hi-fidelity audio equipment for the last twenty five years. Headphone listening has become more and more popular in recent years. To meet this new demand Manley have combined its professional and domestic engineering skills to develop a new and exciting groundbreaking product, The Manley Headphone Amplifier.


    Headphone listening is not new to us, we have developed headphone mixers for the professional industry and our Neo-Classic 300B preamplifier was designed with the serious headphone listener in-mind, which now has quite a cult following. The new Manley Headphone Amplifier addresses absolutely every possible feature the headphone user could desire.


    Feature Rich


    This feature rich product has no less than twelve independent controls designed for maximum performance and maximum control. We design and manufacture our own output transformers and this is where this product excels. The Manley Headphone Amplifier utilizes hand-wound air gapped dual mode output transformers. The user can configure the unit for all triode Push-Pull mode or Single-Ended mode. The transformer can be configured to drive three types of headphone loads, covering a range from 12 to 600 ohms.


    The enthusiast can also vary the Feedback from 0dB to 10dB, maintaining a ruler-flat frequency response across the audio band, demonstrating how stable the design is. For increased transparency and accuracy we have incorporated a Precision Stepped Relay Volume control with perfect channel balance. A balance control is also available for extra sensitivity. The Manley Headphone Amplifier operates fully symmetrical, enabling it to drive balanced headphones through its XLR output. Also available is the standard non-balanced "Jack" plug or TRS connection. Another very useful feature is a preamplifier output, which routes your first input through the system when not in use, no need for unplugging sources! The Manley Headphone amplifier can also be used as a stand-alone transformer coupled preamplifier, so it can be partnered with any power amplifier if so desired.


    With the advent of expensive and high technology headphones it was important for the Manley design team to think about protection. So the Manley Headphone Amplifier features a user defined headphone overload protection system. The user dials this in so precious headphones are never overdriven. For maximum performance and the lowest noise floor, The Manley Headphone Amplifier incorporates a very high-tech switching audiophile power supply. The high-tension and low-tension rails are all fully regulated offering super low impedance for a fast and dynamic response.


    The Manley Headphone Amplifier also incorporates a tone control circuit what? for an audiophile product!! Yes! With the expertise gleaned from building professional studio equipment, we have incorporated the best possible solution for a tone control. It is completely switchable, so for the real purist it is completely out of the circuit, but if you need that slight adjustment for a hard digital recording the feature is there.


    The Design


    The Manley Headphone Amplifier is a very unusual design. Zia Faruqi, who is responsible for running the engineering team and industrial design at Manley Laboratories, developed its concept. "I wanted a design that would reflect the use of this piece of equipment. Its shape was inspired by a head, a piece that you could rest your headphones on, a piece that you want to indulge yourself in" Mitch Margolis who worked on the Steelhead and our 300B amplifiers worked with our head engineer Humberto Rodriguez to finalize its design. Available in three different colors for today's lifestyle choices. Champagne & White, Titanium & Bronze and Copper & Black.


    Manley Labs
    $2,950.00
    Headphone Amplifier PRE-ORDER
    Buy Now
  • Rega Ear Headphone Amplifier Rega Ear Headphone Amplifier Quick View

    $395.00
    Buy Now
    x

    Rega Ear Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Ear Headphone Amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers.


    The Ear simply connects to the tape output of an amplifier via phono leads, the headphones are plugged into the front panel and there is a link socket incase you need your tape output sockets for other use.


    Rega
    $395.00
    Rega Ear Headphone Amplifier Buy Now
  • Klipsch Subwoofer Amplifier RSA-500 Klipsch Subwoofer Amplifier RSA-500 Quick View

    $849.00
    Buy Now
    x

    Klipsch Subwoofer Amplifier RSA-500



    1,000-Watt THX Ultra2 Certified Subwoofer Amplifier

    While the RSA-500 subwoofer amplifier was essentially constructed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also includes custom settings for the AW-800-SW outdoor subwoofer.


    This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also includes rack ears for fast and safe placement into any standard 19-inch rack.


    To keep end users from inadvertently tampering with performance levels the majority of the RSA-500's controls are located on its rear panel. The fuse is also included on the back for swift and seamless replacement. A detachable IEC power cord allows for the easy removal and reinstallation of the entire amplifier unit. The RSA-500 was also buily to "play nice" by offering standard input/output connectivity that will support any type of system.


    rockrollkeepers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Klipsch
    $849.00
    Subwoofer Amplifier RSA-500 Buy Now
Go to top