Pro-ject Authorized & Certified VPI Dealer

A World of Vinyl

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
15% Off Vinyl - LP15
Home > Products for: '

Cardas

'
  • 1
Results per page:
  • SCC Conductor - Cardas SRCA 2 LENGTHS AVAILABLE SCC Conductor - Cardas SRCA Quick View

    $395.00
    Buy Now
    x

    SCC Conductor - Cardas SRCA

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $395.00
    SCC Conductor - Cardas SRCA (2 Lengths Available)
    Buy Now
  • SCC Conductor - Cardas XLR 2 LENGTHS AVAILABLE SCC Conductor - Cardas XLR Quick View

    $495.00
    Buy Now
    x

    SCC Conductor - Cardas XLR

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $495.00
    SCC Conductor - Cardas XLR (2 Lengths Available)
    Buy Now
  • SCC Conductor - Vampire Locking Connector 2 LENGTHS AVAILABLE SCC Conductor - Vampire Locking Connector Quick View

    $395.00
    Buy Now
    x

    SCC Conductor - Vampire Locking Connector

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $395.00
    SCC Conductor - Vampire Locking Connector (2 Lengths Available)
    Buy Now
  • CI Audio PEQ-1 MKII MM/MC Phono Preamplifier CI Audio PEQ-1 MKII MM/MC Phono Preamplifier Quick View

    $995.00
    Buy Now
    x

    CI Audio PEQ-1 MKII MM/MC Phono Preamplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Channel Islands Audio is proud to announce the release of our long-awaited PEQ•1 MKII MM/MC Phono Preamplifier!


    Features



    • Ultra-Low noise

    • Ultra-Low harmonic & intermodulation distortion (THD/IMD)

    • Dual-Mono Design for low crosstalk

    • Heavy steel faraday cage for high resistance to electromagnetic and radio frequency interference

    • Rear panel DIP switches for convenient configuration & adjustment

    • 5 Year Warranty

    • Handcrafted in USA


    The PEQ•1 is a versatile design offering outstanding performance with a wide variety of phono cartridge types.


    This new dual-mono design is aimed at music lovers seeking the utmost life-like performance from their vinyl collection. Dynamic and detailed, yet smooth and rich, with soundstage and imaging to create realism rarely heard.


    Power


    The internal design of PEQ•1 starts with a dual AC input (one for each channel).


    When the outboard power supply is connected, the AC is fed to two independent filter/regulation circuits (1 per channel). These circuits feed the L & R audio stages with ultra-low noise on par with the best battery technologies, and without the inconvenience. There is also a Chassis Ground switch to optimize chassis shielding.


    The standard AC supply is an AC wall adapter type with a single winding feeding the L&R circuits.


    This supply is 120V input only.


    Countries with 220~240V mains must use the AC·15 MKII Upgrade Supply.


    The AC·15 MKII Upgrade Supply Features:


    • Large Toroidal Transformer with dual outputs (1 per channel)

    • AC Line Filtering

    • Dual common-mode choke filtering (1 per channel)

    • 120V/240V Selectable Input Voltage

    • Rear Panel Power Switch

    • Detachable AC Input & Output cables



    Audio Circuit


    Input signals are connected via highest quality Cardas™ panel-mounted RCA jacks. The input jacks are routed to two independent mono circuits of identical layout. This assures exact performance from both channels and reduces crosstalk.


    Circuit topology consists of an input gain stage with selectable resistive load, capacitance, gain, and subsonic filter. This gain stage is followed by a passive high frequency cut, then an active bass boost to create the RIAA equalization curve, then to the output jacks.


    Careful layout yields a very short signal path from input to output, and a combination of star grounding power supply components/ground plane for the audio circuits, result in a silent background and immunity to EMI/RFI pickup. The entire circuit board is then housed in a heavy steel faraday cage to further reject outside interference, then inside the attractive aluminum outer chassis.


    Highest quality components are used throughout:


    Cardas™ jacks, Nichicon Muse™ NP power supply capacitors, Vishay™ 2% Polypropylene signal and bypass capacitors, Takman™ metal film & carbon films resistors, and Grayhill™ switches.


    5 Year Warranty


    Enjoy peace of mind with our comprehensive 5 year warranty. Full service information is included in the product manual.


    CI Audio
    $995.00
    PEQ-1 MKII MM/MC Phono Preamplifier Buy Now
  • 1
Go to top