Pro-ject Authorized & Certified VPI Dealer

A World of Vinyl

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
15% Off Vinyl - LP15
Home > Products for: '

Headphone Amp

'
  • 1
  • 2
Results per page:
  • Creek Audio Evolution 100A 2 COLORS AVAILABLE Creek Audio Evolution 100A Quick View

    $2,195.00
    Buy Now
    x

    Creek Audio Evolution 100A





    To maintain a family resemblance with the lower powered amplifier, the EVOLUTION 100A is housed in a similar slim case with engraved front panel and solid metal control knobs as the EVOLUTION 50A. It is available with either a Black or Silver brushed aluminium front panel and uses the same ingenious soft push button design as the EVOLUTION 50 series, offering excellent tactile feel and backlit optical indication of functions, for optimum user-friendliness.


    The front panel features a large OLED (Organic Light Emitting Diode) display. The white on black display provides higher clarity and resolution than a normal display and has a wide range of customised graphic symbols. Display brightness levels can be changed or turned-off, if not required, via the menu system.


    In addition to greatly increased performance, thanks to ingenious new circuit design, the EVOLUTION 100A has been equipped with 2 sets of high quality loudspeaker binding posts, with local and remote switching for A & B outputs. Optional extras include the ability to plug the Sequel mk2 Phono pre-amp inside and add the AMBIT FM/AM radio or RUBY DAC/Bluetooth/FM radio module to the expansion slot on the rear panel.


    At the heart of any high-end amplifier there must be a good power supply; The EVOLUTION 100A uses a massive 360 Watt, low profile, toroidal mains transformer, with multiple windings for high and low voltages and current, to separate the power amp, pre-amp and digital circuitry. Creek's long-standing design policy of paralleling several small capacitors in the power supply creates an ultra-high specification capacitor, with low inductance and ultra low impedance. This significantly improves filtering and helps produce a very powerful and accurate sound from such a relatively small amplifier.


    After testing several methods of building a high performance and high efficiency power amplifier, suitable for this new model, David Gamble - Creek Audio's Senior Engineer - created a unique Class G circuit especially for the EVOLUTION 100A. David chose to use four Sanken STD03 complimentary power Darlington transistors per channel, as used in the EVOLUTION 50A, which feature built-in thermal compensation. Compared to the EVOLUTION 50A, he improved the performance of the voltage gain circuitry, which, in combination with the output stage, now achieves extremely high open-loop gain and exceptionally low distortion, without sacrificing stability. The result is an exceptional power amplifier circuit with very low output impedance and high output current capability. This combination provides exceptional speed and control suitable for driving most loudspeakers.


    To increase the power output of the smaller EVOLUTION 50A, yet still retain the same case size, David Gamble developed a cunning Class G circuit which runs normally at a lower voltage for power levels up to 25 Watts into 8 Ohms. When required to produce more than 25 Watts, the amp automatically swings to a higher secondary voltage, to increase the output power capability to over 100 Watts into 8 Ohms.


    Statistically, average audio signals are mostly below half the maximum voltage swing available, which incidentally is only one quarter of the power. As the dissipation of lossy 'idle current' in a Class A/B amp (in the form of heat) is much lower for a 25 Watt amp than the potential 100 Watts in the EVOLUTION 100A, this solution dramatically improves the amplifier's thermal efficiency and helps to keep it slim and attractive.


    The Pre-amp circuit provides high levels of flexibility and control, via unbalanced or balanced inputs. It has multiple input options, switched either electronically or by gold contact relays. It also has a State-of-the-Art electronic Volume, Balance and Tone controls. Volume control and op-amp circuit outputs are all buffered with constant current sources, to provide improved load tolerance and stable distortion characteristics.


    Correct grounding is difficult, if not impossible, in an un-balanced amplifier, so Creek has provided the consumer with a balanced line input for both the pre-amp and power amp input. In addition, the optional RUBY DAC module also benefits from having a dedicated balanced audio connection to the EVOLUTION 100A's pre-amp, via its flat foil cable, to avoid potential ground loops inside the amplifier.


    It is a modern listening trend for headphones to now be fed from low voltage sources, such as smart-phones and portable music storage devices. This required the development of low impedance headphones, to draw the required current to make them loud enough to satisfy the consumer. This trend has also necessitated a re-think of circuitry used in modern Hi-Fi amplifiers, to drive such low impedance headphones, together with the traditional medium to high impedance versions also.


    Creek Audio has taken the unusual step of driving the headphone output socket of their EVOLUTION amplifiers from a dedicated low impedance source. Instead of the headphone output being sourced from the power amplifier, the headphone output is derived from a dedicated amplifier, with only a few Ohms in series for protection against short circuits. This dedicated HP amp is now located on the pre-amplifier circuit board.


    Creek Audio no longer makes a separate FM Tuner, but die-hard analogue tuner fans can continue to enjoy this valuable format by using the top-quality AMBIT plug-in tuner module, which augments the EVOLUTION 50A and 100A's capabilities. The AMBIT or RUBY modules are mounted on the back panel 'Smart-Slot', replacing Line Input 5. When the AMBIT is fitted, it automatically turns the amp into a Receiver, configurable for use in any region of the world. The OLED display shows all the tuner's functions and it's controlled by the left hand buttons and control knobs, as well as remote control.


    For vinyl fans, the EVOLUTION 100A can also be configured for Vinyl Disc input, using Line input 1. A SEQUEL 2 (40, 48 or 54) module can be plugged into a dedicated connector on the pre-amp PCB. It doesn't restrict the use of either the AMBIT or RUBY modules. Sequel 2 comes in three versions - 40dB MM, 48dB MC and 54dB MC.


    To simplify the many options a stylish system remote handset controls all the functions of the EVOLUTION 50 and 100 series. An optional IR extender to enable the products to be hidden away, but still operable via remote control.


    The EVOLUTION 100A is the most sophisticated and reasonably priced amplifier Creek has ever made. It provides stunning audio performance and is capable of out-performing other makes of amplifiers costing many times the price.


    This product is not eligible for discount.


    Creek Audio
    $2,195.00
    Integrated Amplifier
    Buy Now
  • Headphone Amp PH25.2 Headphone Amp PH25.2 Quick View

    $399.00
    Buy Now
    x

    Headphone Amp PH25.2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Marrying a gorgeous sounding tube pre-amp with solid-state amplification has been a technique for achieving unequaled sound quality in hi-end component audio since the advent of the transistor. While kicking around ideas for our new headphone amp we thought, why not try this same technique in a single component? We built one up and were blown away by the increased detail, clarity, and presence the design offered. The tube hybrid headphone amp was born. Hand assembled using the highest quality parts available the music hall ph25.2 will have you singing along with your favorite artists.


    This product is not eligible for discount.


    Music Hall
    $399.00
    Music Hall Headphone Amp PH25.2 Buy Now
  • Marantz HD-DAC Headphone Amplifier Marantz HD-DAC Headphone Amplifier Quick View

    $799.00
    Buy Now
    x

    Marantz HD-DAC Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Marantz HD-DAC1 Headphone Amplifier with DAC-mode


    This ultra-high quality dedicated Headphone Amplifier creates simply amazing sound because it uses Current Feedback amplification technologies from Marantz's high-end Premium 11 Series. Headphones have always added extra intensity to music, now with the Marantz HD-DAC1 that intensity reaches new climactic heights. This completely new product category comes with a new design, but as always with the unmistakable Marantz family resemblance.


    The powerful HD-DAC1 can drive audiophile high-impedance headphones up to 600 ohm - with complete MODE ease. All thanks to its three-level gain control, Marantz HDAM-SA2 modules, a high current audiophile DAC (CS4398), and its Premium Quality fixed and variable RCA outputs. It is so powerful it not only drives headphones, you can also directly connect it to your Hi-Fi integrated amplifier or to a pair of active speakers or power amps. It's also highly connectable.


    Optical and coaxial digital inputs as well as a USB-B port enable you to stream music directly from your PC or MAC; iDevices can also be connected via the USB port on the front. For even more connectivity we have also included an analog input. The USB-B works in asynchronous mode to support not only 192 kHz / 24bits high-resolution audio but also the DSD 2.8MHz and 5.6MHz for maximized performance and the most direct way to enjoy excellent quality. To safeguard quality when connected to a computer, we built extended isolation around the USB-B input to eliminate the chance of a high frequency noise being generated by the computer when entering the HD-DAC1. We even included a jitter remover and Dual Clock for extreme accuracy. Info on volume, input, resolution, etc. is shown on the stylish Marantz Porthole Display. The solid aluminum front is supported by a double layer bottom plate and retro-style side panels. Pure craftsmanship.


    Marantz
    $799.00
    Headphone Amplifier Buy Now
  • Lehmann Linear USB (On Sale) 2 COLORS AVAILABLE Lehmann Linear USB (On Sale) On Sale Quick View

    $1,399.00$1,119.00Save $280.00 (20%)

    Buy Now
    x

    Lehmann Linear USB (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Computer and High End audio are no longer a contradiction. Do you have any idea how great your headphones could really sound playing files from your computer? Try out the Linear USB now and be surprised!


    The Linear USB built-in DAC is meticulously built with an integrated Burr Brown DAC and separate voltage regulators of highest quality. The USB connector is only used to transport the signal and not as a power supply.


    The Linear USB is a high end headphone amplifier that will satisfy even the highest requirements for quality headphone music reproduction.


    The selectable gain (0 dB, 10 dB, 20 dB) of the Linear USB effectively optimizes the output level of the zero global feedback Class A output stage. Practically all high quality dynamic headphones available will show their best possible performance. Carefully selected top notch components and a highly sophisticated circuit design guarantee top performance listening pleasure.


    Perfect pre-amp for simples stereo setups.

    For stereo setups consisting of your computer and an additional analog source like a CD player or a turntable with a phono stage the Linear USB is the simplest and most effective active preamp one can think of. You don't even have to care about input switching because the unit detects the USB audio signal automatically!


    The faceplate and the massive milled aluminium knob for the smooth running 27 mm ALPS high grade volume control are available in anodized black or silver.


    To get the best out of your headphone from your computer you will have to try the Linear USB.


    Lehmann Audio
    $1,399.00 $1,119.00 Save $280.00 (20%)
    Headphone Amplifier - 2 Colors Available
    Buy Now
  • Audioengine N22 Amplifier Audioengine N22 Amplifier Quick View

    $199.00
    Buy Now
    x

    Audioengine N22 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    "If you're looking for a desktop system that will give you great musical satisfaction with no hassle, you can't go wrong with the N22 and P4 passive speakers..."

    - Positive Feedback


    Audioengine N22 Premium Desktop Audio Amplifier


    The N22 is a compact integrated stereo power amplifier and high-quality headphone amp. Connect your iPod, computer, and speakers or headphones for a great-sounding personal stereo system.


    More power in a smaller size

    Perfectly suited for your desktop or a smaller space in your home or office, N22 is easy to connect to your Mac or PC with no software to install or settings to change.


    No extra buttons

    The N22 has one simple volume control with an integrated on/off switch. No other buttons or knobs to figure out!


    Wireless-ready

    The N22 includes a USB power port that's perfect for powering Audioengine wireless adapters to stream your music wirelessly from your computer or iPod.


    Versatile

    Pair the N22 amp with Audioengine P4 passives (or any speakers) for a high-end mini desktop hi-fi music system. Connect your iPod, computer, and speakers or headphones for a compact and great-sounding personal stereo system. You can even connect a subwoofer to the variable line out and charge your iPod or smartphone through the USB power port. Two audio inputs are standard - RCA and mini-jack connectors - so you can plug in your computer, iPod or stereo directly.


    Part of the Family

    All Audioengine speakers and amplifiers share a similar voicing and tuning so that you are assured a matched system no matter which of our products you decide to add to your system.


    Hear the Difference

    The Audioengine N22 Premium Desktop Audio Amplifier sets a new level of audio and aesthetic quality and even further closes the gap between computer and home audio. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $199.00
    Audioengine N22 Premium Desktop Audio/Headphone Amplifier Buy Now
  • Rega Ear Headphone Amplifier Rega Ear Headphone Amplifier Quick View

    $395.00
    Buy Now
    x

    Rega Ear Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Ear Headphone Amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers.


    The Ear simply connects to the tape output of an amplifier via phono leads, the headphones are plugged into the front panel and there is a link socket incase you need your tape output sockets for other use.


    Rega
    $395.00
    Rega Ear Headphone Amplifier Buy Now
  • Manley Headphone Amplifier (Pre-Order) 3 COLORS AVAILABLE Manley Headphone Amplifier (Pre-Order) Quick View

    $2,950.00
    Buy Now
    x

    Manley Headphone Amplifier (Pre-Order)


    Manley Laboratories have been designing and manufacturing professional and hi-fidelity audio equipment for the last twenty five years. Headphone listening has become more and more popular in recent years. To meet this new demand Manley have combined its professional and domestic engineering skills to develop a new and exciting groundbreaking product, The Manley Headphone Amplifier.


    Headphone listening is not new to us, we have developed headphone mixers for the professional industry and our Neo-Classic 300B preamplifier was designed with the serious headphone listener in-mind, which now has quite a cult following. The new Manley Headphone Amplifier addresses absolutely every possible feature the headphone user could desire.


    Feature Rich


    This feature rich product has no less than twelve independent controls designed for maximum performance and maximum control. We design and manufacture our own output transformers and this is where this product excels. The Manley Headphone Amplifier utilizes hand-wound air gapped dual mode output transformers. The user can configure the unit for all triode Push-Pull mode or Single-Ended mode. The transformer can be configured to drive three types of headphone loads, covering a range from 12 to 600 ohms.


    The enthusiast can also vary the Feedback from 0dB to 10dB, maintaining a ruler-flat frequency response across the audio band, demonstrating how stable the design is. For increased transparency and accuracy we have incorporated a Precision Stepped Relay Volume control with perfect channel balance. A balance control is also available for extra sensitivity. The Manley Headphone Amplifier operates fully symmetrical, enabling it to drive balanced headphones through its XLR output. Also available is the standard non-balanced "Jack" plug or TRS connection. Another very useful feature is a preamplifier output, which routes your first input through the system when not in use, no need for unplugging sources! The Manley Headphone amplifier can also be used as a stand-alone transformer coupled preamplifier, so it can be partnered with any power amplifier if so desired.


    With the advent of expensive and high technology headphones it was important for the Manley design team to think about protection. So the Manley Headphone Amplifier features a user defined headphone overload protection system. The user dials this in so precious headphones are never overdriven. For maximum performance and the lowest noise floor, The Manley Headphone Amplifier incorporates a very high-tech switching audiophile power supply. The high-tension and low-tension rails are all fully regulated offering super low impedance for a fast and dynamic response.


    The Manley Headphone Amplifier also incorporates a tone control circuit what? for an audiophile product!! Yes! With the expertise gleaned from building professional studio equipment, we have incorporated the best possible solution for a tone control. It is completely switchable, so for the real purist it is completely out of the circuit, but if you need that slight adjustment for a hard digital recording the feature is there.


    The Design


    The Manley Headphone Amplifier is a very unusual design. Zia Faruqi, who is responsible for running the engineering team and industrial design at Manley Laboratories, developed its concept. "I wanted a design that would reflect the use of this piece of equipment. Its shape was inspired by a head, a piece that you could rest your headphones on, a piece that you want to indulge yourself in" Mitch Margolis who worked on the Steelhead and our 300B amplifiers worked with our head engineer Humberto Rodriguez to finalize its design. Available in three different colors for today's lifestyle choices. Champagne & White, Titanium & Bronze and Copper & Black.


    Manley Labs
    $2,950.00
    Headphone Amplifier PRE-ORDER
    Buy Now
  • AmpsandSound Kenzie Headphone Amplifier AmpsandSound Kenzie Headphone Amplifier Quick View

    $1,650.00
    Buy Now
    x

    AmpsandSound Kenzie Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    AmpsandSound headphone amplifiers are the truest expression of their mission to bring tested designs and minimalist values to personal audio.They have chosen to utilize only single-ended, zero feedback tube designs to bring back warmth and musicality to personal audio. Each model balances the desire for power, the need for quite operation and the desire for wide bandwidth. The ampsandsound sonic signature closely approximates the best aspects of the classic tube sound of the 50s (maximum midrange bloom), supplementing it with a modern bass signature and transient speed.


    Like many of their products, the Kenzie headphone amplifier evolved from earlier designs - in this case, rave reviews about the SE-84's headphone section. The inevitable question followed; why didn't they build a dedicated headphone amp?


    Why indeed?


    After some research, they came to the conclusion that a headphone amplifier building on the much loved Darling circuit was the right choice for them. The outstanding performance of the Kenzie headphone amplifier is made possible with custom wound ultra-high quality output transformers providing amazing frequency extension.


    The Kenzie does not use a voltage network, and has more than enough power to drive even the most difficult headphones. They chose 32 ohms and 600-ohm output taps to allow use with the widest variety of headphones; everything from Grado Labs, HiFiMan, Audeze, MrSpeakers, Sennheiser, and Beyerdynamic.


    The Kenzie showcases the transformers on the chassis to frame in the unique 1626 single-ended tubes. They have included an ALPS volume pot to allow attenuation and simplify the signal path.


    The Kenzie is one of the sweetest-sounding headphone amplifiers on the market. The 1626 is commonly referred to as the "Poor Man's 300B"; offering a similar level of warmth, texture, and soundstage depth.


    The 1626 is a WWII-era tube that was used as a transmitter tube in radar installations. The design is shy on pure output, but offers layers of texture and drive, and is paired with a massive choke and robust output transformers for ultra-quiet operation. As with all AmpsandSound products, parts selection was crucial during this build and each chosen not for price, but for best quality and synergy.


    The Kenzie is handmade in Southern California with U.S.-sourced parts and custom hand-wound output transformers.


    AmpsandSound
    $1,650.00
    Headphone Amplifier Buy Now
  • Tube Phono Amplifier By Bellari VP130 Tube Phono Amplifier By Bellari VP130 Quick View

    $275.00
    Buy Now
    x

    Tube Phono Amplifier By Bellari VP130


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    It was quiet, and golden-sweet and liquid in the midrange, as you'd expect from a 12AX7-based phono preamp.

    - Michael Fremer, Stereophile


    The vp130 is a tube phono preamp with a built in headphone amplifier for use with moving magnet and high output moving coil cartridges. The vp130 is designed to amplify an RIAA equalized phono signal to a hi level signal. Since the unit utilizes tube circuitry the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.


    Music Hall
    $275.00
    Bellari VP 130 Phono Amp Buy Now
  • Audioengine D1 DAC Audioengine D1 DAC Quick View

    $169.00
    Buy Now
    x

    Audioengine D1 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Premium 24-bit DAC


    Audioengine D1 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's soundcard or headphone output and send audio through USB or optical. D1 is the perfect digital interface between your computer and music system and will improve the sound of ALL your music.


    Versatile

    The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player. And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.


    Designed for the Computer Audiophile

    D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.


    Easy Setup

    Setup is easy and no special software is needed, making D1 a true plug-and-play solution. The D1 outputs connect to any audio system or powered speakers, such as the Audioengine A5+ or A2. Power for the D1 is provided via the USB bus so there is no external power supply to connect.


    See and Hear the Difference

    Audioengine designers, with their attention to audio quality as well as visual aesthetics, have created a feast for both the eyes and ears. The rounded anodized aluminum case of the D1 reflects traditional Audioengine design and the audio fidelity is typical of Audioengine's commitment to great sound at an affordable price. The Audioengine D1 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $169.00
    Audioengine D1 24 bit Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • Klipsch PowerGate Amplified PlayFi Wireless Gateway Klipsch PowerGate Amplified PlayFi Wireless Gateway Quick View

    $499.00
    Buy Now
    x

    Klipsch PowerGate Amplified PlayFi Wireless Gateway


    Featuring a 2 x 100 watt class D amplifier, the Klipsch PowerGate can drive even the most difficult speaker. So whether you use a pair of bookshelf speakers in the office or connect a pair of Klipschorn speakers, the PowerGate will deliver the goods.


    As part of the Klipsch Stream wireless multi-room audio system, anything you plug into the PowerGate can be selected and streamed for playback in any room(s) of your house where Klipsch Stream products are located.




    Everything You Need

    The PowerGate has high resolution digital audio inputs for 192kHz 24-bit sound. Connect your computer, Blu-Ray, CD player, or anything else and enjoy the high-resolution 2-channel stereo sound.


    The PowerGate is an incredibly versatile product. Use it as a traditional 2-channel stereo amplifier, a tabletop USB DAC Headphone Amplifier, and you can use it with your Klipsch Stream Wireless Multi-Room Audio system for playback of the audio sources on the network in your room.




    Phono Pre-Amp & RCA Inputs? Yes, Please!

    The Klipsch PowerGate also includes a selectable phono pre-amp/RCA line-level input, so you can even connect analog sources such as your record player, cassette player, or 8-track player (yes, we know you're out there).




    Easy To Control

    The PowerGate features integrated controls on the front panel that make it easy to select the source, pair Bluetooth®, adjust the volume, adjust the subwoofer volume and mute the sound. A remote control is also included. And if you're using it as part of the Klipsch Stream Wireless Multi-Room Audio system, you can also use the Klipsch Stream app to control it.




    Need More To Bass

    The Klipsch PowerGate also incldues a low frequency audio output, making it easy for you to add a subwoofer to your local setup. Additionally, stereo RCA audio outputs make it easy to to run audio out to an external amplifier if you wish.




    Wireless Streaming To Any Room

    The Klipsch PowerGate makes it easy for you to rebroadcast any audio source to other rooms in your Klipsch Stream Wireless Multi-Room Audio system. Enjoy in-room listening by selecting the line in from the Klipsch Stream app. You can even enjoy your LPs in multiple rooms of your house.


    rockrollkeepers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Klipsch
    $499.00
    PowerGate Amplified PlayFi Wireless Gateway Buy Now
  • AmpsandSound Mogwai Headphone Amplifier AmpsandSound Mogwai Headphone Amplifier Quick View

    $1,850.00
    Buy Now
    x

    AmpsandSound Mogwai Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    Like many AmpsandSound products, the Mogwai evolved from their earlier designs, borrowing from the Bigger Ben and Classic Wonder, while embracing the form factor of the Kenzie. The Mogwai offers more than an entry point for tube amps, but a hybrid product, meant for both headphone and loudspeaker use.


    Their circuit offers the ability to roll a wide variety of tubes inexpensively and bring increased power to headphones without any sacrifice of design choices that conflict with our values.


    The Mogwai combines the features of a full-sized two-channel power amplifier and headphone amplifier in a chassis that is suitable for a desktop use.


    The Mogwai utilizes single-ended Class A operation with zero feedback to provide the essence of our Classic Wonder sound; strictly old school SET sound, without having to spend hundreds if not thousands of dollars on tubes.


    The performance of the Mogwai is made possible with custom wound ultra-high quality output transformers from Transcendar, which provide excellent frequency extension and a flat response.


    The Mogwai does not use a voltage divider network, but depends on transformers instead. They chose a 32 ohm tap for headphones to offer a dedicated selection for the widest range of headphones, and an 8-ohm loudspeaker tap to connect the Mogwai to moderately efficient loudspeakers.


    The Mogwai displays its transformers prominently on the chassis to frame in the tube compliment, which can vary from a 6L6GC to a KT88.


    Volume control is handled by the ALPS volume pot to allow attenuation and simplify the signal path. Zero feedback on the outputs negates the need for a pre-amplifier; an iPhone can drive the Mogwai without issue.


    The Mogwai differs from the Kenzie as it aims to provide powerful output while remaining true to classic tube design. As with all ampsandsound products, they strive for a neutral, non-fatiguing sound, and demand that all our products be ultra-quiet in operation. Quiet operation is not just a goal but a guiding principle that shapes all design and implementation choices.


    The Mogwai is handmade with pride in Southern California with US-sourced parts, including our precision transformers.


    AmpsandSound
    $1,850.00
    Headphone Amplifier Buy Now
  • AmpsandSound Agartha Headphone Amplifier AmpsandSound Agartha Headphone Amplifier Quick View

    $3,600.00
    Buy Now
    x

    AmpsandSound Agartha Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    The name Agartha used to describe a city in the center of the world. The ampsandsound Agartha brings the legendary 300b to personal audio. They chose the 300b for its long history as the king of triodes. Combining a single gain stage, zero feedback and careful attention to grounding techniques they are able to use a 300b with headphones without hum or noise. For those with headphone, horns or single driver speakers who are seeking audio nirvana, the Agartha is built with exacting attention to parts selection and implementation.


    The Agartha tube amp pairs a 6SL7 tube for front end with SS rectification enabling great transient peeks, faster/livelier presentation and ultra-quite operation. The Agartha uses direct-heated triodes with zero feedback providing the classic single-ended sound so widely loved.


    Typical of all ampsandsound amplifiers, the power supply is massive. This combined with a generous choke yields our trademark low noise; less than 3mv at idle, and stable output of 5 watts RMS into an 8ohm load and 1watt into a 32ohm headphone. Frequency response is 12hz to 30hz at 1 watts, 1-db. Output iron has been carefully selected to reduce distortion and increase frequency response. And of course we also use our 5% capacitors and 2% resistors.


    The motivation of the Agartha is to provide access to the wide availability of NOS tubes and give the warm mid-range bloom that is at the heart of single-ended direct-heated triode designs. Tube set included.


    AmpsandSound
    $3,600.00
    Headphone Amplifier Buy Now
  • AmpsandSound LeeLoo Headphone Amplifier AmpsandSound LeeLoo Headphone Amplifier Quick View

    $1,850.00
    Buy Now
    x

    AmpsandSound LeeLoo Headphone Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    The Leeloo was cheeckily named after the main character in the movie The 5th Element Love! Leeloo is a unique amplifier combining headphone amp and stereo with dedicated taps for each and a volume control to provide easy integration with any source. Leeloo is the best of single-ended bliss, ultra linear power and mild feedback for improved frequency extension and noise floor. Paring a single 12ax7 in the preamp section with a pair of EL84s, the SE-84 doesn't require an external preamp and can be driven to full output with an iPod or smartphone. Coupling caps are high grade Wima, we use 2% resistors, and our usual robust power supply including massive choke regulation to drive the D/C ripple and noise floor to the lowest levels we every seen. The SE-84 driven by an iPod makes a fantastic combo for a 2nd system or smaller room. 2.6 watts may not seem enough, but the bass presence and sound stage will make a convert of you. Perhaps the most astonishing feature of Leeloo is the 1watt into 32ohm loads able to drive even the most demanding headphones with ease.


    The SE-84 is small in physical size (12"x 10") and built into a gorgeous Solid Eastern Walnut Cab with ebony corners. The finish is hand rubbed lacquer. The SE-84 will be at home in your rack or as a statement piece in your office.


    Each amspandsound amp is built with attention to grounding schemes - star grounding and use of common ground contributing to its very low noise floor and wide bandwidth. Leeloo pairs well with most speakers 89db and above, but like all our amplifiers it is quiet enough to use with full-range or horn-loaded speakers having 100db efficiency and above. Speakers that can go cleanly down to 30hz really bring out the very best of the amp.


    Leeloo is handmade with pride in Southern California with US-sourced parts, including our precision transformers.


    AmpsandSound
    $1,850.00
    Headphone Amplifier Buy Now
  • Audeze LCD-MX4 Headphones Audeze LCD-MX4 Headphones Quick View

    $2,995.00
    Buy Now
    x

    Audeze LCD-MX4 Headphones


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Powered by Audeze's patented Fluxor magnets, the LCD-MX4 focuses 1.5 Tesla of magnetic flux on the lightweight 20 ohm impedance diaphragm. It is perfect for use where one isn't likely to have a dedicated high-powered headphone amp and can be driven easily by a laptop, mixing console or audio interface.


    The LCD-MX4 headphones' new lightweight design includes a durable magnesium housing with a carbon fiber headband. Significantly lighter than the LCD4 model, the new MX4 is the choice for long mixing sessions and hours of critical listening.


    A perfect combination of the LCD-X and LCD-4, the LCD-MX4 has the easy-to-drive diaphragm and voice coil of the LCD-X combined with the extreme magnetic force of the LCD-4. It features a different soundstage presentation than the LCD-X or LCD-4 to help simulate a room's sound.


    Made in Audeze's Southern California facility to their exacting standards.


    Audeze Headphones
    $2,995.00
    Headphones Buy Now
  • Audeze LCD-X Headphones Audeze LCD-X Headphones Quick View

    $1,199.00
    Buy Now
    x

    Audeze LCD-X Headphones


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    LCD-X In Gunmetal Gray Anodized Aluminum Rings In Black Lambskin


    The reference-level LCD-X is an exciting addition to our LCD planar magnetic headphone collection. The LCD-X features a newly-developed and processed transducer made of a thinner and lighter alternative material with new Fazor technology.


    Our patent-pending Fazor elements are unique to the LCD-X and LCD-XC and help guide and manage the flow of sound in the headphone. The result is improved phase response, greater frequency extension, smoother frequency response, and remarkable 3D holographic imaging.


    The LCD-X transducer is specifically designed to work with a wide variety of driving sources. From portable players to studio use, the LCD-X provides high volume without a headphone amplifier even though all LCD-series products benefit from a high-quality amp.


    The LCD-X earcups are made from polished anodized aluminum with sloped ear pads of either premium lambskin leather or a leather-free super-suede microfiber fabric. The earpads are designed with specially-crafted foam offering the proper firmness and acoustic balance.


    Audeze Headphones
    $1,199.00
    Audeze LCD-X Headphones - Black Lambskin Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Lehmann Rhinelander 2 COLORS AVAILABLE Lehmann Rhinelander Quick View

    $499.00
    Buy Now
    x

    Lehmann Rhinelander


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Rhinelander headphone amplifier is based on the legendary Linear by Lehmannaudio which is used by well known professionals like A.J. van den Hul, Andreas Spreer (TACET) and Maarten de Boer (The Masters).


    Now you can experience a huge part of the Linear's transparency, tonal balance and micro-detail at only a fraction of the cost. The Rhinelander will find its place in the highly competitive group of ambitioned budget conscious audiophile listeners. Available Now!


    Discrete Zero Global Feedback output stage with high quiescent current, double sided audio board, low ESR electrolytic caps, MKP caps in the signal path for perfect transient response and ambience reproduction, audiophile voltage amplifier stage and a Neutrik headphone jack. All these features are hard to find with other devices in this price range.


    Headphone amp, reconfigurable to single-source pre-amp

    Additionally, Rhinelander is equipped with two inputs and a relays source selection. If you don't need the second line input, you can reconfigure the input jack to a output. All you need to do is to replace two jumpers. This way you can use Rhinelander as a single source pre-amplifier, similar to our Linear.


    Even with entry-level devices, Lehmannaudio puts a lot of effort in details: The audio device's enclosure is made of non-magnetic, anodized aluminum.


    Lehmann Audio
    $499.00
    Headphone Amplifier - 2 Colors Available
    Buy Now
  • Marantz CD6006 Home CD Player Marantz CD6006 Home CD Player Quick View

    $499.00
    Buy Now
    x

    Marantz CD6006 Home CD Player


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Marantz CD6006 Home CD Player


    The new CD6006 is a fine-tuned version with even more specially selected components and new layout circuit compared to its CD6005 predecessor. We also added more rigid feet to further eliminate vibration. The oversized power supply feeds the digital and analog circuitry of the player, where the high-quality CS4398 DAC converts digital signals to analog, this is then 'pushed' to the gold-plated synch outputs by Marantz's own small signal amplifier, the HDAM-SA2. In addition, we have included a new remote that also controls the PM6006 amp.


    The CD6006 is a match made in heaven for the music lover who wants nothing but the best performance at an attractive price, and it is also perfect for lovers of portable music, thanks to its iPod-digital connectivity. The CD6006 also features a newly developed, complex headphone amplifier with Headphone amp gain setting for a wider range of headphones.


    Marantz
    $499.00
    Home CD Player Buy Now
  • Lehmann Linear SE (On Sale) 2 COLORS AVAILABLE Lehmann Linear SE (On Sale) On Sale Quick View

    $2,199.00$1,799.00Save $400.00 (18%)

    Buy Now
    x

    Lehmann Linear SE (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The next stage of the successful Linear headphone amplifier sets new benchmarks as to sound quality and the direct musical experience. And you are invited to define the look of your Linear SE.


    For those who have been dealing with headphones, our headphone amplifier by the name of Linear is a household name. The Linear has already enchanted thousands of music lovers all over the world and is also a constant with the most demanding industrial customers. From the WDR Studios to Sennnheiser headphones to the Galaxy Studios, from Audiamus to Zimmerli the Linear is highly valued and the reference unit in tests for hi-fi and studio magazines worldwide.


    The Linear SE headphone amplifier: the next logical step

    As the technical advancement based on the successful Linear headphone amp, the new Linear SE comes factory-equipped with Mundorf caps both in the power supply and signal path, vibration absorbing SSC feet and also an AHP fuse and Mogami cables inside.


    The Linear SE lets you experience music over your headphone in a new way. Suddenly never noticed details and the intention of the musicians are revealed. You will hear the music as a complete artwork and still plunge deep into the realm of individual sounds.


    Lehmann Audio
    $2,199.00 $1,799.00 Save $400.00 (18%)
    Headphone Amplifier - 2 Colors Available
    Buy Now
  • AudioQuest DragonFly USB DAC 2 VERSIONS AVAILABLE AudioQuest DragonFly USB DAC Quick View

    $99.95
    Buy Now
    x

    AudioQuest DragonFly USB DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    DragonFly Black & DragonFly Red


    AudioQuest is truly pleased to introduce two dramatic
    steps forward-two new DragonFlys with unprecedented
    audio quality and even higher performance-to-cost ratios-and,
    drum roll, they work with Apple and Android™ phones!
    Yes, that last point is a biggie. From the day that the original
    DragonFly came out, we got requests for a DragonFly-quality
    DAC to use with smartphones. Finally, thanks to newly
    available parts, power draw is now well within what any
    phone will authorize.


    We've been busy for years making this new generation of
    DragonFlys possible. AudioQuest worked alongside Microchip
    Technology to develop a new high-performance, full-speed
    USB microcontroller (a DAC's input processor) that delivers
    improved signal-to-noise ratio and significantly lower power
    consumption. Drawing 77% less current than the DragonFly
    v1.2's microcontroller, the new Microchip MX microcontroller
    enables true compatibility with Apple and Android smartphones
    and tablets. For use with Apple iOS devices, Apple's
    Lightning-to-USB Camera Adaptor is required; for use with
    Android devices, a Made for Android (OTG) adaptor, such as
    our DragonTail USB Adaptor For Android Devices, is required.
    We hesitate to brag about specific electronic parts in the
    DragonFlys because the implementation of those parts is
    as crucial as their quality. Please don't make the mistake of
    thinking that DACs with the same microcontroller or primary
    processor all sound alike! Depending on the circuit design,
    control of noise, power supply regulation, quality of the many
    passive parts, etc., a supposedly "lesser" DAC chip can easily
    outperform a "better" DAC chip in a different DAC.


    Also, as with cameras and their previous race to have more
    pixels than the other guy, playing the numbers game can
    distract and deceive. While the DAC chips in both the Black
    and Red DragonFlys have great capability, we have chosen
    to limit DragonFly Red and Black processing to 24-bit/96kHz.
    This makes using the DragonFlys as simple as it's always been,
    fully compatible with PCs, etc., without having to download
    and install new drivers. Though maybe more importantly,
    faster processing can mean more noise, so while playing
    24/192 files with some of the best component DACs does offer
    sonic advantages, many DACs actually sound better when
    the computer down-samples a 24/192 file to 24/96 before
    sending the data to the DAC. Our point is that AudioQuest
    plays a music-quality game first and foremost. DragonFlys
    are designed to be the-best-they-can-be Emotional Transportation
    for your music, whether Spotify, YouTube videos, Tidal,
    ripped CDs, or state-of-the-art Hi-Res files.


    Back to bragging about our internals: The new DragonFly
    models also incorporate improved 32-bit ESS Sabre DAC
    chips-the 9010 in Black and the higher-performance 9016
    in Red-both of which employ minimum-phase filtering for
    naturally detailed, more authentic sound. While DragonFly
    Black uses the same high-quality headphone amp and analog
    volume control found in the DragonFly 1.2, DragonFly Red
    includes the latest ESS headphone amp and a bit-perfect
    digital volume control that resides on the 9016 DAC chip
    itself-a sophisticated implementation that ensures maximum
    fidelity, dynamic contrast, and signal-to-noise ratio.


    Those of you who remember how we bragged about the
    DragonFly v1.0 and v1.2 having an analog volume control
    might now be going "huh?" Good question! It's a matter of
    capabilities. The earlier DragonFlys and the Black feature
    an analog volume control because that's a better-sounding
    approach than most digital volume controls, which cut off
    bits in order to reduce the volume. However, when a digital
    volume control, as in the new DragonFly Red, doesn't
    compromise the signal, doesn't reduce finesse and subtlety
    and low-level detail, then a bit-perfect digital volume control
    is superior. Once more, it's not about a particular part or
    sample rate or buzz word-it's about honoring the quality of
    the resulting sound above all else.


    DragonFly Black outputs 1.2 volts-enough power to capably
    drive all preamplifier input circuits and all reasonably
    efficient headphones. Meanwhile, with its higher 2.1-volt
    output, DragonFly Red is compatible with an even wider
    range of headphones, including power-hungry, low-efficiency
    models. For reference, DragonFly 1.0 and 1.2 featured
    1.8-volt output.


    The difference in maximum output between DF Black and DF
    Red is essentially irrelevant with our NightHawk headphones,
    as they can be easily driven by either model, but Red's
    higher output is an important advantage with some of the
    more inefficient headphones on the market. However, the
    difference in sound quality between the two new models
    is always meaningful, and is important whether feeding
    headphones or the Aux input of an audio system. At the same
    volume, Red has much more "torque," "grip," and "muscle"
    than Black. Red simply sounds cleaner and clearer overall,
    enabling a larger soundstage with each instrument or voice
    more nearly in its own space.


    And, more good news: The new DragonFlys are software
    upgradeable through complimentary Windows and OS X
    desktop applications. As new developments arise in music
    player applications, streaming protocols, or other associated
    software, DragonFly users will be able to incorporate those
    updates into their existing devices.


    DragonFly Black for only $99, with better sound than any
    previous DragonFly for less money than any previous
    DragonFly, and DragonFly Red with much better sound at
    only $199-and both compatible with phones-how much
    good news can you stand?!


    AudioQuest
    $99.95
    USB DAC + Preamp + Headphone Amp (2 Versions Available)
    Buy Now
  • Audioengine D3 DAC Audioengine D3 DAC Quick View

    $99.00
    Buy Now
    x

    Audioengine D3 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audioengine D3 Premium 24-bit DAC


    - Connect D3 to a USB port on your Mac or PC and send high-quality music to your headphones or any audio system.

    - D3 includes a USB DAC and headphone amplifier for incredible audio performance in a portable design.

    - Audioengine D3 is the perfect intro to computer audio!


    The Audioengine D3 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's headphone output and send music directly through a USB port for noticeably improved fidelity and a higher output. The D3 is a powerful yet portable converter with performance and features usually found in more expensive DACs and is the perfect interface between your computer and headphones or any music system.


    Easy setup

    Setup is easy and no special software is needed, making D3 a true plug-and-play solution. The D3 plugs directly into a USB port on your computer so no external power supply or cables are needed. The output of the D3 connects to headphones, Audioengine powered speakers, or any audio system. The D3 also has a sample rate indicator that shows sample rates above 48K so you'll know you're getting the most out of your HD music.


    Versatile

    The quality of most computer headphone outputs isn't generally very inspiring, so the D3 provides a better option by streaming audio from your computer's USB port and directly connecting to your music system or headphones. The D3 DAC is the perfect way to get great-sounding music not only from your computer to headphones but also from your computer to any music system.


    Designed for the headphone enthusiast

    D3 will process digital audio at any bit depth up to 24 bits and any native sample rate to 96KHz. With it's high signal-to-noise ratio and low distortion, the D3 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone amplifier was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiast with its high output and revealing sound. The D3's asynchronous data transfer carefully controls USB streaming audio from any computer which greatly improves audio performance.


    See and hear the difference

    The aluminum case of the D3 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine's commitment to great sound at affordable prices. The Audioengine D3 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $99.00
    Audioengine D3 Premium Portable 24 bit USB Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • PS Audio Sprout100 PS Audio Sprout100 Quick View

    $599.00
    Buy Now
    x

    PS Audio Sprout100




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Sprout100 is the all-new, heavily-updated replacement for the original PS Audio Sprout. Many improvements have been made: we doubled the output power, we fully redesigned the headphone amplifier, and we included Stereo-RCA analog in/outputs, a DAC that decodes full resolution PCM & DSD, a subwoofer output, and a sleek, brushed aluminum remote control. Sprout100 is identical to the original PS Audio Sprout in many ways as well: size, shape, look and feel. Materials of machined and bead-blasted aluminum. Real walnut. And all the sound quality you have come to expect from PS Audio.


    Scott McGowan grew up at the PS Audio factory, sharing his father Paul's love of music and high-end performance audio. But he disliked the complexity, cost and tangle typical of Audiophile systems. Why couldn't he have the performance levels of his father's creations packaged in a single, beautiful product he and his friends could afford to own? It should be powerful yet simple to operate. Its aesthetics should be inspired by the "less, but better" designs of Braun's Dieter Rams and Apple's Jony Ive. He would call it Sprout.


    Sprout100, the newest edition of the beloved original, is a simple, elegant source of music for those who want quality sound without the hassles that come with it. Appealing to the eye and ear, solid and reassuring to the touch, Sprout's user interface is human, providing visual and audible feedback to the user and connecting her to the music. Sprout's ease of use makes it appealing and accessible to music lovers around the world. It features a phono preamplifier for vinyl, a Bluetooth receiver for music streamed from smartphones, a high-quality hi-res DAC to handle anything stored on a computer, enough power for any speaker, and a headphone amp that drives even the toughest loads.


    Sprout is for those who care about their home, their music, and their enjoyment of music in their home. We believe there are a lot of such folks out there.


    Scott chose the name Sprout to represent what he saw as a rebirth of hi-fi in the home, a chance to get away from massive, unaffordable instruments that dominated living rooms and required a pilot's license to operate.
    Rather than a display screen and endless menus, Sprout's user interface is a direct hand-to-Sprout connection through two precision rotary switches as well as a handheld remote control. The front panel controls allow intuitive, direct control of the device, and provide feedback to the user through a positive click, while the new remote control offers the convenience you'd expect.


    Sprout's ease of use makes it appealing and accessible to those who would find most audio gear intimidating. It's also appealing to those who have "been there, done that", and seek a better, simpler way to play music in their home. Sprout simultaneously appeals to those making their first purchase of an audio component-and those making their last purchase, seeking quality without complication.



    PS Audio
    $599.00
    Sprout100 Integrated Amplifier Buy Now
  • Marantz HD-AMP1 Digital Integrated Amplifier Marantz HD-AMP1 Digital Integrated Amplifier Quick View

    $1,099.00
    Buy Now
    x

    Marantz HD-AMP1 Digital Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    HD-AMP1 Digital Integrated Amplifier with USB-DAC


    Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).


    The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.


    Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.


    Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.


    The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.


    There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.


    The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.


    Marantz
    $1,099.00
    Digital Integrated Amplifier Buy Now
  • 1
  • 2
Go to top