Pro-ject Authorized & Certified VPI Dealer

VINYL. OUR WAY OF LIFE SINCE 2004

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Ifi Audio

'
  • 1
  • 2
Results per page:
  • iFi Audio AC iPurifier iFi Audio AC iPurifier Quick View

    $99.00
    Buy Now
    x

    iFi Audio AC iPurifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The mains power supply is the 'gasoline' that fuels an audio system. And, whether it is clean or contaminated, it has a material impact upon the quality/enjoyment of playback.
    The AC iPurifier is the latest iFi product from the 'power products' stable to clean-up noisy mains supplies.


    It is no ordinary mains purification product. Technologically advanced, it's an active not a passive product so it goes above and beyond and cancels far more noise across the frequency range than other passive devices.


    The AC iPurifier was designed to be used in ANY mains powered audio system. It is particularly effective at dealing with modern audio systems that have an abundance of generic and varied power supplies (see next section for a more detailed, technical explanation).


    Where extension blocks are used, the AC iPurifier can be used to isolate certain types of power supplies for the maximum noise reduction.


    iFi Audio
    $99.00
    Power Filter Buy Now
  • iFi Audio micro iDSD Black Label iFi Audio micro iDSD Black Label Quick View

    $599.00
    Buy Now
    x

    iFi Audio micro iDSD Black Label


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Heart Of Dual-Core Burr-Brown Remains At The Core


    Both Analogue Signal Processing Circuits New And Improved


    Only AMR/iFi Goes To These Lengths


    MELF, C0G And Sanyo OS-CONs Wherever Possible


    The iFi micro iDSD Black Label is the newest iFi micro flagship product. At the heart, beats the Burr-Brown DSD512/PCM768/2xDXD True Native® DAC with headphone amplifier.


    The Black Label looks very good on the outside yet the inside is even better where relentless attention has been paid to advancing the sonics with the very latest components:


    • DAC digital signal and digital power sections upgraded
    • AMR Global Master Timing® femto-precision clock system upgraded for 'super low' phase-noise/jitter
    • Analogue signal and power sections revised
    • 3D+® performance-tuned / XBass+® performance-tuned
    • Latest Output stabilisation network offers less distortion


    The micro iDSD Black Label. The best, evolved.


    iFi Audio
    $599.00
    Battery-powered DAC Buy Now
  • iFi Audio micro iDAC2 iFi Audio micro iDAC2 Quick View

    $379.00
    Buy Now
    x

    iFi Audio micro iDAC2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    True Native® Playback Of DSD And PCM


    Quad DSD256 Or PCM384kHz


    The Audio Signal Has The Purest Path


    The iDAC was good. It was very good and cultivated a very loyal following among customers and reviewers alike. The iDAC2 is the all-new 2015 version. It is a totally new design that has drawn upon the widespread praise garnered by the nano iDSD and micro iDSD.


    What is it? State-of-the-art DAC/headphone amplifier For home, desktop or portable use.


    iFi Audio
    $379.00
    DAC / Headphone Amplifier Buy Now
  • iFi Audio nano iGalvanic3.0 iFi Audio nano iGalvanic3.0 Quick View

    $379.00
    Buy Now
    x

    iFi Audio nano iGalvanic3.0


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Unique Double Dose - Before And After Galvanic Isolation


    True Native USB Chipset


    Ultra Audiophile Grade (0.5uV) Super Quiet Power Supply


    Galvanic Isolated 5.0Gbps USB3.0 Superspeed


    Ensures The iGalvanic3.0 Suits Different Systems


    The iGalvanic3.0 is a ground-up design with full-galvanic isolation on USB3.0 and USB2.0. It is a through and through ultra audiophile-grade galvanic isolation device aimed purely at computer audiophile systems and nothing else.


    "Galvanic isolation is a design technique that separates electrical circuits completely to eliminate stray or noise currents. Signals can pass between galvanically isolated circuits, but stray or noise currents, such as differences in ground potential or currents induced in AC power, are blocked."


    It is these stray currents that create noise in the system. Although iFi audio and others have created devices that kill noise, achieving galvanic isolation on USB3.0 is the 'holy grail' of computer audio. It has been sought by many but never actually achieved. Until now! The iGalvanic3.0 is the ultimate one-stop USB enhancement solution for every computer audiophile:


    • Audiophile-grade galvanic isolation
    • REclock2/REgenerate2/REbalance2
    • Clean USB ultra power supply*

    *Measured noise floor is 0.5uV(0.0000005V). bettered only by the iFi's own micro iUSB3.0(0.1uV).


    The iGalvanic3.0:


    • Breaks ground loops
    • Avoids noise-coupling in applications that require hi-speed USB transfers
    • Dramatically improves sonic performance
    • Can be dialed into ANY computer audio system

    The iGalvanic3.0 is the perfect solution for computer audiophiles through to recording studios seeking maximum sound quality from their USB digital audio system.


    iFi Audio
    $379.00
    Isolation Device Buy Now
  • iFi Audio nano iOne iFi Audio nano iOne Quick View

    $199.00
    Buy Now
    x

    iFi Audio nano iOne


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Burr-Brown Multibit True Native Chipset


    FET High-Def Input With Reclocking/Line Driver


    Noise Suppression System For Quiet Power Supply


    DSD256/PCM384 Capable


    At iFi we believe that high quality sound is a way of life. The nano iOne was created for both audiophiles and those who yearn for better sound quality from their existing home systems.


    Whether you use Nvidia Shield, Google Chromecast or a 4K television, hook your system up to a gaming console such as the XBox One, Playstation 4 or simple enjoy music through your smartphone, tablet or computer, the iOne is the one for you. Add it to your audiophile rig to push the boundaries of high-quality sound to a whole new level.


    It is ideal for:


    • Home systems - add Bluetooth to stream Spotify via computer, phone or tablet.
    • 4K televisions - improve sound quality to match picture quality
    • Gaming consoles - elevate movie soundtracks and gaming effects to the max by connecting the optical output to the iONE then the analogue outputs to active desktop speakers or headphone amplifier.
    • S/PDIF only DACs - use USB/Bluetooth input to convert to S/PDIF output.

    The iOne is neither a one-trick pony nor is it a jack-of-all-trades. It is simply incredibly versatile and offers cutting-edge technology, with each separate function designed and implemented with as much care and dedication as they would receive in a single function device from iFi Audio.


    iFi Audio
    $199.00
    DAC Buy Now
  • iFi Audio iPurifier2 2 TYPES AVAILABLE iFi Audio iPurifier2 Quick View

    $119.00
    Buy Now
    x

    iFi Audio iPurifier2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The USB audio platform is well-established, yet as with any audio transmission protocol, unwanted factors hinder the audio quality. iFi's obsession with 'cleaning up' the USB audio chain drawn from the knowledge base of AMR. As early as 2012, iFi invented the first USB power regenerator - the iUSB Power. This was swiftly followed by professional USB audio cables - the Mercury and Gemini. Later came the USB audio filter - the original iPurifier. Fast-forward to 2015 and we now have the iPurifier 2.


    Most effective at the end (rather than the beginning) of the 'digital USB audio chain' the iPurifier 2 cleans up the USB transmission. There is an iPurifier 2 perfectly suited to every DAC.


    All-new, cutting-edge


    In an all aircraft-grade CNC-aluminium shell anodised in 'titanium'the all-new iPurifier 2 features the very latest USB audio technology from Active Noise Cancellation® to REclock® and REgenerate®, whilst still retaining the original REbalance®.


    Active Noise Cancellation® drawn from military radar technology


    Drawing from the military field (specifically the Thales Spectra radar cancellation system deployed in the French Dassault Rafale jet fighter), iFi adapted this technology to exclusively introduce the Active Noise Cancellation® (ANC®) audio power system. It is now a cornerstone of the ever-improving iFi USB audio technology, looking for new products to feature ANC® and ANC+®.


    By generating a signal identical to the noise signal but in the exact opposite phase, it actively cancels all the incoming noise. ANC® is the perfect 'antidote' for power supply noise, the bane of USB audio.


    ANC® measured, noise drops by 100 times or 40dB in comparison to the Common Noise Filter. Sonically, the background and inner resolution to recordings is enhanced several levels.


    REclock® reclock/regenerate/repeat the signal


    Re-clocking is beneficial to audio. REclock® is a '3-in-1' feature that re-clocks/re-generates/repeats USB audio datastream. For any and every downstream DAC, REclock® technology eliminates jitter. Music flows better, is cleaner, deeper and tauter, just like the real thing.


    REbalance® rectify the unbalanced signal


    A core element of the original iPurifier's success was REbalance® which has naturally been carried over to the iPurifier 2. By removing the DC offset and 're-balancing' the USB audio signal, it is now perfectly balanced. As it purifies the USB audio data stream, this means noise is significantly reduced.


    Future-proofed. Like no other


    At iFi, we already develop cutting-edge, advanced audio converters from AMR trickle-down technology. Given this pedigree, the iPurifier 2 (just like the original iPurifier) is ready for all present and future PCM/DSD/DXD formats - without restriction.


    So your iPurifier 2 will improve your USB audio playback experience for many years to come.


    The iFi 'Grand Slam'


    To reach the absolute zenith in USB audio quality, iFi loves to push past the envelope of what is considered possible. We recommend the existing iUSB Power (to supply pure, clean power) and the Gemini cable (for separate audio + power transmission). Coupled with the iPurifier 2 to re-clock/regenerate and filter audio+power just prior to entering the iUSB Power (in this instance, not at the DAC end).


    iFi Audio
    $119.00
    USB Audio & Power Filter - 2 Types Available
    Buy Now
  • iFi Audio iSilencer3.0 iFi Audio iSilencer3.0 Quick View

    $49.00
    Buy Now
    x

    iFi Audio iSilencer3.0


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The iSilencer3.0® is an instant upgrade for all USB ports; it adds the following features to the USB ports:


    • Active Noise Cancellation® technology
    • Reduce jitter + packet errors
    • REbalance® the USB signal
    • USB3.0 technology for optimal transfer

    The iSilencer3.0® is the most direct and simple upgrade for any USB port, it lowers noise/RFI/EMI by up to 40dB or 100x.


    It is ideal for the home and on-the-go improvement of all devices connected to the USB port, e.g. Computer Servers, Mixers, Hard drives etc. Regardless of the system; from US$10,000 to US$100, the iSilencer3.0® terminates noise, in its tracks.


    Active Noise Cancellation® by AMR/iFi is in-house technology developed to cut out noise in a very significant way in the audio field. It is now the bedrock of iFi signal/power products because they need to address the issue of noise in both signal and power situations.


    What is the Active Noise Cancellation circuit design?


    Drawing from the military field (specifically the Thales Spectra radar cancellation system deployed in the French Dassault Rafale jet fighter), iFi adapted this technology to exclusively introduce the Active Noise Cancellation® (ANC®) audio power system. It is now a cornerstone of the ever-improving iFi USB audio technology, looking for new products to feature ANC® and ANC+®


    By generating a signal identical to the noise signal but in the exact opposite phase, it actively cancels all the incoming noise. ANC® is the perfect 'antidote' for power supply noise, the bane of USB audio.


    ANC® measured, noise drops by 100 times or 40dB in comparison to the Common Noise Filter. Sonically, the background and inner resolution to recordings is enhanced.


    The iSilencer3.0® can be used not only at the active USB ports but also at unused USB ports where it will reduce radiated EMI and as the ANC® circuitry is bi-directional and usually as all USB ports share one power bus. The iSilencer3.0® cuts noise, system-wide for all USB ports, including for example an active port that has another iSilencer3.0® plugged-in which is the one connected to another device.


    Multiple ANC® circuits will simply double the noise reduction each time the number of ANC® units is doubled. So 2 x iSilencer3.0® will kill double the noise of a single-one and four for example will kill four times the noise of a single one; if they are plugged into the same block of USB Ports and even though only one iSilencer3.0® has one device (e.g. DAC) connected into it.


    It is now a hallmark of all the latest iFi signal and power products to be USB3.0 standard. First USB3.0 is backwards compatible with USB2.0. Second, in terms of the specifications, USB3.0 is superior to USB2.0 e.g. the wire gauge specification is more exhaustive and the connections are better.


    Hence, the iSilencer3.0® is USB3.0 standard but also 2.0 compatible.


    iFi Audio
    $49.00
    Audio Noise Eliminator Buy Now
  • iFi Audio Ear Buddy iFi Audio Ear Buddy Quick View

    $20.00
    Buy Now
    x

    iFi Audio Ear Buddy


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Do your headphones suffer from hiss and pops or an irritating loud blast?


    You need Ear Buddy®- the hiss busting sidekick and model companion from iFi.


    Perfect for:


    • In-flight systems
    • Smartphones
    • Computers
    • A/V systems
    • High-end audio systems

    How to use: Ear Buddy® fits between your Smartphone/Digital Audio Player and your headphones. Just plug in and play.


    The Ear Buddy® gets rid of annoying hisses and buzzes and allows you to turn up your digital volume to a higher level to improve resolution and quality without making you deaf!


    With your Smartphone or DAP, normally you probably listen to music with the digital volume control set at 60%. This means you have lost 2Bits of resolution. Basically, it's like watching HD TV with some of the pixels from the screen missing. It's okay - but you are not getting what you paid for.


    You can turn it up to full volume but your ears (or the people around you) would not thank you for it. Adding the Ear Buddy® 'attenuates' or adjusts the volume and safely allows you to crank up the digital volume on your smartphone or DAP without painful consequences! This equals more music information being conveyed and gives you back those 2Bits and the full High Res music experience!


    Hiss is very annoying when listening with headphones. This is caused by the mismatch between too much power from the smartphone/DAP when used with headphones which are high sensitivity.


    The solution by IFI is to 'attenuate' or adjust the signal that cuts out the hiss and puts the enjoyment back into listening.


    iFi Audio
    $20.00
    Headphone Accessory Buy Now
  • iFi Audio DC iPurifier iFi Audio DC iPurifier Quick View

    $99.00
    Buy Now
    x

    iFi Audio DC iPurifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    With trickle-down technology from Abbingdon Music Research (AMR), the very latest product from iFi is the DC iPurifier; a noise-cancellation product aimed to enhance the existing, ubiquitous Switch Mode Power Supply (SMPS).


    Generic SMPS designs are very noisy because they were never intended for audiophile applications.


    The DC iPurifier sits in-between the SMPS and the device such as; router, DAC, set top box, media streamer, laptop or desk mixer. And with the latest Active Noise Cancellation® technology, from 5 volts all the way up to 24 volts (up to 3.5 amps) the DC iPurifier sharply reduces noise to improve the quality of the device.


    Got SMPS? Just add the DC iPurifier


    Generic Switch Mode Power Supply designs are noisy - but they were only intended for mainstream use so noise was never a consideration. Just insert the DC iPurifier between the existing noisy power supply and the source; noise is reduced by a factor of 316x to 100,000x.


    Be it home or professional audio, this is the most simple and most effective way of improving audio performance from arguably, one of the most noisy sources in a computer audio system.


    Active Noise Cancellation® derived from military radar technology


    Drawing from the military field (specifically the Thales Spectra radar cancellation system deployed in the French Dassault Rafale jet fighter), iFi adapted this technology to exclusively introduce the Active Noise Cancellation® (ANC®) audio power system.


    By generating a signal identical to the noise signal but in the exact opposite phase, it actively cancels all the incoming noise. ANC® is the perfect 'antidote' for power supply noise, the bane of all audio systems.


    Across the audible range, measured noise is improved by 316x to 100,000x or by 50dB to 100dB respectively.


    Sonically, the background and inner resolution to recordings is brought to the fore and no longer hidden. Sonics are much smoother, just like how good analogue should be. Nothing comes close.


    Ultra wide-band design, effective from 1Hz to above 5GHz


    iFi leaves no stone unturned; the DC iPurifier is a ground-up, ultra-wide band design.


    Effective from 1Hz all the way up to 5GHz. Crucially the strongest performance is in the audible range of 20Hz to 20KHz.


    Built-in polarity protection


    Red protection LED will be lit if the input polarity is reversed (If reversed polarity, please correct).


    Compatible with all power supply designs 5V-24V/3.5A/84W


    The DC iPurifier handles 5v through to 24V. Takes up to 3.5A or 84W. For different types of DC barrel connectors, the DC iPurifier works with 5.5 x 2.1mm but also ships with adapters for 5.5×2.5mm and 3.5×1.35mm. These three fittings cover the gamut of DC barrel connectors.


    Professional audio applications typically require a 'centre negative' power supply. To lower noise with the DC iPurifier, use a 'centre positive' power supply at the input and use a special white 'inverter' at the output.


    iFi Audio
    $99.00
    Power Filter Buy Now
  • iFi Audio iEMatch iFi Audio iEMatch Quick View

    $49.00
    Buy Now
    x

    iFi Audio iEMatch


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The iEMatch® solves the bane of headphone listening by removing hiss and improving dynamics. As most IEMs and headphones are too loud at even half the volume level, listening enjoyment is always curtailed. No more with the iEMatch® in the signal path.


    Use the iEMatch® when the headphones/in-ear monitor (IEM) is either too loud and/or there is excessive hiss from the music source. From Smartphones to airplane in-flight entertainment systems, powerful headphone amplifiers, the iEMatch® improves musical enjoyment by:


    1. Background noise - significantly reduced

    2. Dynamic range - more open, transparent

    3. Volume control - increased usable range


    The solution? Add the iEMatch® in-between the headphone and the amplifier. Set to high or ultra-sensitivity, sit back and enjoy the music.


    High or Ultra Sensitivity


    When listening to music, 'better dynamics' is preferable. Or more precisely, a wider 'Dynamic Range*' to allow the full openness of a recording; from the upper treble of a cymbal to the deepest bass rumble of a kettle drum to shine through.


    *Defined as the difference between the maximum usable sound level and background noise level. Usually, a higher 'dynamic range is better' as there is more music to enjoy and less noise to annoy.


    Having very sensitive (very loud) headphones means both the self-noise of the source AND the sound level is boosted. This is far from desirable. And to add insult to injury, the sound volume must be reduced to get comfortable listening levels. What is left is more noise and less dynamic range!


    With Headphones, especially those that significantly reduce background noise (IEM, noise-reducing etc) excessive levels of electronic background noise quickly become annoying, so noise should always be kept as low as possible.


    It literally defeats the object of building a system around an expensive high-resolution headphone amplifier when the volume must be backed off so much that the resulting background noise is so high, quality is reduced to below CD or MP3 audio quality.


    By using iEMatch® one can reclaim 12 or 24dB lost dynamic range; as needed to get the most enjoyment from the source; from modern high-resolution recordings down to MP3, the difference is there to be heard.


    Balanced or Single-Ended for 3.5mm


    AMR/iFi would like to use the iEMatch® to introduce its proposed new industry standard for single-ended or balanced operation. The 3.5 TRRS-Balanced headphone jack.
    There is only ONE option that makes sense, in a commonsensical context. The 3.5mm TRRS Jack is widely adopted in Smartphones and connectors, both plugs and sockets are easily available. Having 4 connections (like the 4-pin XLR), it is ideal for balanced headphones.


    Headphones may be fitted with TRRS Jack and a switch to alternate between unbalanced mode (even with microphone) for direct connection to a Smartphone and to balanced mode for use with suitably-equipped DAP/DAC/Headphone Amplifiers.


    The 'TRRS-Balanced®' system by iFi provides a way to select the TRRS plug to offer either a balanced connection or a single-ended one.
    The iEMatch® uses 3.5mm TRRS connections on both ends and is fully-balanced, so it takes full advantage of the balanced wiring in suitably-equipped headphones.


    If the attached headphone is single-ended without microphone, iEMatch® is automatically converted to unbalanced operation. For any unbalanced source with a microphone connection or any unbalanced headphone with a microphone, simply switch the TRRS-Balanced® selector to 'SE' and convert iEMatch® to unbalanced operation.


    Precision, top-notch components


    The iEMatch® is packed using premium components from 6063-TS aluminium -magnesium alloy through to the signal transfer cable which is a 6N silver copper matrix.


    The whole is even better than the sum of the parts - it just makes for the most transparent, enjoyment of music.


    Ready for travelling all over the world


    Included in the iEMatch® packgaging are; a velvet pouch, gold-plated airplane adapter and memory-foam contoured ear plugs (-37dB) for peace and quiet when travelling.
    We try to think of all scenarios.


    iFi Audio
    $49.00
    Headphone Accessory Buy Now
  • iFi Audio iDefender3.0 iFi Audio iDefender3.0 Quick View

    $49.00
    Buy Now
    x

    iFi Audio iDefender3.0


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The iDefender3.0® protects against the common problems of ground loop noise and noisy USB power:


    • Breaks noisy ground-loops. Significantly reduces system noise floor and makes for better dynamic contrast, warmth and resolution
    • Disconnects the USB Power from the PC and replaces it with a clean external power (optional iPower* 5V for ultra low noise)
    • USB3.0 port technology - most advanced and highest USB specification

    To be used directly at the Source such as the PC usb port, it breaks ground loops and cuts the noisy USB power line. From computer audiophiles, musicians, home studio artists to pro audio customers, it improves audio playback quality at home and on-the-go.


    There are more than a few products that break the USB power connection, but of the ones known to us, they do very little because the noisy ground connection remains.


    For DACs that do not use USB power (except for handshake) the iDefender3.0® breaks the ground connection eliminating earth loops, while allowing normal handshake operation to continue. So in terms of cutting out the noise, it does it in the most comprehensive way possible while at the same time, in an electrically correct way.


    As the iDefender3.0® breaks the noisy power supply, this is for DACs with an internally-powered USB line.


    But for DACs that require use USB Power, a separate 'micro port' power connection is provided for a 5V DC supply. Any 5v power supply can be used. Though we recommend the almost silent 1uV noise floor of the iPower®. It is a new-breed of near silent DC-power supply; low power consumption and low-noise.


    With 12-Element Array on the output and 6-Element Array technology on the input, there is next to no noise 'supplied' to downstream devices and 'leaked' back out to nearby components.


    It is now a hallmark of all the latest iFi signal and power products to be USB3.0 standard. First USB3.0 is backwards compatible with USB2.0. Second, in terms of the specifications, USB3.0 is superior to USB2.0 e.g. the wire gauge specification is more exhaustive and the connections are better.


    iFi Audio
    $49.00
    USB Ground Loop Eliminator Buy Now
  • iFi Audio iEMatch2.5 iFi Audio iEMatch2.5 Quick View

    $59.00
    Buy Now
    x

    iFi Audio iEMatch2.5


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Following the success of our original iEMatch®, which improves sound quality and dynamics for headphone users listening to music sourced from their smartphones, tablets or laptops, iFi is proud to announce the arrival of iEMatch2.5 for those with dedicated hi-res digital audio players (DAPs).


    Like the iEMatch®, the iEMatch2.5 significantly reduces background noise and widens dynamic range to enable headphone listeners to enjoy the full openness of a recording without having to turn the volume of their music players down to an comfortable level. Lowering the volume reduces audio quality (resolution). With the iEMatch2.5 users can up the volume on their DAP to gain back the 'bits' lost with digital volume control but still maintain a comfortable listening level.


    So, what's new with the iEMatch2.5®?


    Well, it the same principal, with one key difference. Whereas smartphones and computers tend to have unbalanced 3.5mm outputs for headphones as standard, many DAPS and headphones/IEMs at the higher end of the digital hi-fi market offer a 2.5mm balanced output as well as the choice of single-ended and/or balanced 3.5mm output ports. The iEMatch2.5® has a gold-plated 2.5mm connector for music lovers who have invested in those high-quality DAPs and expensively sensitive IEMs and/or headphones.


    What's the advantage of iEMatch2.5®?


    When listening to music, you want to hear everything from the high-pitched jingle of a tambourine to the deepest rumble of a kettledrum. In other words, you want a wide dynamic range. Having great DACs, DAPs and headphones to deliver this to your ears is all well and good but there's a problem - the sound of EVERYTHING will be boosted, including the self-noise of the source AND the sound level. Plus some higher end headphones and IEMS add to this by being sensitive themselves.


    To build a system around an expensive high-resolution headphone amplifier and then use it at a comfortable (not to mention safe) listening level means you have to turn the volume down to about 60% of its capacity and this will decrease both its dynamic range and audio quality. Basically, it's like watching HD TV with some of the pixels from the screen missing. You will also have lost around two bits of resolution.


    This is where the iEMatch2.5® comes into play. It 'attenuates' the volume and safely enables you to crank up the digital volume on your DAP without painful consequences! This equals more music information being conveyed, the best dynamic range and your missing bits back for the full high-resolution music experience! At the same time it works on that background noise, allowing little or no interference with your enjoyment.


    From modern high-resolution recordings down to MP3 files, the difference is there to be heard!


    iFi Audio
    $59.00
    Headphone Accessory Buy Now
  • iFi Audio Groundhog iFi Audio Groundhog Quick View

    $49.00
    Buy Now
    x

    iFi Audio Groundhog


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Does your audio system suffer from an annoying hum, buzz or hiss?


    When you touched your device, did the hum/buzz noise increase? Well, in most cases, this is likely to be caused by a missing Ground/Earth connection that normally shields your system from such interference and drains away the noise.


    Electrical safety and EMC Legislation require certain ways of designing AC power systems. This legislation does not consider audio systems and is mandatory. It can lead to the irritating issue of hum, buzz, hiss and general interference in certain systems where:


    • The system includes at least one AC mains powered device or has an AC mains charger attached and it has no Ground/Earth at all
    • The audio system has at least two AC mains powered devices which leads to more than one, multiple Ground/Earth connections.

    At iFi, we know how annoying unwanted noise can be. No-one enjoys a tedious listening experience.


    If you have identified that you have a Missing/No Earth, then the Groundhog is for you. Its sole objective is to put the Ground/Earth back into your system and banish those unwanted, audio pests. No predicting the weather with this hog!


    All you need to do use a standard IEC power cable to connect the Groundhog to your audio system. The Groundhog then adds back the missing Ground/Earth connection to dissipate noise.


    Our Groundhog is multi-talented as it includes a variety of connections to suit just about any audio system:


    • RCA base cable - for any audio system with an unused RCA socket.
    • USB converter - for a computer audio system. Just connect to a spare USB port.
    • Spade converter - for power supplies with a DC barrel connector.
    • 3.5mm Y-converter - for portable devices with an unused 3.5mm connection.

    As a result of connecting the Groundhog and adding back the Ground/Earth you will get increased resolution, a full-bodied mid-range, tighter bass and improved musicality and neutrality.


    To put it simply, a much richer and fulfilling listening experience. No more annoying hum, buzz or hiss


    iFi Audio
    $49.00
    Ground Loop Isolator for Audio Systems Buy Now
  • iFi Audio micro iUSB3.0 iFi Audio micro iUSB3.0 Quick View

    $429.00
    Buy Now
    x

    iFi Audio micro iUSB3.0


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Jitter Banished Forever


    Military Radar Tech For Audio


    Astonishing Noise Floor Of 0.1uV (0.0000001V)


    All Sources Of USB Gremlins 'Octa-Gone'


    The all-new micro iUSB3.0 represents the next generation of advanced computer audio technology.


    The all-new micro iUSB3.0 boasts all-original, cutting-edge USB audio technology: Active Noise Cancellation+®; REclock®; REbalance® and REgenerate® whilst still retaining and improving upon the original PowerStation® to PowerStation+® which was at the heart of the success of its predecessor.


    iFi Audio
    $429.00
    Power Filter Buy Now
  • iFi Audio SPDIF iPurifier iFi Audio SPDIF iPurifier Quick View

    $149.00
    Buy Now
    x

    iFi Audio SPDIF iPurifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The SPDIF iPurifier is partly a nod to past SPDIF devices including the Genesis Digital Lense. With the very latest AMR/iFI technology, it is suited to the gamut of SPDIF sources that are on the market today. It takes any barely recognisable 'square wave' and with REclock/REgenerate the signal is back to a real-world, perfect wave form.


    From Apple TV to Google Chromecast to PS4/Xbox to 4K Smart TVs, SPDIF is the main digital audio output. As with all mainstream products, the critical SPDIF signal transmitted is of fairly low quality. The SPDIF iPurifier runs the SPDIF signal through 4 comprehensive stages, and the result is a fully-restored, perfect SPDIF with jitter eliminated. The result is sound quality that has greater warmth, resolution and dynamic contrast.


    Restoring the Waveform and eliminates all jitter


    The signal from SPDIF devices is a digital signal. The industry standard for looking at the quality of a digital signal is to look at the 'square wave' (on an oscilloscope).


    But the wave is anything but 'square', resembling more of a jagged wave. By running through the four major stages of the SPDIF iPurifier, the Waveform is back to ideal.


    Bit-Perfect audio on all fronts


    AMR/iFi prides itself in assuring Bit-Perfect signal transfer. This means the signal remains original and unchanged. The SPDIF iPurifier ensures a Bit-Perfect transfer which is highly unusual for SPDIF devices. It can handle 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz; 16 to 24 Bit, DSD/DoP, and even Dolby Digital and DTS.
    The SPDIF iPurifier has co-axial/optical input AND co-axial/optical output. It works with just about any and every SPDIF product from mass market Apple TV to an audiophile transport > DAC.


    Galvanic isolation


    The SPDIF iPurifier has no peer. One of the key aspects is that it has galvanic isolation which uncommon. It was however found in the original Digital Lense which retailed at US$1,800 in 1996.


    Galvanic isolation is converting a signal from one form to another which will discard spurious noise. This is a major factor behind the SPDIF iPurifier's ability to stop noise contaminating the signal.


    Global Master Timing® + Memory Buffer


    AMR's Global Master Timing (GMT)/ Memory Buffer System represents a total 'out of the box' systematic digital solution that solves the digital SPDIF jitter issue once and for all. The Intelligent Memory System holds a large number of complete audio samples, so it may completely absorb a large amount of variation (jitter and drift) in the incoming signal, while still sending out data at a fixed and precise clock rate, regardless of variations in the incoming clock.


    Central to the GMT clock system is an ultra-low jitter, quartz-driven clock system (<300 femto second crystal) capable of producing millions of different frequencies with a precision of better than 0.001Hz. Hence, if the frequency shifts from 192,000.002Hz to 192,000.003Hz over a period of minutes (drift) which is the minimum to be meaningful, the GMT clock will intelligently and precisely track the change. This is a core technology of the SPDIF iPurifier.


    iPower 'quieter than battery' technology


    As the SPDIF iPurifier is powered by 5V, it is essential that it is fed by silent power supply. Hence each and every SPDIF iPurifier is shipped with its own iPower (5V). With a noise floor that of 1uV, the iPower is a breed of near silent DC-power supply. Low power consumption and low-noise.


    Packed to the brim


    With a Bill of Materials (BOM) that stands at 53 individual components, be assured that beneath its unassuming exterior, there are two separate PCBs, each mil-spec'd and packed to the brim with advanced technology.


    iFi Audio
    $149.00
    Signal Optimizer Buy Now
  • iFi Audio micro iTube2 iFi Audio micro iTube2 Quick View

    $399.00
    Buy Now
    x

    iFi Audio micro iTube2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Heart Of The iTube2


    First Time Ever To Select SET, Push-Pull or Classic


    Both Analogue Signal Processing Circuits New And Improved


    ELNA Silmics And TDK C0G Capacitors


    The original iTube became the 'go to' tube buffer for any and every home audio system. We have redesigned the micro iTube2 with new parts and new circuitry using trickle-down technology from the flagship 'Pro' series. Only the GE5670 tube remains.


    The micro iTube2 is a tubed output stage, tube preamp, tube buffer AND an impedance-matching device all in one. There is nothing like it. You can put the micro iTube2 before a solid-state preamp and another one after it, creating the effect of tubing the whole audio chain. Or you can choose to simply use the micro iTube2 as a very high-quality preamp by itself.


    The micro iTube2 sounds by and far, like a tube amplifier 'done right with the inimitable magic of tubes.' Tonality and heft, especially in the mid-range and bass frequencies are increased to elevate the whole audio chain - regardless of whether it's a $1k or $100k system. The micro iTube2 injects a serious does of tube magic into any audio system.


    iFi Audio
    $399.00
    Pre-Amplifier Buy Now
  • iFi Audio micro iPhono2 iFi Audio micro iPhono2 Quick View

    $549.00
    Buy Now
    x

    iFi Audio micro iPhono2


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Since its launch, the original iPhono became the 'benchmark' phonostage under US $1,000.


    In order to improve upon the sector-defining original iPhono, whilst keeping in essence the same design philosophy, our design team went back to the beginning and designed a ground-up, new iPhono2. The design, circuitry, the parts, the specifications and most important of all, the sonic performance meant the end justified the means.


    Ultra-wide gain from 36dB up to 72dB


    The iPhono2 allows any cartridge at any price to be accommodated optimally. The maximum gain is now an astonishing 72dB to handle the lowest of low output MC cartridges. Even the legendary Ortofon MC-5000 does not require sound-degrading step-up transformers.


    The original iPHONO already had a wonderful dynamic range of 90dB that had super-expensive phono stages looking nervously over their shoulder. Well, the iPHONO2 with its 106dB dynamic range has just pulled right out in front with something close to a 15dB bigger dynamic range than the best of the best phono stages.


    With infamous test tracks like Tchaikovsky's 1812 overture, the dynamism and wide-open sonic range is jaw-droppingly good and will take any audio system to a whole new level of enjoyment.



    Most accurate range of EQ curves


    The newly designed RIAA Equalisation circuit guarantees a +/- 0.2dB accuracy of the RIAA EQ from 20Hz - 20kHz, a reference class performance, period.


    The iPhono2 is also a perfect match for older non-RIAA LPs too. The iPhono2 retains the very popular 6 different Stereo EQ curves found in the original iPhono. So one will never have to put up with sub-optimal sound quality because of being unable to select the correct EQ curve ever again.



    Latest AMR trickle-down; Class A, TubeState®


    In the iPhono2, the Class A TubeState® has been further refined. There is an all-new Burr-Brown Soundplus® J-FET type amplifier at the heart of the new Class A, J-FET/BJT output buffer.


    This new circuit significantly reduces the loading seen by the main amplification circuit; which improves the circuit inherent linearity while allowing it to drive even punishing 600 ohm studio inputs with impunity.


    The power supply filtering has been increased 5X in value. The iPhono2 noise performance was further optimised to achieve a noise levels that approach what is feasible at room temperature. To achieve lower noise, cooling the circuit in liquid nitrogen would be needed.


    Drawing from admired AMR PH-77, the super-silent noise floor of the iPHONO2 is quite remarkable. It defies its price class to challenge money-no-object phono stages.


    The litmus test of any good phono stage design is that it is able to amplify the signal but not the noise. Hence, we advise customers to take the iPHONO2 home and to not listen to it. Why? They should lower the cartridge and turn the listening level as loud as possible. Then lift the needle again and listen for the lack of noise that just about every phono stage is affected with.


    The Signal-to-Noise ratio of the iPhono2 is 3dB quieter on MC and 10 dB quieter on MM than the original iPhono.


    More than ever, listening to vinyl, one can hear 'into' the recording itself with the blackest of backgrounds and every nuance, inflection is picked up by the system.



    DC-Infinity circuit is light-years ahead


    To guarantee an output free from DC, a 'textbook' high-end Phono Preamplifier# usual has up to 5 coupling capacitors from MC cartridge to output in addition to DC servos, all of which cause signal quality degradation.


    The original iPhono had only 2 coupling capacitors and no DC servo. In the iPhono2, with the all-new Direct-Drive Servoless 'DC Infinity' circuit, it has no capacitor AND no DC-Servo; so it adds zero noise nor distortion into the audio signal path.


    The example cited is literally from a textbook on audio circuit design - "Small Signal Audio Design" by Douglas Self.



    Reference class parts quality


    The iPhono2 employed even more Japan TDK C0G type capacitors. These are complimented by Japan Panasonic ECPU Film Capacitors explicitly designed for audio use with extremely low distortion (<0.00001% @ 1V/10kHz).


    iPhono2 also uses many more Vishay MELF type thin film resistors compared to the original. The proof is in the listening. The best just got better.


    iFi Audio
    $549.00
    Phono Amplifier Buy Now
  • iFi Audio Retro Speaker Cable iFi Audio Retro Speaker Cable Quick View

    $189.00
    Buy Now
    x

    iFi Audio Retro Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    iFi Audio Retro Speakers Cable


    iFi Audio
    $189.00
    Speaker Cable Buy Now
  • iFi Audio Retro Valve Set iFi Audio Retro Valve Set Quick View

    $219.00
    Buy Now
    x

    iFi Audio Retro Valve Set


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    iFi Audio Retro Value Set


    Full set of 4 x EL84x + 2 x ECF82


    iFi Audio
    $219.00
    Valve Set Buy Now
  • iFi Audio nano iDSD LE iFi Audio nano iDSD LE Quick View

    $139.00
    Buy Now
    x

    iFi Audio nano iDSD LE


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    MP3 Up To DSD With aplomb


    Direct-Coupled Closest To 'No Capacitor'


    Battery Or USB Powered


    DSD/PCM Remains True Native®


    The nano iDSD Light Edition (LE) is newest entry-level DAC from iFi audio. The iDSD LE has the same DNA as the multi-award winning nano iDSD but without the SPDIF output, digital filter selection and runs on DSD128/PCM384. This 'pocket rocket' comes in at the entry level with a pedigree that offers the same sonic performance as its sibling. Its scares the living daylights out of other entry level DACs and many other more expensive DACs too.


    iFi Audio
    $139.00
    Battery-powered DAC Buy Now
  • iFi Audio Mercury3.0 USB Cable 4 OPTIONS AVAILABLE iFi Audio Mercury3.0 USB Cable Quick View

    $209.00
    Buy Now
    x

    iFi Audio Mercury3.0 USB Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Mercury3.0 - the best just got upgraded.


    As we don't believe in sibling rivalry, we've given the Mercury single run cable the same treatment as the Gemini to create the new Mercury3.0.


    With generic mass-produced USB cables, the data and power cables are normally packed together. This means that they do not conduct as well as they should and they are not sufficiently shielded from each other. This has a negative impact on USB signal integrity and degrades sound quality.


    The Mercury3.0 breaks the mould.


    The Mercury has quadruple shielding to fully separate and protect the delicate USB data signal from the USB power.


    It employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer. The construction is a custom minimum inductance parallel type with quadruple shields - this protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible.


    With custom machined FINAL connectors and an even better RF3 filter design, sonically, the iFi Mercury3.0 USB computer audio cable sets a whole standard for USB3.0 and USB2.0.


    Need for speed


    USB3.0 is vastly superior to USB2.0 at handling high-data volumes.


    The USB3.0 platform mandates better connectors and higher quality cables - the new Mercury3.0 meets these needs with ease. This much higher standard transmission platform means USB audio passes with the least disturbance. It is akin to driving on a newly paved highway compared to one with potholes. The former enables faster, smoother and less-jittery audio & power transfer. The sonic benefits are proof for all to hear.


    As audio transmission standards improve, the Gemini3.0 with its USB ultra-speed bandwidth of 5.0Gbps, is also future-proofed.


    Shielded to the max


    With quadruple shielding, the Mercury3.0 protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible for the USB signal.
    This means sound quality is not compromised as with many 'off the shelf' versions where inadequate shielding is commonplace.


    Exceptional from beginning to end


    In the Gemini3.0 the signal runs through the cable and the connector. This means the connector too must be exceptional.


    Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link, so noise will radiate out. Durability is also compromised as very few make their own connectors.


    The FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium. Plus gold-plated connections make for years of steadfast service.


    The power of RF3


    Most standard USB cables do not address RF issues. Most 'off the shelf ' versions that are fitted with filters work over too narrow a range. And even then, this is only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.


    The Mercury3.0 is fitted with three custom-made metal oxide ceramic RF noise silencers. Each has a different effective range so that they greatly broaden the range over which RF noise is silenced. Furthermore, the middle silencer is adjustable and can be moved along the whole length of the cable. This then "detunes" the antennae formed by the cable, depending on the conditions and requirements in the system. The other 2 silencers should be kept as close to each respective end as possible.


    A match made in USB heaven


    Where the Gemini3.0 cannot be used eg a tablet with only ONE USB port, the Mercury3.0 is a perfect match for the iGalvanic3.0 and the micro/nano USB3.0.
    The iGalvanic3.0 fully galvanically isolates the USB3.0/2.0 signal and power.


    The micro/nano USB3.0 both boast a Super Regulator, not only with super low-noise (0.1uV/0.5uV) but also with super low output impedance (around 0.00015 Ohm at 1KHz, as low as 0.00003 Ohm at 100Hz to DC) to maximise the total USB connection.


    iFi Audio
    $209.00
    USB Cable - 4 Options Available
    Buy Now
  • iFi Audio Retro LS3.5 Speakers iFi Audio Retro LS3.5 Speakers Quick View

    $809.00
    Buy Now
    x

    iFi Audio Retro LS3.5 Speakers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Treble That Is Literally, Smooth As Silk


    Mid-Range And Bass That Leaves The Listener In Awe


    The Open Cell Structure Is Unmatched For Sound Absorption


    As Close To "No Post" As It Gets


    The LS3.5 is iFi's 3.0 reboot of the classic BBS LS3/5A which is still now, half a century after its launch still in high demand and revered. iFi has taken the design back to its basic underpinnings and then re-engineered the LS3.5 ground-up for the 21st century. From designing the drivers (not OEM) to the cabinet terminals, where we were dissatisfied, we manufactured our own. This is the iFi level of attention to detail.


    The Retro LS3.5 is in many ways a synthesis of the best of the BBC LS3/5A and dash of the Le Petite. We eliminated their respective drawbacks using the very latest technological advancements available. So think of the iFi LS3/5A as BBC LS3/5a+Le Petite with an injection of factor X.


    iFi's brand-new tweeter that is smooth as silk, literally


    Silk is smooth, so why not make a tweeter from the ground-up using it at the core? The iFi 28mm tweeter is horn-loaded and uses a neodymium magnet. It is very much a 21st century product - that is, at the advanced edge of tweeter technology. The silk dome combines the lack of resonances at the top of the operating range (as found on metal domes) with excellent dynamics in band. The small neodymium magnet structure shifts cavity resonances outside the audible range. Being horn-loaded, it matches perfectly with the wideband driver to create a mammoth sound field.


    The tweeter is used only at the very top end of the audible range; the whole range from 59Hz - 8kHz covering the fundamentals of all instruments except those with very low bass notes and all the formants (the tone forming harmonics of instruments) is covered by the wideband driver, without any electrical or mechanical crossover.


    This avoids any damage to the phase/impulse response for this critical range. The simple arrangement of the crossover for the tweeter (first order at appx. 10kHz acoustic crossover) and the tweeters waveguide, which insets it for time-alignment with the wideband driver further preserves phase/impulse response.


    Ground-up paper cone wideband driver


    Natural material for a natural sound. The paper cone 115mm wideband driver by iFi performs more akin to a full-range driver.


    In many ways the wideband driver is very traditional, both magnet and basket. Stamped steel baskets can dissipate energy much faster than cast ones. It harks back to the "golden era" of driver design in the 1970's. Modern finite element modeling and modern materials have improved the driver in many areas (especially efficiency and bandwidth) over classics like the KEF B-110 which was originally used in the LS3/5A.


    The wideband driver rolls off after 8kHz. And it reaches down to 59Hz (with correct placement).


    Time-Aligned to perfection


    The iFi LS3.5 has a coherency that is based upon the simple fact from the outset, the tweeter and driver are perfectly time-aligned. Simply put, this means if one was looking at a cross-section of the LS3.5, the acoustic centre of the tweeter and the wideband driver as precisely vertically-aligned. This means sound waves from both units arrive at ear of the listener at the same time (as opposed to at different times). This is an oft overlooked weakness of many speakers, but not in the iFi LS3.5.


    Multi-chamber Voigt design with tuned enclosure


    There are two-chambers in one. The enclosure is maybe best considered a variant of multiple reflex, also, by breaking up the larger volume into two smaller different volume/size sections resonance frequencies are spread and tuned to higher frequencies, where the Amino-plastic open cell foam we use for damping has optimal absorption.


    The Acoustic Active Tuning with minimal damping drawn from the musical instrument manufacturing sector further assists with dissipating resonance frequencies higher - just think of the LS3.5 as a musical instrument.


    This is why the LS3.5 is a speaker that makes music.


    Bamboo is best


    Bamboo is a grass - hence it is a sustainable material and exceptionally environmentally friendly. It is 2x lighter and 3x stronger than wood. The aforementioned Voigt design coupled with the "stiff as steel" bamboo enclosure and the extra reinforcement by the division plus the acoustic tuning - all combined, makes for a remarkably low sonic signature of the box. This is critical as the use of the single paper driver needed for the wide bandwidth cannot be counted upon to block resonances from inside the box passing through the way a heavy and slower plastic cone is able to.


    Hence for environmental and sonic reasons, it made perfect sense to use it as a speaker cabinet material. The LS3.5 is 5x more costly to manufacture than standard MDF cabinets. A simple knuckle tap shows its complete lack of colouration - which is easily audible from the first note.


    Advanced Amino-plastic open cell foam


    For the very minimal internal damping duties, we scoured the world for the most advanced acoustic materials and settled on the Advanced Amino-plastic open cell foam material. The open-cell surface guarantees that sound waves are not reflected as an echo but can penetrate the cell structure unhindered. The sound energy is reduced in the cell structure, giving an excellent sound absorption capacity.


    From our listening tests the ability to ensure the deepest and cleanest bass along with a mid-range that is spell-binding placed it heads and shoulders above all others.


    Despite its much higher cost, we just had to have it in the LS3.5.


    Binding posts that carry the signal unhindered


    Leaving no stone unturned, we sourced a binding post that had the purest copper count, had the maximum surface area contact and had to be gold-plated for long-term enjoyment. Rest assured that even the banana speaker connectors we developed from the ground-up!


    The silver-plated copper speaker cables and the gold-plated copper speaker connectors means the sound quality is simply unbeatable and means the LS3/5A can play with the "big boys".


    iFi Audio
    $809.00
    Speakers (Pair) Buy Now
  • iFi Audio Mercury USB Cable 2 LENGTHS AVAILABLE iFi Audio Mercury USB Cable Quick View

    $119.00
    Buy Now
    x

    iFi Audio Mercury USB Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The iFi Mercury USB cable is the single-run brethren of the highly-regarded Gemini USB cable. The Mercury USB cable takes the standard USB transmission standard and re-writes it for high-end audio. Crucially, the special geometry adheres to the 90 ohm impedance specification better than even the USB 2.0 standard. Resistance is 3x lower than textbook. The Final USB machined connectors are proprietary for exceptional shielding and rigidity. The atypical RF3filter design is user-adjustable. With all these technological breakthroughs, one audition and there is no going back.


    A simple, yet effective illustration is the graph below. The Mercury (along with the Gemini) cable adheres to the 90ohm specification of the USB transmission protocol exhibiting just a 1% deviation from the 90ohm impedance end-to-end (ie. connector + cable together).


    Other expensive audiophile cables by comparison, vary as much as 15% (or 78ohm-103ohm!) This one key parameter is often overlooked yet is essential to maximise the quality of the signal transfer.


    The Mercury USB cable. It really is mercurial.


    The signal runs through the cable and connector. Therefore, the connector must be as exceptional as the cable. Most USB Cables use moulded plastic covered connections. Plastic cannot shield the high frequencies present in the USB Data link, so noise will radiate out. Durability is also compromised. The FINAL USB connectors provides impeccable end-to-end RF shielding, being machined entirely from solid aluminium. Gold-plated connections make for years of steadfast service.


    iFi's proprietary machine connector looks and feels like it was hewn from a solid block of aluminium. This is not far from the truth. This is the iFi standard.


    Addressing RF issues is usually non-existent in USB cables. Even those with filters fitted, they are off the shelf and as such, work only over too narrow a range. Also, too few are fitted and common RFI filtering is placed at the ends of the cables, leaving the whole length of the cable to act as effective antennae.


    The Gemini cable is fitted with three custom-made metal oxide ceramic RF noise silencers. Each with different effective ranges; thus they greatly broaden the range over which RF noise is silenced. Further the middle silencer is design to be adjustable (moved along the whole length), to "detune" the antennae formed by the cable, depending on the conditions and requirements in the system. The other 2 silencers which are not affixed, should be kept as close to each respective end as possible.


    The Mercury USB cable design is a complete and full solution that has left nothing to chance. It has a number of special attributes that enhance shielding, conductors and insulation that is quite simply, revolutionary.


    iFi Audio
    $119.00
    USB Cable - 2 Lengths Available
    Buy Now
  • iFi Audio iPower DC Power Supply 4 VERSIONS AVAILABLE iFi Audio iPower DC Power Supply Quick View

    $49.00
    Buy Now
    x

    iFi Audio iPower DC Power Supply


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The central characteristic of iFi is in pursuit of the zenith in audio performance: it leaves no stone unturned. Well, the all new iPOWER is an exemplary example of this. Despite the fact that the iFi Ultra-Low Noise AC/DC adapter was exceptionally quiet and elevated the iUSB and iPhono to punch way beyond their respective categories, the all new iPower is even quieter, up to 10x quieter in fact.


    What is it? Brand new audiophile-standard DC-power supply: In 5V, 9V, 12V and even 15V versions.


    Which products is it aimed at? Virtually any DC powered device. Just check the correct voltage (5V/9V/12V/15V). Check the correct polarity setup. Ensure the current output is sufficient, then plug in and enjoy.


    Three years ago, iFi's Ultra-Low Noise AC/DC power adapter set the way and underpinned the whole iFi range from the iUSB to the iPhono leading to their loyal following.


    Well, not to rest on its laurels, iFi now has a completely new 'ground-up' DC powered supply.


    Drawing from the military field (specifically the Thales Spectra radar cancellation system deployed in the French Dassault Rafale jet fighter), iFi adapted this technology to exclusively introduce the Active Noise Cancellation+ ® (ANC+®) audio power system. It is so good ANC technology is now a cornerstone of the ever-improving iFi USB audio technology range.


    By generating a signal identical to the noise signal but in the exact opposite phase, it actively cancels all the incoming noise. ANC+® is the perfect 'antidote' for power supply noise, the bane of USB audio.


    With ANC+® the power line is filtered for audio band and RF noise. The measured noise floor of 1uV (0.000001V) is at the measurement limit of what even the most sophisticated Audio Precision equipment is capable of.


    Measured on the Audio Precision 2, the iPower has an astonishingly low audio band noise floor of just 1uV! To put this into context, iFi's very own Ultra-Low Noise AC/DC adapter was in a class of its own at 10uV. Compared to a typical audiophile Linear Power Supply which measured at 20uV, it is demonstrably clear AMR/iFi power supply technology is unparalleled.


    Shaping the face of technology, AMR/iFi not only pushes the boundaries of audio design, but power design too. After all, electricity is the 'fuel' behind the audio signal.
    There are two separate, but similar 'Array Technologies' in the iPOWER:


    • 12-Element Output Array - is for addressing noise on the output (at the DC barrel) end.
    • 6-Element Input Array - is for dealing with noise at the input (at the 2-pin mains) end.

    What this means is that any noise is contained and neutralized with the iPOWER to halt it from contaminating the local mains or audio system. iFi is one of a handful of companies that manufacture 'battery quiet' DC power supplies. Just like hybrid technology in cars, both have come a long way in a short space of time and are gaining wider acceptance.


    At iFi, we like to think comprehensively and while the majority of home and pro audio products have a 'centre positive' DC power connector type, if your product such as a guitar pedal or a Sony Discman has a 'centre negative' instead of 'centre positive' pin, it is important to use the iFi power inverter. If you are unsure of the DC polarity of your product, please check with your vendor. For equipment using a DC power connection, it is common practice to include protection circuitry against over-voltage/reverse polarity, but not every manufacturer will have applied this. Always check first as AMR/iFi is not responsible for incorrect use or damage arising from use of the iPower.


    AMR/iFi understands and appreciates that today, being portable and user-friendly is paramount. So the iPower is light, convenient and above all, easy to travel with and work in any country in the world. It comes in 5V, 9V ,12V and 15V versions for all manners of DC powered devices and a set of interchangeable pins to span the globe: for USA/UK/EU/AUS electrical outlets. Performance and portability personified.


    In summary, all the technology behind the iPower would count for little if it was not audible. Well, it is both. With the all-new iPower, the noise floor is virtually inaudible and the all-important level of refinement (whether listening to an analogue or digital source) has been amplified several notches.


    Best of all, all existing iFi-powered devices all benefit, and in the different DC-power versions, the iPower now compliments non-iFi DC-powered products too. So all can enjoy the "sound of iFi."


    The USB power line runs on 5v and the Raspberry Pi/Cubox/BeagleBone (or similar Microcomputer) is rapidly becoming the most popular computer server option. So, each iPOWER (5v version ONLY) ships with the DC > micro USB cable so that the iPOWER (5v) can supply pure, clean power to the microcomputer for the optimal computer audio playback.


    iFi Audio
    $49.00
    DC Power Supply - 4 Versions Available
    Buy Now
  • 1
  • 2
Go to top