Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - LP10
Home > Products for: '

Integrated Tube Amps

'
  • 1
Results per page:
  • Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Cayin A-50T Tube Integrated Amplifier (with Phono Stage) Quick View

    $1,800.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier (with Phono Stage)

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Includes Phono Stage


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,800.00
    Cayin A-50T Tube Integrated Amp with Phono Stage Buy Now
  • Decco65 Integrated Amplifier (High Gloss Black) Decco65 Integrated Amplifier (High Gloss Black) Quick View

    $899.00
    Buy Now
    x

    Decco65 Integrated Amplifier (High Gloss Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Simplicity = Performance

    The only thing left to add to the decco65 is your computer or streamer and speakers. Simple and elegant for the way you listen. The decco65 has the inputs you really need for sources you use. Few are "analog" today, yet most integrated amplifiers on the market support analog only. The decco65 was designed to enhance any digital source, from mp3 to full 24/192 on your computer to the Apple TV, Sonos, music servers, internet radio or whatever source you choose.


    The Reasons It Sounds So Good


    • The ESS Sabre Digital to Analog Converter is widely recognized as the world's best DAC when dealing with hostile digital components like computers and streamers.

    • The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • Galvanic Isolation Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs.

    • The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio.

    • The Amplifier uses the same technology found in very expensive premium amplifiers.

    • The Headphone Amp switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high resolution music.



    Digital to Analog Converter

    The ESS Sabre Digital to Analog Converter is widely recognized as the worlds best DAC when dealing with hostile digital components like computers and streamers. Jitter is all but eliminated leaving a beautiful digital canvas as a base. The art of this DAC comes in with the hundreds of additional parts and multiple power supplies designed around the ESS chip that work in unison to produce the Peachtree sonic signature.


    Real-world Performance

    The 24/192 Asynchronous USB Input provides the best possible processing from this port and furthers the efforts of the ESS Sabre DAC. Asynchronous communication allows a high precision clock inside the decco65 to control the timing of the bitstream from the computer to the DAC. USB implementation is one of the more difficult tasks in the real world of computer audio.


    Galvanic Isolation

    Typically reserved for more expensive DAC circuits, galvanic isolation prevents electrical noise from entering the DAC board on all grounded digital inputs. Any contamination due to the switching power supply, multiple ground points, and high speed processing is isolated from the DAC so nothing but pure 1s and 0s reach the DAC circuit.
    The Tube Buffer uses a stereo triode 6N1P to smooth the harsh digital edge found in poor recordings and compressed audio. It can be switched on or off from the remote control to match your preference at any given time. We find it especially good for Pandora, MOG, Spotify and most cloud-based listening.


    Beautifully Amplified

    The Amplifier section of the decco65 uses the same technology found in very expensive premium amplifiers. This high performance Class D design has the ability to drive 65 watts per channel into 8 and 95 watts per channel into 4 with a very natural sound. The decco65 has the sonic signature of a great A/B amp with the power efficiency of Class D. Its combination of low distortion, high bandwidth, and energy efficiency makes it the ideal partner to the decco65 digital front end and hybrid tube preamp.


    Just You and Your Music

    The Headphone Amp in the decco65 switches the speakers off when your headphones are inserted, so even when a quiet environment is required, you can still fill your head with lush high-resolution music. The headphone output runs through the tube stage so you can enjoy that smooth tube sound in solitude.


    Peachtree Audio
    $899.00
    Decco65 Integrated Amplifier Buy Now
  • Cayin A-50T Tube Integrated Amplifier Cayin A-50T Tube Integrated Amplifier Quick View

    $1,600.00
    Buy Now
    x

    Cayin A-50T Tube Integrated Amplifier

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B


    The Cayin Audio A-50T uses four EL34s for Class A/B1 P.P amplification. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,600.00
    Cayin A-50T Tube Integrated Amp Buy Now
  • VPI 299D Integrated Amplifier (Open Box) VPI 299D Integrated Amplifier (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    VPI 299D Integrated Amplifier (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    Demo Discounts
    $2,999.00
    VPI 299D Integrated Amplifier (Open Box) Buy Now
  • Rogers EHF-200 Amplifier Rogers EHF-200 Amplifier Quick View

    $12,900.00
    Buy Now
    x

    Rogers EHF-200 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Hand-built, these Class A vacuum tube amplifiers are designed to give audio enthusiasts the ultimate listening experience now equipped with KT150 Power Tubes Never before has music sounded so good coming out of your speakers. Clarity rules with the EHF-200.


    Trust us. Turn them on and you'll be blown away by their concert hall quality. There may be other tube amps on the market, but nothing compares to the power and precision of these amps. The sound is stunning and so is the look. All you have to do is close your eyes and immerse yourself in the music.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $12,900.00
    Integrated Amplifier Buy Now
  • Elan 35 Speakers - Black Elan 35 Speakers - Black Quick View

    $2,399.99
    Buy Now
    x

    Elan 35 Speakers - Black


    Have a question about this product? Please email our href=mailto:audioadvisor@soundstagedirect.com>audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Elan 35 is the largest floor-stand speaker in this new range. Its design holds true to the purist principles followed by Epos. The two woofers work together at low frequencies to provide even higher sensitivity and power handling than the bookshelf models - in addition to delivering deeper and more powerful bass. We believe this design philosophy delivers the very best sound quality and musical performance for the money.


    Design

    Only the finest real-wood veneers are selected, book-matched and hand-laid. Several coats of polyurethane are applied and polished for a high-quality finish. To minimise unwanted vibration and coloration, extensive horizontal and vertical internal bracing are positioned inside the sturdy 18mm thick MDF cabinets. For optimum performance and stability, they should be fitted with the plinths supplied, together with the adjustable spiked feet, designed to decouple unwanted energy from the cabinet into the floor.


    Elan 35 is supplied with two baffles. The standard audiophile baffle with no visible fixing screws is fitted. If required, this can easily be swapped for the alternative cloth covered version, which is designed with the same profile as the naked baffle. Both types of baffle fit snugly around the tweeter and are both gently contoured around the woofers. So, unlike a conventional grille frame, there are no obstructions or sharp edges to cause reflections and sound colorations. The sound from both types of baffle will therefore sound similar.


    Tweeter

    Epos has developed a new soft-dome tweeter for the Epic and Elan range. By using virtual-performance CAD simulation tools, this new tweeter has been designed to achieve the accuracy and speed of a metal dome but with smoothness associated with a soft dome. It has a low resonance frequency, high sensitivity and extended high frequency response. With its 25mm (one inch) doped-fabric dome, short horn, high-temperature Ferro-fluid cooled voice-coil and shielded neodymium magnet, it is capable of high output levels for extended periods. Its natural high sensitivity is necessary to match the much increased output from the new bass and mid-range drivers.


    Mid-Bass

    A new long-throw eight-Ohm 187mm bass/mid driver has been developed for the Elan 35. Built on to an open-frame cast-aluminium alloy chassis, with a generously ventilated spider and vented magnet pole, this driver minimises colorations and distortions while allowing greater sound pressure levels than earlier Epos drivers.


    The bass/mid units feature a high-quality polypropylene cone and 'bullet'-shaped dust cap. These form a stiff yet pliable, well-damped structure which retains its shape, even at high power. This helps the woofers to produce a dynamic sound, with a very even frequency response and naturally smooth roll-off. The lower woofer is rolled-off by the crossover (filtered) so that it only plays bass, allowing the top mid-woofer to play bass and mid-range smoothly. The mid-woofer is rolled-off (filtered) at higher frequencies by the crossover to integrate properly with the tweeter. This is essentially a true 2 ½ way configuration.


    Both woofers are loaded by a very large diameter port, flared at both ends, to reduce turbulence. Together they produce plenty of clean deep bass coupled with a clear, smooth and detailed mid-range. In some rooms, or in placing them close to a wall or corner of a room, this may be too much, so we have supplied a custom foam bung to fit inside the entrance to the port to restrict the airflow and roll-off the bass earlier.


    A special feature of this floor-standing speaker is its high sensitive, making it suitable for use with a wide range of amplifiers, from as small as 10 watts to as large as 200 watts into 4 Ohms. So, tube fans should find this amp a perfect match.


    Crossover

    In typical Epos fashion, the Elan 35 crossover is as simple as we can make it: both the woofer and tweeter networks are 2nd order filters at 800Hz and 3.2kHz. To ensure the highest sound quality, all the resistors are metal oxide, all the capacitors are high-quality polypropylene-foil dielectric types and internal wiring uses proprietary solid-core wire covered in a sponge sheath to prevent vibration. Inductors are designed for low distortion even at high powers: air-core for the tweeter and an over-sized laminated-iron core for the woofer. All connections to drive units and crossover are hand soldered. The input terminals are bi-wirable, using a proprietary metal terminal panel with solid metal binding post equipped for 4mm plus and large spade lugs.


    Detail

    We paid great attention to every single minute detail during the design of the Elan 35, to give customers the best sound at the best price. It comes as no surprise that this elegant speaker will have you in awe from the first note. In addition to the astonishing bass power, detail and depth, sound stage, depth and detail are truly exceptional, with a clarity that outshines the competition and many higher priced speakers.


    This is a truly eye and ear-opening loudspeaker that will keep you enthralled listening to your favorite tracks for many years to come.


    This product is not eligible for discount.


    Epos Speakers
    $2,399.99
    Elan 35 3-Way Floor-Standing Speakers - Black Buy Now
  • Rogers EHF-100 Amplifier Rogers EHF-100 Amplifier Quick View

    $8,000.00
    Buy Now
    x

    Rogers EHF-100 Amplifier

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Never before has music sounded so good coming out of your speakers. Clarity rules with the EHF-100 and EHF-200. Trust us. Turn them on and youll be blown away by their concert hall quality. There may be other tube amps on the market, but nothing compares to the power and precision of these amps. The sound is stunning and so is the look. All you have to do is close your eyes and immerse yourself in the music.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $8,000.00
    Integrated Amplifier Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Audioengine P4 Speakers (Bamboo) Audioengine P4 Speakers (Bamboo) Quick View

    $325.00
    Buy Now
    x

    Audioengine P4 Speakers (Bamboo)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $325.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Bamboo) Buy Now
  • Audioengine P4 Speakers (Satin Black) Audioengine P4 Speakers (Satin Black) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Satin Black)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Satin Black) Buy Now
  • Audioengine P4 Speakers (Hi-Gloss White) Audioengine P4 Speakers (Hi-Gloss White) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Hi-Gloss White) Buy Now
  • Audioengine HDP6 Speakers 3 COLORS AVAILABLE Audioengine HDP6 Speakers Quick View

    $499.00
    Buy Now
    x

    Audioengine HDP6 Speakers



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $499.00
    Passive Bookshelf Speakers (Pair) - 3 Colors Available
    Buy Now
  • 1
Go to top