Pro-ject Authorized & Certified VPI Dealer

VINYL. OUR WAY OF LIFE SINCE 2004

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Jmw

'
  • 1
  • 2
Results per page:
  • JMW - XLR Junction Box (Reference Wiring) JMW - XLR Junction Box (Reference Wiring) Quick View

    $400.00
    Buy Now
    x

    JMW - XLR Junction Box (Reference Wiring)

    VPI


    Replacement Junction Box for VPI Turntables! Allows use with balanced XLR inputs of your phono stage.


    Dimensions: 2 1/4 x 1 1/2 x 1 1/2

    VPI
    $400.00
    JMW - XLR Junction Box (Reference Wiring) Buy Now
  • Armtube For JMW-12.7 Armtube For JMW-12.7 Quick View

    $1,700.00
    Buy Now
    x

    Armtube For JMW-12.7










    Have more than one cartridge and a JMW 12.7 tonearm? Get an extra armtube and enjoy the benefits of multiple cartridges today! Easy to switch, just remove the old armwand and replace with the new one. That simple! You can switch cartridges in less than 30 seconds! 



    VPI JMW 12.7 Armwand Features: 

    • Nordost Valhalla Internal Wiring 



    VPI JMW 12.7 Armwand Includes: 

    • ArmTube

    • Counterweight 

    • Anti-Skate Ring





     



    VPI Accessories
    $1,700.00
    Armtube For JMW-12.7 Buy Now
  • JMW-10 Tonearm JMW-10 Tonearm Quick View

    $1,000.00
    Buy Now
    x

    JMW-10 Tonearm


    Pivot to spindle distance: 258mm

    Effective length: 273.42mm

    Effective mass: 11g

    Overhang: 15.42mm

    Offset angle: 19.98 degrees

    Average RMS distortion: .311%

    Armtube critically damped internally with 1.7 pound foam.

    Premium Discovery wire used internally, optional Nordost Reference wire.

    Unipivot design with zero friction and zero bearing chatter.

    Dropped counterweight for tracking force and azimuth adjustment and low center of gravity.

    Adjustable anti-skate settings if needed.



    VPI Accessories
    $1,000.00
    Tonearm Buy Now
  • VPI 3D Tonearm - 10 (With VTA Base) VPI 3D Tonearm - 10 (With VTA Base) Quick View

    $3,000.00
    Buy Now
    x

    VPI 3D Tonearm - 10 (With VTA Base)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    10 3D Printed Tonearm with stand


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $3,000.00
    3D Complete Tonearm - 10 (With VTA Base) Buy Now
  • VPI JMW-9 Tonearm VPI JMW-9 Tonearm Quick View

    $1,000.00
    Buy Now
    x

    VPI JMW-9 Tonearm


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    JMW-9 (223-MM) tonearm


    VPI Accessories
    $1,000.00
    JMW-9 Tonearm Buy Now
  • JMW Tonearm Damping Fluid JMW Tonearm Damping Fluid Quick View

    $20.00
    Buy Now
    x

    JMW Tonearm Damping Fluid

    VPI


    The VPI JMW Tonearm Damping Fluid for all VPI JMW Style tonearms with fluid damping cups.

    VPI Accessories
    $20.00
    JMW Tonearm Damping Fluid Buy Now
  • VPI JMW Dropped Counterweight 6 WEIGHTS AVAILABLE VPI JMW Dropped Counterweight Quick View

    $90.00
    Buy Now
    x

    VPI JMW Dropped Counterweight

    Counterweight for VPI JMW tonearms.
    VPI Accessories
    $90.00
    Turntable Accessory
    Buy Now
  • JMW Alignment Jig 9 JMW Alignment Jig 9 Quick View

    $60.00
    Buy Now
    x

    JMW Alignment Jig 9

    VPI


    9


    The VPI Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The VPI Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang.

    VPI Accessories
    $60.00
    JMW - Alignment Jig 9 Buy Now
  • JMW Alignment Jig 10 JMW Alignment Jig 10 Quick View

    $60.00
    Buy Now
    x

    JMW Alignment Jig 10

    VPI


    10


    The VPI Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The VPI Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang.

    VPI Accessories
    $60.00
    JMW - Alignment Jig 10 Buy Now
  • JMW Alignment Jig 12 JMW Alignment Jig 12 Quick View

    $60.00
    Buy Now
    x

    JMW Alignment Jig 12

    VPI


    12


    The VPI Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The VPI Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang.

    VPI Accessories
    $60.00
    JMW - Alignment Jig 12 Buy Now
  • JMW - Classic 1 Arm JMW - Classic 1 Arm Quick View

    $1,599.99
    Buy Now
    x

    JMW - Classic 1 Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.



    VPI Accessories
    $1,599.99
    JMW - Classic 1 Arm Buy Now
  • JMW - Classic 2 Arm JMW - Classic 2 Arm Quick View

    $2,399.99
    Buy Now
    x

    JMW - Classic 2 Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.


    VPI Accessories
    $2,399.99
    JMW - Classic 2 Arm Buy Now
  • JMW - Classic Signature Arm JMW - Classic Signature Arm Quick View

    $2,599.99
    Buy Now
    x

    JMW - Classic Signature Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.


    VPI Accessories
    $2,599.99
    JMW - Classic Signature Arm Buy Now
  • JMW - XLR Junction Box JMW - XLR Junction Box Quick View

    $300.00
    Buy Now
    x

    JMW - XLR Junction Box

    VPI


    Replacement Junction Box for VPI Turntables! Allows use with balanced XLR inputs of your phono stage.


    Dimensions: 2 1/4 x 1 1/2 x 1 1/2

    VPI
    $300.00
    JMW - XLR Junction Box Buy Now
  • VPI Dual Pivot Assembly for JMW Tonearms VPI Dual Pivot Assembly for JMW Tonearms Quick View

    $149.99
    Buy Now
    x

    VPI Dual Pivot Assembly for JMW Tonearms

    VPI


    The VPI Dual Pivot Assembly for JMW Tonearms is compatible with both 3D and metal JMW tonearms using VPI's on-the-fly VTA base.

    VPI Accessories
    $149.99
    Dual Pivot Assembly Buy Now
  • JMW - Junction Box - RCA JMW - Junction Box - RCA Quick View

    $200.00
    Buy Now
    x

    JMW - Junction Box - RCA

    VPI


    Replacement Junction Box for VPI Turntables! Allows use with balanced XLR inputs of your phono stage.


    Dimensions: 2 1/4 x 1 1/2 x 1 1/2


    VPI Accessories
    $200.00
    JMW - RCA Junction Box Buy Now
  • JMW - Junction Box - RCA (Reference Wiring) JMW - Junction Box - RCA (Reference Wiring) Quick View

    $300.00
    Buy Now
    x

    JMW - Junction Box - RCA (Reference Wiring)

    VPI


    Replacement Junction Box for VPI Turntables! Allows use with balanced XLR inputs of your phono stage.


    Dimensions: 2 1/4 x 1 1/2 x 1 1/2

    VPI Accessories
    $300.00
    JMW - RCA Junction Box (Reference Wiring) Buy Now
  • VPI VTA Base On The Fly For JMW 10 Tonearm VPI VTA Base On The Fly For JMW 10 Tonearm Quick View

    $1,200.00
    Buy Now
    x

    VPI VTA Base On The Fly For JMW 10 Tonearm

    VPI


    VPA Base On The Fly for JMW 10 Tonearm. Works with all current VPI models. Does not work with VPI Traveller.

    VPI Accessories
    $1,200.00
    Base Buy Now
  • VPI JMW-9-3D Tonearm VPI JMW-9-3D Tonearm Quick View

    $1,799.00
    Buy Now
    x

    VPI JMW-9-3D Tonearm


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    JMW-9-3D tonearm


    VPI Accessories
    $1,799.00
    JMW-9-3D Tonearm Buy Now
  • Anti-Skate Device - JMW-12 Anti-Skate Device - JMW-12 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-12



    For use with JMW-12


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.




    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-12 Buy Now
  • Anti-Skate Device - JMW-9 Anti-Skate Device - JMW-9 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-9



    For use with JMW-9


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.



    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-9 Buy Now
  • Anti-Skate Device - JMW-10 Anti-Skate Device - JMW-10 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-10



    For use with JMW-10


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.



    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-10 Buy Now
  • 3 Gram Stainless Steel Headshell Weight 3 Gram Stainless Steel Headshell Weight Quick View

    $15.00
    Buy Now
    x

    3 Gram Stainless Steel Headshell Weight

    VPI


    The VPI Headshell Weight, designed for use with VPI JMW tonearms, allows lighter cartridges to be used on heavy tonearms, such as the 10 and longer JMW tonearms.

    VPI Accessories
    $15.00
    3 Gram Stainless Steel Headshell Weight Buy Now
  • VPI 3D Tonearm - 12 (With VTA Base) VPI 3D Tonearm - 12 (With VTA Base) Quick View

    $4,200.00
    Buy Now
    x

    VPI 3D Tonearm - 12 (With VTA Base)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    12 3D Printed Tonearm


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $4,200.00
    3D Complete Tonearm - 12 (With VTA Base) Buy Now
  • 1
  • 2
Go to top