Pro-ject Authorized & Certified VPI Dealer

VINYL. OUR WAY OF LIFE SINCE 2004

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Phono

'
Results per page:
  • Manley Chinook Phono Stage Manley Chinook Phono Stage Quick View

    $2,400.00
    Buy Now
    x

    Manley Chinook Phono Stage

    2012 2012 Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Beautiful build quality


    Audiophile componentry


    Handcrafted in the USA


    Flexible cartridge loading options


    Angling for an affordable yet world-class vacuum tube phono stage? The hunt is over! The spawn of the Manley Steelhead - one of the world's greatest phono preamplifiers - Stereophile Class A Recommended Component and The Absolute Sound's Preamp of the Year, has arrived. The Chinook epitomizes the sound of the Steelhead. Designed for the music lover, not the switch tweaker.


    Like the Steelhead, each channel employs the two triode sections of a 6922 for amplifying duties with highly accurate passive RIAA equalization networks. In the Chinook, the signal is then directly coupled to another 6922 dual triode serving as the output driver in a White Follower configuration. This output stage circuit is our favorite because of its super-low output impedance and beefy current-driving capabilities. It can drive long cable lengths and difficult loads, tube or solid-state. Bring it on. No wimpy cathode followers here!


    Setting up the Chinook couldn't be easier. There are two internal settings for optimal gain: 45dB for Moving-Magnet cartridges and 60dB for Moving-Coil cartridges. Set it and forget it! The back panel contains DIP switches for adjusting the input resistive and capacitance loading values. 31 possible options between 26 and 800 Ohms plus 47k Ohms and 7 capacitive loading choices between 50 pF and 350 pF provide flexibility to match any cartridge and fine tune the tone. Audiophile-grade and time-proven componentry is used throughout, embodying Manley's dedication to seductive sonics, combined with the reliability that professionals around the world depend on. At just about a quarter of the price of our revered Steelhead preamplifier, the Chinook's focus is on elegance of design, careful execution, efficient construction, and appreciable quality.


    Designed and built in California, the Chinook exemplifies Manley's commitment to our local community and to a simple, clean, and quiet signal path. The Chinook demonstrates the supreme linearity of vacuum tubes while providing the flexibility needed to embrace any turntable setup. Everything from the most exotic 180 gram audiophile pressing to 25 cent thrift-store classics will be reproduced accurately and musically.


    Don't let this one get away! Hook a Chinook!


    Manley Labs
    $2,400.00
    Manley Chinook Phono Stage Buy Now
  • TAK-H Phono Cable MULTIPLE OPTIONS AVAILABLE TAK-H Phono Cable Quick View

    $404.50
    Buy Now
    x

    TAK-H Phono Cable

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Kimber Kable understands that a turntable is an extension of the audiophile's commitment to musical enjoyment. TAK™ preserves all the precious detail that can be extracted from vinyl. OCQ/2™ (Orthogonal GyroQuadratic/2 channel) braiding virtually eliminates electromagnetic interference, radio frequency interference and crosstalk. Proprietary shielding material drastically reduces low frequency hum. Standard terminations are high quality 5-pin DIN to RCA or XLR. Other termination options are available on request.


    Kimber Kable
    $404.50
    TAK-H Phono Cable - Multiple Options Available
    Buy Now
  • Lehmann Black Cube Original Phono Stage Lehmann Black Cube Original Phono Stage Quick View

    $629.00
    Buy Now
    x

    Lehmann Black Cube Original Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Black Cube: Cult object since 1995

    Since the market introduction in 1995 the Black Cube phono stages by Lehmannaudio have become cult objects for analog oriented music lovers. Countless positive reviews and awards, and an unrivalled customer satisfaction worldwide document this truly exceptional success. The Black Cube is produced in small numbers and sonically superior to mass industry products.


    The Lehmannaudio Black Cube phono stage is compatible with practically all available cartridges on the market from High Output MM to the lowest output MC cartridges. Apart from the standard switch settings there is one onboard slot that can be fitted with a custom impedance to supply perfect termination even for the most exotic cartridges. Since 2006 there is a separate hard wire custom impedance slot that needs no DIP-switch to be activated. Customization possibilities are infinite. No more need for expensive impedance plugs!


    Newly developed input stages

    The newly developed input stages used in the Black Cube can also be found in top notch mixing consoles or in well known professional microphone preamps. The entirely passive RIAA equalization network is realized with high precision MKP capacitors. All resistors are of the low noise metal film variety. The switches for gain and load settings have gold plated connectors.


    Because of the small outer dimensions the Black Cube can be placed next to the turntable. This minimizes loss due to cable lengths. The low noise regulated external power supply is connected with Neutrik XLR connectors to the dedicated DC power supply.


    Lehmannaudio always pays special attention to details: the cable between power supply and audio section is shielded. The cases of both the power supply and the audio section are made of nonmagnetic materials and the case of the audio section is even equipped with a top cover coated with a special anti-resonance treatment.


    Lehmann Audio
    $629.00
    MM and MC Phono Stage
    Buy Now
  • Lehmann Black Cube SE Phono Stage Lehmann Black Cube SE Phono Stage Quick View

    $929.00
    Buy Now
    x

    Lehmann Black Cube SE Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Since the market introduction in 1995 the Black Cube phono stages by Lehmannaudio have become cult objects for analog oriented music lovers. Countless positive reviews and awards, and an unrivalled customer satisfaction worldwide document this truly exceptional success.


    The device has even be vastly improved in 2006. A special 30 VA toroidal transformer of the PWX power supply is the main reason for the sonic performance achieved with the Black Cube SE. This transformer is not only overdimensioned but even sports a grounded isolation coil between the primary and secondary coil. The results: much more bass authority, a more liquid midrange as well as more openness. These sonic benefits are without any doubt the reasons that more and more music lovers choose the Black Cube SE right from the start.


    No more need for expensive impedance plugs!

    The Lehmannaudio Black Cube SE phono stage is compatible with practically all available cartridges on the market from High Output MM to MC. Apart from the standard switch settings there is one onboard slot plus one hard wire slot that can be fitted with a custom impedances to supply perfect termination even for the most exotic cartridges. No more need for expensive impedance plugs!


    The input stages used in the Black Cube SE can also be found in top notch mixing consoles or in well known professional microphone preamps. The entirely passive RIAA equalization network is realized with high precision foil capacitors. All resistors are of the low noise metal film variety. The switches for gain and load settings have gold plated connectors. Because of the small outer dimensions the Black Cube SE can be placed next to the turntable. This minimizes loss due to cable lengths.


    Lehmannaudio always pays special attention to details: the cable between power supply and audio section is shielded and uses Neutrik connectors with gold plated contacts at the power supply side. The cases of both the power supply and the audio section are made of nonmagnetic material (aluminium) and are equipped with a top cover coated with a special anti-resonance treatment.


    Lehmann Audio
    $929.00
    MM and MC Phono Stage Buy Now
  • VPI Voyager Phono Preamplifier VPI Voyager Phono Preamplifier Quick View

    $2,499.99
    Buy Now
    x

    VPI Voyager Phono Preamplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The goal of the Voyager is to create an easy phono option for music lovers getting involved in the VPI line. Voyager has been designed using VPI turntables and is naturally synergistic with the line. In addition, the Voyager gives customers who might own a different turntable brand a chance to join the VPI family through our phono preamplifier.


    VPI's new Voyager phono preamplifier, the latest addition to the VPI product line, is a true high-performance design that provides both MM/MC gain and two input capability. With a front panel selection of inputs and MC/MM gain and loading, tonearm and cartridge swaps are easily accomplished.


    MM gain is 42db, loading 47K ohms; capacitive loading is selectable between 100pf, 200pf and 270pf.


    MC gain is 62db with loading selectable between 100, 500 and 1K ohms.


    Internal switching of gain and loading is accomplished using high reliability small signal relays.


    The Voyager faceplate is interchangeable and could be swapped down the road with different finishes.


    Circuit Overview:


    The Voyager utilizes a two stage design: a JFET-based input stage providing the interface with the cartridge, and the gain and drive for the 75 microseconds passive equalization network that follows it. The second stage provides an additional 24db of gain and provides active feedback for tracking the low frequency portion of the RIAA curve.
    Both stages are based on matched cascoded Linear Systems JFETS and are servo controlled. Cascode references are supplied by precision/ low noise reference devices.


    The power supplies are unity gain voltage reference designs for fast response and low noise.


    The circuit layout is a work of engineering art and the results of many years of study and experimentation.


    The Voyager presents a sense of purity and low level detail resolution that is highly musical. The design is intentionally symmetrical and single-ended.


    VPI Industries
    $2,499.99
    Phono Preamplifier Buy Now
  • Pluto Phono Preamp 2 COLORS AVAILABLE Pluto Phono Preamp Quick View

    $99.00
    Buy Now
    x

    Pluto Phono Preamp


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Pluto is a low-noise phono preamp for moving magnet (MM) cartridges. It combines high-quality components and elegant circuit design to accurately boost your turntable's signal at this crucial stage of amplification. Pluto's RIAA network consists of WIMA film capacitors and precision resistors for detailed and distortion-free sound. It features a single high-performance gain stage and a subsonic filter to remove low-frequency noise - all housed within a steel enclosure that prevents interference.


    Pluto is built in Boston, MA and comes with a 3 year warranty.


    U-Turn Audio
    $99.00
    Phono Preamp - Black Or White
    Buy Now
  • Pro-Ject VT-E BT Turntable 3 COLORS AVAILABLE Pro-Ject VT-E BT Turntable Quick View

    $499.00
    Buy Now
    x

    Pro-Ject VT-E BT Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audiophile, wireless "Plug & Play" turntable with easiest possible vertical set-up including wall-mount option!


    A turntable set-up does not need to be complicated like rocket-science, our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left- and right-handed users*. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set. The VT-E BT turntable can be positioned on a table or mounted on a wall. For further ease of use, it comes with a phono pre-amplifier and Bluetooth transmitter. So even a wireless solution is possible! You can use both Bluetooth and RCA output at the same time. VT-E BT, the world's first wireless turntable, is available in black, red or white high gloss colour.


    *for the left-handed option, please contact our audio advisor.




    Pro-Ject
    $499.00
    VT-E BT Turntable - 3 Colors Available
    Buy Now
  • Bellari VP530 USB/Tube Phono Stage Bellari VP530 USB/Tube Phono Stage Quick View

    $399.00
    Buy Now
    x

    Bellari VP530 USB/Tube Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The vp530 is a usb/tube phono preamp for use with moving-magnet and high output moving-coil cartridges. It includes a built in headphone amplifier, Burr-Brown A2D converter w/usb output, and RIAA curve/flat EQ. The vp530 is designed to amplify an RIAA equalized phono signal to a hi-level signal or provide a USB digital output. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.


    This product is not eligible for discount.


    Accessories
    $399.00
    Bellari VP530 USB/Tube Phono Stage Buy Now
  • TAK-Cu Phono Cable MULTIPLE OPTIONS AVAILABLE TAK-Cu Phono Cable Quick View

    $265.00
    Buy Now
    x

    TAK-Cu Phono Cable

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Kimber Kable understands that a turntable is an extension of the audiophile's commitment to musical enjoyment. TAK™ preserves all the precious detail that can be extracted from vinyl. OCQ/2™ (Orthogonal GyroQuadratic/2 channel) braiding virtually eliminates electromagnetic interference, radio frequency interference and crosstalk. Proprietary shielding material drastically reduces low frequency hum. Standard terminations are high quality 5-pin DIN to RCA or XLR. Other termination options are available on request.


    Kimber Kable
    $265.00
    TAK-Cu Phono Cable - Multiple Options Available
    Buy Now
  • Smart Phono V2 Phono Stage Smart Phono V2 Phono Stage Quick View

    $700.00
    Buy Now
    x

    Smart Phono V2 Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Smart Phono v2 features a gain attenuator, conveniently located on top, allowing precise level-matching between phono and other line inputs. A power on/off button, located on top of the chassis, is another new feature on the Smart Phono v2. Looking underneath, the Smart Phono v2 features extensive loading options and sub-sonic filter, making it compatible with virtually all phono cartridges. High-quality, gold-plated input and output RCA terminals give superb contact.


    The Smart Phono v2 delivers the performance and features of more expensive phono stages in a small, stylish and cost-effective package.


    Clearaudio Equipment
    $700.00
    Smart Phono V2 Buy Now
  • Smart Phono V2 Headphone Phono Stage Smart Phono V2 Headphone Phono Stage Quick View

    $775.00
    Buy Now
    x

    Smart Phono V2 Headphone Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    A minimalist aluminium housing that contains one of the best sounding phonostages in its market. Up to 54 decibels gain at one kilohertz and an extremely linear frequency response deliver unprecedented quality at this price point. For MM and MC cartridges there are two separate circuit designs using SMD technology, which are selected by a slide switch on the underside.


    The Smart Phono Headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.


    Clearaudio Equipment
    $775.00
    Smart Phono V2 Headphone Buy Now
  • Pro-Ject Phono Box S 2 COLORS AVAILABLE Pro-Ject Phono Box S Quick View

    $199.00
    Buy Now
    x

    Pro-Ject Phono Box S


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Value-Based Audiophile MM/MC Phono Stage With Adjustable Cartridge Loading


    The Pro-Ject Phono Box S is an audiophile grade phono stage featuring dual-mono circuit topology, high-grade component parts and precise RIAA equalization. Four adjustable gain levels, input impedance and capacitance settings are available to best match your phono cartridge for performance optimization. A switchable subsonic filter eliminates rumble below 20 Hz. High-quality parts and adjustment flexibility give the Phono Box S true class-leading performance. An outboard power supply is included.


    Pro-Ject
    $199.00
    Phono Box S - 2 Colors Available
    Buy Now
  • Phono Amp PA 1.2 Phono Amp PA 1.2 Quick View

    $175.00
    Buy Now
    x

    Phono Amp PA 1.2

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The music hall phono amp is the perfect solution for attaching a turntable to a receiver or integrated amplifier. It is a low noise high quality phono pre amp that accepts both moving magnet and moving coil cartridges. The beautifully finished extruded aluminum box wards off the effects of stray magnetic fields and provides a safe quiet environment for the sensitive electronics it houses thus providing you with the best sound possible from your turntable.


    This product is not eligible for discount.


    Music Hall
    $175.00
    Music Hall Phono Amp PA1.2 Buy Now
  • Pro-Ject Phono Box MM Pro-Ject Phono Box MM Quick View

    $79.00
    Buy Now
    x

    Pro-Ject Phono Box MM


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    For MM Cartridges


    MM Phono Rreamp


    Preamplifier for MM cartridges. Precise RIAA equalisation and Low noise floor. Output stage with ultra-low impedance with Gold-plated RCA socket.


    Pro-Ject
    $79.00
    Phono Box MM Buy Now
  • VPI Cliffwood Phono Preamplifier TWO COLORS AVAILABLE VPI Cliffwood Phono Preamplifier Quick View

    $499.99
    Buy Now
    x

    VPI Cliffwood Phono Preamplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Cliffwood Phono Preamplifier is a MM phono and incorporates the same electronics that is built into the VPI Player.


    The Cliffwood phono is meant to be a compliment to the VPI Cliffwood table giving the customer the chance to purchase both units to easily start their listening experience. VPI says they are not looking to go head to head with other companies making electronics. Rather, this is focused on completing the VPI entry level story for a customer to have all the tools they need to listen to their music.


    VPI Industries
    $499.99
    Phono Preamplifier - 2 Colors Available
    Buy Now
  • Rogers PA-1A Phono Pre-Amplifier Rogers PA-1A Phono Pre-Amplifier Quick View

    $7,300.00
    Buy Now
    x

    Rogers PA-1A Phono Pre-Amplifier

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Analog performance to ultimate perfection has always been the standard at Rogers High Fidelity. Our newest performer, the PA-1A Phono Preamplifier follows our heritage in every detail. You have not heard your record collection until you have heard it being played through the Rogers High Fidelity PA-1A Phono Preamplifier. It's dual-mono, Class-A, all-tube design has an industry leading signal-to-noise ratio and represents an all out assault on the state-of-the-art. Unless you are listening to your vinyl collection through our high performance, vacuum-tube preamp, you are missing out on half of the tonal qualities that you love about analog reproduction.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $7,300.00
    Phono Preamplifier Buy Now
  • OBH-15MK2 MM/MC Phono Pre-Amplifier OBH-15MK2 MM/MC Phono Pre-Amplifier Quick View

    $595.00
    Buy Now
    x

    OBH-15MK2 MM/MC Phono Pre-Amplifier


    With modern amplifiers expected to cater for so many new source devices, the Phono capability, once very common, is one of those built-in features that has disappeared in recent times. The engineering team at Creek Audio has always loved the benefits of vinyl records and continues to work on technical and sonic improvements to its range of Phono amp options, be it the stand-alone OBH or Wyndsor or plug-in Sequel types. Tasked with designing a replacement for the long running OBH-15, the team came up with some valuable improvements and additional features; surprisingly they made them all fit into the original OBH-sized casework.


    The OBH-15 mk2 has a completely new circuit design, with a discrete transistor MC and integrated circuit MM stage. Unlike its predecessor, the new amp has multiple gain settings and matching capabilities for capacitance and resistance. The signal required by most modern amplifiers is described as being 'LINE' level which is, in technical terms, between 200 and 500 milli-Volts sensitivity with a flat frequency response. Unless your amplifier has a specific 'Phono' or Disc input, the level will be too low to play vinyl and the frequency response will be wrong.


    Creek Audio
    $595.00
    Creek Audio OBH-15Mk2 MM/MC Phono Pre-amp Buy Now
  • Lehmann Decade Phono Stage 2 COLORS AVAILABLE Lehmann Decade Phono Stage Quick View

    $2,099.00
    Buy Now
    x

    Lehmann Decade Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Lehmannaudio is has built a reputation and unrivalled customer satisfaction on the sound and build quality of phono stages. The ambitious Decade effectively fills the gap between the Black Cube SE II and the Lehmannaudio reference phono stage, the Silver Cube. In the Decade, like in all Lehmannaudio devices, top notch technology is used that normally can be found only in price ranges far above.


    The input stages of the Decade can also be found in top notch mixing consoles and high class microphone preamps of professional studio electronics. The highly accurate, passive RIAA equalisation network is placed between two linear gain stages and uses precision MKP capacitors. This results in a very stable soundstage reproduction and pin point localisation of instruments.


    The maximum gain of 66 dB is well enough for even very exotic low output MC cartridges. Impedance load adaption is practically infinite as with all Lehmannaudio phono stages: there is a free slot for a custom impedance so that every existing MC cartridge on the market can be loaded properly. Input capacitances are adjustable as well.


    Soft bass roll-off filter and PWX II power supply.

    The Decade is the first phono stage by Lehmannaudio that offers a Soft-Bass- Rolloff-Filter and gain selections accessible via toggle switches at the face plate. Both, gain and filter functions, are executed by studio grade relais inside the unit.


    The Decade is powered by the PWX II, a power supply especially developed for the unit which is downward compatible with the PWX. This means that Black Cube audio sections can also be connected. The second power outlet at the PWX II is made especially for that purpose. The PWX II power supply with chokes at critical places powers the Decade with very clean DC power and - like the Silver Cube - is connected to the audio section via a shielded cable with Neutrik XLR plugs.


    Lehmann Audio
    $2,099.00
    Phono Stage - 2 Colors Available
    Buy Now
  • Soundsmith MCP2 Phono Preamp OUTPUT OPTIONS Soundsmith MCP2 Phono Preamp Quick View

    $1,199.95
    Buy Now
    x

    Soundsmith MCP2 Phono Preamp


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    An upgrade in quality does not have to deplete your wallet.


    The Soundsmith MMP & MCP preamps are revolutionary designs for their price - and the comments we get at each hi-fi show prove it. These preamps are what we use to demo our cartridges at all our shows even our high end cartridge designs.


    Each hand - made preamp circuit is housed in a high quality aluminum case, powered by an external DC power supply, with easy to set up instructions. All amplifiers have extremely accurate RIAA equalization response, ultra low noise and vanishing levels of THD.


    Our new MCP-2 is a low cost yet very high quality way to enjoy your low output Soundsmith cartridge or any MC cartridge; it is designed with continuously variable loading (10 Ohms to 5K Ohms) to allow use with any low output design and allows you the ease of simple tuning to get the high end response exactly to your listening preference.


    Built-in high quality Soundsmith designed and manufactured fully shielded step up transformers assure noise free and ultra-low distortion to allow unfettered enjoyment from your treasured vinyl collection. The new MCP-2 has been favorable demonstrated against preamps costing $4000 - $9000 with surprising results... and compliments to Soundsmith.


    Optional, for all models we can built 50 ohm output, i.e. for driving long lines. $300 extra. (Select in dropdown)



    Our MCP2 (Moving Coil Preamp) works well with any of our Low Output (Moving Iron / Fixed Coil) cartridge line.


    Workmanship on this product is warranted for 2 full years.


    Soundsmith
    $1,199.95
    MCP-2 Phono Preamp - Output Options
    Buy Now
  • Soundsmith MMP4 Phono Preamp OUTPUT OPTIONS Soundsmith MMP4 Phono Preamp Quick View

    $599.95
    Buy Now
    x

    Soundsmith MMP4 Phono Preamp


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    An upgrade in quality does not have to deplete your wallet.


    The Soundsmith MMP & MCP preamps are revolutionary designs for their price - and the comments we get at each hi-fi show prove it. These preamps are what we use to demo our cartridges at all our shows even our high end cartridge designs.


    Each hand - made preamp circuit is housed in a high quality aluminum case, powered by an external DC power supply, with easy to set up instructions. All amplifiers have extremely accurate RIAA equalization response.


    Our MMP4 is a more cost effective way to enjoy your high output MC, MM or MI cartridge. Its design is based on our highly praised MMP3, and the specs and sonics make it a great value. It features 47K loading and 43 dB of gain.


    Employing very high quality components, the MMP4 assures noise free and ultra-low distortion to allow unfettered enjoyment from your treasured vinyl collection. The MMP4 and MMP3 have been favorably demonstrated against preamps costing $2000 - $4000 with surprising results... and compliments to Soundsmith.


    Optional, for all models we can built 50 ohm output, i.e. for driving long lines. $300 extra. (Select in dropdown)


    Our MMP3 and MMP4 (Moving Magnet Preamps) work well with any of our Medium and High Output cartridge lines, and other similar cartridges.


    Workmanship on this product is warranted for 2 full years.


    Soundsmith
    $599.95
    MMP-4 Phono Preamp - Output Options
    Buy Now
  • Soundsmith MMP3 Phono Preamp OUTPUT OPTIONS Soundsmith MMP3 Phono Preamp Quick View

    $799.95
    Buy Now
    x

    Soundsmith MMP3 Phono Preamp


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    An upgrade in quality does not have to deplete your wallet.


    The Soundsmith MMP & MCP preamps are revolutionary designs for their price - and the comments we get at each hi-fi show prove it. These preamps are what we use to demo our cartridges at all our shows even our high end cartridge designs.


    Each hand - made preamp circuit is housed in a high quality aluminum case, powered by an external DC power supply, with easy to set up instructions. All amplifiers have extremely accurate RIAA equalization response.


    Optional, for all models we can built 50 ohm output, i.e. for driving long lines. $300 extra. (Select in dropdown)


    Our MMP3 and MMP4 (Moving Magnet Preamps) work well with any of our Medium and High Output cartridge lines, and other similar cartridges.


    Workmanship on this product is warranted for 2 full years.


    Soundsmith
    $799.95
    MMP-3 Phono Preamp - Output Options
    Buy Now
  • Rega Aria Phono Stage Rega Aria Phono Stage Quick View

    $1,499.00
    Buy Now
    x

    Rega Aria Phono Stage

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Design

    Housed within our latest half width custom designed case are two entirely separate high performance phono stages. One fully adjustable dedicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up.


    Technology

    The Aria is an all analogue amplifier with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature. Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal.


    MC stage design & features

    The MC input uses parallel connected low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selecting resistive input loading of 70W to 400W and capacitive loading of 1000pF to 4200pF. The input sensitivity can be changed by 6dB, via the back panel.


    MM Stage design & features

    The MM input uses low noise bipolar input transistors also configured as a compound pair. There are two separate power supplies for each channel and further sub power supplies for each of the low noise input circuits. Nichicon FG electrolytic capacitors have been used in critical positions throughout the power supplies. Polypropylene capacitors have been used in the signal path and equalization networks. Discrete circuitry is used throughout the signal path ensuring full control of the circuit design.


    Rega
    $1,499.00
    MM and MC Phono Stage Buy Now
  • TAK-Ag Phono Cable MULTIPLE OPTIONS AVAILABLE TAK-Ag Phono Cable Quick View

    $654.50
    Buy Now
    x

    TAK-Ag Phono Cable

    Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Kimber Kable understands that a turntable is an extension of the audiophile's commitment to musical enjoyment. TAK™ preserves all the precious detail that can be extracted from vinyl. OCQ/2™ (Orthogonal GyroQuadratic/2 channel) braiding virtually eliminates electromagnetic interference, radio frequency interference and crosstalk. Proprietary shielding material drastically reduces low frequency hum. Standard terminations are high quality 5-pin DIN to RCA or XLR. Other termination options are available on request.


    Kimber Kable
    $654.50
    TAK-Ag Phono Cable - Multiple Options Available
    Buy Now
  • Nano V2 Phono Stage Nano V2 Phono Stage Quick View

    $450.00
    Buy Now
    x

    Nano V2 Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The printed circuit board is encased in a solid CNC-machined, resonance-free aluminum chassis. The latest sophisticated surface-mount technology is used in conjunction with precision electronic components, such as Burr-Brown (Texas Instruments) integrated circuits. The Nano v2s extremely short signal paths lead to pure, noise-free music reproduction.


    The fully dual-mono design features separate left and right switches for input loading and gain control. Users can also select between moving coil or moving magnet sensitivity, extracting the best results from virtually any phono cartridge.


    The new Nano Phono v2 moving coil / moving magnet phono stage provides higher quality performance.


    Clearaudio Equipment
    $450.00
    Nano V2 Phonostage Buy Now
Go to top