Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Power Amp

'
Results per page:
  • Rogers EHF-100 Amplifier Rogers EHF-100 Amplifier Quick View

    $8,000.00
    Buy Now
    x

    Rogers EHF-100 Amplifier

    >
    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Never before has music sounded so good coming out of your speakers. Clarity rules with the EHF-100 and EHF-200. Trust us. Turn them on and youll be blown away by their concert hall quality. There may be other tube amps on the market, but nothing compares to the power and precision of these amps. The sound is stunning and so is the look. All you have to do is close your eyes and immerse yourself in the music.


    Proudly made in New York.


    All Roger's High Fidelity products come with a Limited Transferrable Lifetime Warranty


    Due to dealer relationships, Rogers High Fidelity cannot be shipped to Boston or NYC.


    Rogers High Fidelity
    $8,000.00
    Integrated Amplifier Buy Now
  • Marantz MM8077 Amplifier Marantz MM8077 Amplifier Quick View

    $2,399.00
    Buy Now
    x

    Marantz MM8077 Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Designed for the ultimate music and movie surround sound experience, the Marantz MM8077 7-channel power amplifier delivers power and detail, and is rated at 150 watts per channel into 8 ohms, and 180 watts per channel into 6 ohms.


    The power supply features a high current toroidal power transformer along with high power (71WVDC) filter capacitors with a total 100,000µF capacitance to easily handle sharp short-term transient peaks.



    Featuring our unique current feedback discrete power amp output stages that are identical for all channels, the MM8077 is equipped with multiple high current discrete power transistors that feature high slew rate and wide operating bandwidth to extract the most detail from today's high resolution audio formats.


    The output devices are mounted on our unique dual extruded aluminum alloy heat sink assembly, configured in a tunnel arrangement that provides both passive and active cooling. The massive heat sinks feature multiple ribbed fins that provide a large passive cooling area, and the assembly is book-ended with a whisper quiet fan that automatically kicks in to provide near silent active cooling when the soundtrack heats up. As the fan is mounted internally directly to the heat sinks, and not externally to the chassis cover as is often the case, even when it's running, it's designed to be whisper quiet.



    For maximum connectivity, the MM8077 features both unbalanced (RCA) and balanced (XLR) inputs, and each amp channel can be configured to use your choice of input connector. The loudspeaker terminals feature audiophile-grade construction, and are gold-plated for maximum signal transfer, and they can easily handle a wide range of audiophile speaker cable connectors.



    The MM8077 features a DC trigger input for external power on/off control, and there's also dual RC-5 remote control in/out jacks for connection to a compatible Marantz A/V pre-amp/processor.


    The copper-plated chassis provides isolation from extraneous noise, and features a multi-layer reinforced bottom panel assembly for maximum rigidity along with triple-layer top cover. Elegantly finished in anodized black satin, the MM8077 features the classic Marantz ringed porthole display with a blue illumination accent that includes a display on/off function.


    Marantz
    $2,399.00
    Power Amplifier Buy Now
  • Marantz PM8006 Integrated Amplifier Marantz PM8006 Integrated Amplifier Quick View

    $1,199.00
    Buy Now
    x

    Marantz PM8006 Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Integrated Amplifier With Power Amp Direct Input


    Combining fully discrete current feedback circuitry and our exclusive HDAM technology, the Marantz PM8006 integrated stereo amplifier delivers audiophile grade sound quality along with system operational flexibility. Rated at 70 watts per channel into 8 ohms, the PM8006 features a robust power supply along with high current capability to deliver 100 watts per channel into 4 ohms, for compatibility and operational stability with the widest range of loudspeakers.


    The versatile pre-amp section features 6 line level inputs including a phono (MM) input, and the PM8006 also includes pre-amp outputs along with a power amp direct input, which lets you use the unit as a standalone power amplifier for integration into a multi-channel home theater system. For precise sound tailoring, the PM8006 features our triple tone control system, with separate controls for the bass, midrange and treble segments. The elegant remote control features an ergonomic layout for easy operation, and includes the ability to control our companion SA8005 disc player and one of our network players.


    Marantz HDAM Technology


    The PM8006 features our exclusive HDAM (Hyper Dynamic Amplifier Module) technology, which consists of precision discrete selected circuit elements on a compact sub-board, instead of conventional op-amp integrated circuits. Multiple HDAM units are employed, including HDAM-SA3 and HDAM-SA2 versions that provide gain and buffering functions, to deliver dynamic and detailed sound quality. The PM8006 features current feedback technology for ultra low distortion and wideband response, along with superb musicality.


    High Current Power Supply


    The robust power supply features a high current toroidal main power transformer that is rated at 625VA, to easily provide extra power to the amplifier stage in order to handle demanding short term peaks. High current Shottky barrier diodes in the rectification stage are rated at 20 amps, with the ability to handle up to 180 amps peak current, providing sufficient power reserve to handle virtually any loudspeaker load.


    Fully Discrete High Current Output Stages


    The PM8006 is equipped with multiple high speed, high current power output devices that are each rated at 14 amps of current output capability, providing a very high amount of dynamic headroom, along with compatibility with lower impedance loudspeakers. For optimum heat dissipation, the PM8006 is equipped with solid aluminum power amplifier heat sinks, with a combined total radiating area of 326 square inches, eliminating the need for fans. The PM8006 is conservatively rated at 70 watts per channel into 8 ohms, and 100 watts per channel into 4 ohms, for compatibility with the widest range of loudspeakers.


    Solid Chassis Construction


    For the utmost stability and protection from induced vibrations, the PM8006 features a rugged chassis design, which includes a triple layer bottom plate. To eliminate distortion from stray magnetic fields, the high current toroidal main power transformer features double shielding.


    Versatile Pre-Amplifier Functions


    There are 6 line level inputs, to handle a wide range of sources, including a dedicated phono input (MM) that features discrete topology to deliver the utmost fidelity from your favorite vinyl recordings, and all inputs and outputs are gold-plated for optimum signal transfer. The Source Direct function bypasses unnecessary circuit blocks for the straightest path from input to the speaker terminals. Pre-amp outputs let you connect a separate stereo power amplifier for a bi-amp loudspeaker system, or for playback in a separate room. The power amp direct input lets you connect the PM8006 to another component, such as a surround sound processor, for integration within a multi-channel home theater system.


    For precision tonal balancing, we've equipped the PM8006 with our Tri-Tone control system, with separate tone controls for the bass, midrange and treble bands, which lets you fine tune the spectral balance to your preference, and is especially useful with older recordings that suffer from tonal imbalance.


    Audiophile Grade Loudspeaker Terminals


    Equipped with premium audiophile grade loudspeaker terminals that are designed to accept a wide range of speaker cable termination types, the PM8006 also features A/B speaker switching for increased system configuration flexibility.


    System Remote Control


    The elegant, ergonomically designed remote control is equipped with additional functionality, which lets you control a companion Marantz disc player (such as our SA8005) and a Marantz network audio player. Remote control input and output jacks let you directly connect the PM8006 to other Marantz components for easy system control.


    The Marantz PM8006 integrated amplifier is backed by a limited three-year warranty.


    Marantz
    $1,199.00
    Marantz PM8006 Integrated Amp Buy Now
  • PS Audio Stellar M700 Mono Amplifier 2 COLORS AVAILABLE PS Audio Stellar M700 Mono Amplifier Quick View

    $2,998.00
    Buy Now
    x

    PS Audio Stellar M700 Mono Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Enjoy an unheard of level of control and command from your loudspeakers with the Stellar M700, one of the most extraordinary under $5,000 power amplifier pair ever crafted. The M700 combines the slam, linearity, control and pacing of a Class D output stage with the warmth, grace, and rich inner detail of Stellar's Class A Analog Cell. The results are nothing short of breathtaking. Liberate all the toe-tapping energy trapped in your media library. Plumb music's subterranean depths as your system gives you more bottom end than you thought possible. Revel in rich layers of fine, full detail. Marvel at the deep, extraordinary, wall-to-wall soundstage. Control your loudspeakers as never before. Effortless. Lush. Stellar.


    The problems faced when crafting a new power amplifier are many-delivering sufficient power, control, frequency extension, and dynamics while maintaining a perfectly layered soundstage under the most complex musical passages.


    All amplifiers sound different. What determines sound quality are the components and topologies of the amp's input voltage stage and output current stage. Each section should complement the other. Between them, the amp develops its sound.


    Stellar's design imperatives-affordable pricing, uncompromised sonics-were major challenges solved by the invention of a unique new circuit christened the Analog Cell.


    Stellar engineer Darren Myers had planned from the outset to take advantage of Class D's high current, low distortion, ruler flat linearity for the output stage-knowing full well it is the input stage that determines sonic character. This critical interface between preamplifier and power amplifier is where Stellar's magic would be unveiled; where Myers could lavish upon the music the sweet, tube-like quality of Class A biased MOSFETs. His challenge was to synergistically marry both input and output topologies, for which he invented Stellar's Analog Cell.


    The Analog Cell is the heart of the M700's musicality, where richly overlayed layers of music's inner details are preserved even in the most complex orchestral crescendos. The Analog Cell is a proprietary, fully differential, zero feedback, discrete, Class A MOSFET circuit, hand-tuned to capture the smallest micro dynamics without sacrificing the loudest macro dynamics music has to offer.


    PS Audio
    $2,998.00
    Power Amplifier (Pair) - Black or Silver
    Buy Now
  • Right Now (Speakers Corner) Right Now (Speakers Corner) Quick View

    $34.99
    Buy Now
    x

    Right Now (Speakers Corner)

    A great deal has been said about Blues and Rock'n'Roll musicians being inspired to great things by folk music. But one hears little about those who work quietly in the background, far removed from dazzling light shows, power amps and fog machines, and who create new strains of tender plants from the roots of traditional folk, so to speak. One such person is Wizz Jones from south England. He can write songs, and he can sing - but it would be far too simple to describe him as a songwriter. His cultivated and versatile performance technique on the guitar bears witness to his personal aspiration for perfection on his instrument. With Jones all this culminates in highly original high-end folk: he's particularly laid-back in groovy numbers (Right Now, No More Time To Try), where the elastic and springy sound of the guitar is enhanced with chirping sitar and wavering bottleneck slides so typical of the times. Alongside these are the carefully re-worked traditional melodies (American Land), a 17th-century tune (Raven) where the singer plays 'call-and-response' with himself, and a solid 16-bar blues (Deep Water) in the early Chicago style. Particular attention should be paid to the numbers in which he collaborates with Alan Tunbridge and is fired by his genial ideas - specially recommended: Mary Go 'Round.



    Musicians:



    • Wizz Jones (vocals, guitar)

    • Sandy Jones (banjo)

    • Pete Berryman (guitar)

    • Reanna Sutcliffe (piano, harpischord, vocals)

    • John Renbourn (sitar, harmonica)

    • Andy Fernbach (piano)

    • Sue Draheim (vocals)

    • Malcolm Pool (bass)

    • Ian Hoyle (drums)




    Recording: 1972 by Colin Caldwell at Marquee Studios, London

    Production: John Renbourn




    About Speakers Corner



    At the beginning of the 90s, in the early days of audiophile vinyl re-releases, the situation was fairly straightforward. Companies such as DCC, Mobile Fidelity, Classic Records and, of course, Speakers Corner all maintained a mutual, unwritten ethical code: we would only use analogue tapes to manufacture records.



    During the course of the present vinyl hype, many others have jumped on the bandwagon in the hope of securing a corner of the market. Very often they are not so ethical and use every imaginable source to master from: CDs, LPs, digital files, MP3s - or employed existant tools from the 80s and 90s for manufacturing.



    A digital delay is gladly used when cutting a lacquer disc because tape machines with an analogue delay have become quite rare and are therefore expensive. When cutting the lacquer, the audio signal is delayed by one LP revolution against the signal, which controls the cutter head, and for this a digital delay is very often employed. Of course, the resultant sound signal is completely digital and thus only as good as this delay.



    We should like to emphasise that Speakers Corner Records on principle only uses the original master tape as the basis for the entirely analogue cutting of lacquer discs. In addition, the pressing tool is newly manufactured as a matter of principle. We have one digital recording in our catalogue (Alan Parsons / Eye In The Sky"), but even in this particular case we used the analogue tapes for cutting.



    We only employ existing tools for manufacturing if an improved result is not forthcoming, e.g. the title Elvis Is Back, which was mastered by Steve Hoffman and Kevin Gray, or several titles from our Philips Classics series, which in any case Willem Makkee cut from the original masters at the Emil Berliner Studios in the 90s. It goes without saying that we only used the mother and that new tools were made for our production.



    To put it in a nutshell: we can ensure you that our releases are free from any kind of digital effects - excluding the exception above - and that the lacquer discs are newly cut.



    1. Which of Them You Love the Best
    2. One Grain of Sand
    3. City of the Angels
    4. The Raven
    5. Right Now
    6. Find a Man for You Girl
    7. American Land
    8. No More Time to Try
    9. Mary Go 'Round
    10. Deep Water
    Wizz Jones
    $34.99
    180 Gram Audiophile Virgin Imported Vinyl LP - Sealed Buy Now
  • AmpsandSound Casablanca Mono Block Amplifier AmpsandSound Casablanca Mono Block Amplifier Quick View

    $4,395.00
    Buy Now
    x

    AmpsandSound Casablanca Mono Block Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    AmpsandSound Products Are Handmade In Small Batches and Go Through Extensive Quality Control


    The Casablanca's are aptly named for their classic good looks and commanding performance. They came about in response to repeated requests for a single-ended amp with the power to drive non-compliant or inefficient speakers. Given that large power SE amps are either run in pentode or using exotic power tubes, Ampsandsound opted for a push-pull based amp; a larger version of the Stereo 15.


    The Casablanca's provide 60 watts with KT88/6550 power tubes, and 45 watts with EL-34s. Based on the Eico circuit and using a 12AX7/6SN7 front end allows access to a vast array of NOS/NIB tubes. The Casablanca's come with 8ohm and 4ohm taps and can be ordered with 16ohm taps if desired. To provide reliable power and a sweet sound, they turned to their design partners and carefully evaluated 2 new takes based on similar designs; the Eico HF97 and the Dynaco MKIII. They built both and did a shootout with the reigning king of push-pull amps, the McIntosh MC275.


    The results were startling. The Eico based circuit was a clear improvement over their take on the MKIII, and was on par with the MC275. The Casablanca's provided extremely articulate bass, with truly remarkable mid and high frequency extension. The bottom line - this amp provides the warmth and detail that is expected from reference level push-pull amps, and nearly limitless personalization with different tube combinations. The tubes included with purchase are new Tungsol 12AX7, Tungsol 6SN7, and Tungsol 6550s.


    They were recently asked what differentiates Ampsandsound Casablancas from any of the other well-made gear in the $2000-$3000 range. The answer is that there may be few differences, but the differences that do exist are pivotal to their approach to the reproduction of music. First off, many tube amplifiers in the Casablanca's price range have lower power. Other similar-price amplifiers are stereo amps, not providing the performance and channel separation for which mono-blocks are known.


    They chose the Casablanca design to allow for the largest practical power supply. Also, mono-blocks require 40% more parts, and like all Ampsandsound components, the Casablancas utilize modern materials to bring a higher level of performance. This includes using 1-2% resistors instead of the less costly and more common 10% variety, and coupling capacitors with 5% tolerance instead of 20%. Point-to-point wiring would allow for streamlined building, but their PCB's provide superior grounding and noise isolation, with the result that they have realized and improved upon the sonic characteristics of the great amplifiers of the 50's and 60's.


    AmpsandSound
    $4,395.00
    Mono Block Amplifier (Pair) Buy Now
  • Crosley S100 Stereo Powered Speakers (On Sale) Crosley S100 Stereo Powered Speakers (On Sale) On Sale Quick View

    $189.99$169.99Save $20.00 (11%)

    Buy Now
    x

    Crosley S100 Stereo Powered Speakers (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Designed with the turntable in mind, the S100 speakers feature a built-in 30 watt power amp and Bluetooth connectivity. Simply plug in the speakers, connect your Crosley turntable, and crank it up!


    Crosley
    $189.99 $169.99 Save $20.00 (11%)
    S100 Stereo Powered Speakers (Pair) Buy Now
  • Klipsch R-15PM Powered Monitor Speaker (Pair) Klipsch R-15PM Powered Monitor Speaker (Pair) Quick View

    $499.00
    Buy Now
    x

    Klipsch R-15PM Powered Monitor Speaker (Pair)



    The R-15PM powered monitors provide room-filling sound while being compact enough to use anywhere. This extremely efficient, powerful yet simple speaker surrounds listeners in their favorite movies and music. Included with each speaker is a 1 aluminum diaphragm compression driver matched to 90° x 90° square Tractrix Horn and 5.25 copper spun magnetically shielded IMG woofer


    Designed For Simple Set Up With Your Turntable, Television, Computer Or Wireless Device.

    Featuring an integrated phono pre-amp, Bluetooth® wireless technology, digital optical, analog RCA and USB inputs, the R-15PM is the most exceptional, versatile monitor in the world.


    High Efficiency Amplification

    No need to worry about the expense, clutter and hassle of an external A/V receiver. The R-15PM monitors feature individual ultra-low noise amplifiers custom built to maximize system performance and eliminate the necessity external amplification.


    Full Featured IR Remote

    Provides easy access to system features such as dedicated source selection, track controls, and play/pause.


    System Expandability

    Allows the addition of a subwoofer to further enhance low frequencies.





    rockrollkeepers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Klipsch Speakers
    $499.00
    R-15PM Powered Monitor Speaker - Pair Buy Now
  • Klipsch The Sixes Powered Monitor Speaker (Pair) Klipsch The Sixes Powered Monitor Speaker (Pair) Quick View

    $799.00
    Buy Now
    x

    Klipsch The Sixes Powered Monitor Speaker (Pair)



    Part of the Klipsch Heritage Wireless series, The Sixes is an incredibly versatile audio system. Able to connect directly to a turntable, TV, computer or Bluetooth® wireless enabled device - these speakers deliver amazing acoustics no matter what source.




    Hi-Fi Sound Without A Receiver

    The Sixes powered monitors deliver room-filling sound without taking up much space thanks to a built-in amplifier that is custom-engineered for these high performance speakers, maximizing output and sound quality. It's finally time to completely forget the expense, clutter and hassle of an external a/v receiver.




    High Efficiency Amplification

    The Sixes incorporate individual ultra-low noise amplifiers that are custom designed to maximize system performance and eliminate the need for external amplification. That means that world-class Klipsch engineers have full control of the signal path. We've picked and tuned the components to be an absolute perfect match throughout, making the system sound incredibly immersive and complete.




    Incredibly Versatile

    Whether you are connecting to a turntable, television, computer, or smart phone, the Sixes powered monitors provide the solution. The Sixes come equipped with an integrated phono pre-amp, Bluetooth® wireless technology, digital optical, analog RCA and USB inputs, allowing you to enjoy superior stereo sound from a beautifully crafted tabletop stereo system.




    Add A Subwoofer

    The Sixes also include a subwoofer output so you can easily add a powered sub to the system.




    Mid-Century Magnificent

    Incorporating luxury materials such as real wood veneer and tactile spun copper switches and knobs, the Klipsch Heritage Wireless series of powered audio systems blends the acoustics and classic design legacy of Paul W. Klipsch with the latest technologies available today.


    192kHz / 24-Bit Decoding To Support High Resolution
    Audio Tracks


    The Sixes powered monitors also feature 192kHz / 24-bit decoding for
    flawless reproduction of high resolution audio tracks from your PC.


    rockrollkeepers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Klipsch Speakers
    $799.00
    Powered Monitor Speaker - Pair Buy Now
  • Crosley K100 Stereo Turntable System (On Sale) Crosley K100 Stereo Turntable System (On Sale) On Sale Quick View

    $389.99$349.99Save $40.00 (10%)

    Buy Now
    x

    Crosley K100 Stereo Turntable System (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Keep the music coming with the K100 two-speed, belt driven turntable stereo system. The balanced s-shaped tonearm offers hydraulic lift control, a lockable rest, and anti-skate technology, ensuring smooth playing. The sleek silver coating, as well as the 30 watt power amp speakers with Bluetooth connectivity, keep the K100 stylish and modern.



    Crosley
    $389.99 $349.99 Save $40.00 (10%)
    K100 Stereo Turntable System Buy Now
  • Crosley K200 Stereo Turntable System (On Sale) Crosley K200 Stereo Turntable System (On Sale) On Sale Quick View

    $469.99$419.99Save $50.00 (11%)

    Buy Now
    x

    Crosley K200 Stereo Turntable System (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The K200 turntable stereo system is a contemporary choice. This direct driven turntable includes 30 watt power amp speakers with Bluetooth connectivity. The smooth s-shaped curve of the tonearm ensures getting in the groove with ease and plays two-speeds. The adjustable counterweight and adjustable pitch control, offer you command over the K200.



    Crosley
    $469.99 $419.99 Save $50.00 (11%)
    K200 Stereo Turntable System Buy Now
  • Creek Audio Evolution 50P 2 COLORS AVAILABLE Creek Audio Evolution 50P Quick View

    $995.00
    Buy Now
    x

    Creek Audio Evolution 50P



    Who needs a power amp? Well, you do, if you use a digital or analogue pre-amplifier like the EVOLUTION 50CD or 100CD, with built-in volume control. It is also possible you already own an integrated amplifier like the EVOLUTION 50A and wish to bi-amp your system to power difficult loudspeaker loads.


    The new 55W (into 8 Ohms) power amplifier forms part of the new generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid control knobs, it's finished with either a black or silver brushed aluminium front panel.


    The EVOLUTION 50P uses a massive 200 Watt toroidal mains transformer with separate windings for high and low current analogue and control circuitry. This solution produces a good power to weight ratio and low magnetic interference. Creek's design policy of connecting several small low impedance capacitors in parallel creates an ultra-high specification capacitor to smooth the DC and helps to produce a very powerful and accurate sound from such a relatively small amplifier.


    This power amplifier has a similar high-end, bi-polar transistor, class A/B power amplifier circuit, to the highly rated EVOLUTION 50A. It achieves very high open-loop gain and low distortion for a smooth and powerful sound. Featuring Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the EVOLUTION 50P Power Amplifier circuit has very low output impedance and is also able to deliver high output current. This combination will provide exceptional speed and control over most loudspeakers.


    A simple unity gain pre-amplifier selects between balanced XLR and direct un-balanced RCA inputs, to enable the user to input two different signals and select between either, on the fly, if required. It is fully protected from over-current, over-temperature and DC faults and will trigger the output and input relays to disengage immediately if an error occurs.


    When required, the Evolution 100P can also be configured as bridged-mono to achieve even higher power output and will therefore sound more dynamic and in control. Please consult Creek Audio or your dealer for details about the external bridging adapter required to simply convert it from stereo into mono operation.


    Creek Audio
    $995.00
    Power Amplifier
    Buy Now
  • Creek Audio Evolution 100P 2 COLORS AVAILABLE Creek Audio Evolution 100P Quick View

    $1,995.00
    Buy Now
    x

    Creek Audio Evolution 100P



    Who needs a power amp? Well, you do, if you use a digital or analogue pre-amplifier like the EVOLUTION 50CD or 100CD, with built-in volume control. It is also possible you already own an integrated amplifier like the EVOLUTION 100A and wish to bi-amp your system to power difficult loudspeaker loads.


    The new Creek power amplifier forms part of the new generation EVOLUTION 100 range of products. Housed in a slim case with engraved front panel and solid control knobs, it's finished with either a black or silver brushed aluminium front panel.


    The EVOLUTION 100P uses a massive 350 Watt toroidal mains transformer with separate windings for high and low current analogue and control circuitry. This solution produces a good power to weight ratio and low magnetic interference. Creek's design policy of connecting several small low impedance capacitors in parallel creates an ultra-high specification capacitor to smooth the DC and helps to produce a very powerful and accurate sound from such a relatively small amplifier.


    This power amplifier has a similar high-end, bi-polar transistor, Class-G power amplifier circuit, to the highly rated EVOLUTION 100A. It achieves very high open-loop gain and low distortion for a smooth and powerful sound. Featuring Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the EVOLUTION 100P Power Amplifier circuit has very low output impedance and is also able to deliver high output current. This combination will provide exceptional speed and control over most loudspeakers.


    A simple unity gain pre-amplifier selects between balanced XLR and direct un-balanced RCA inputs, to enable the user to input two different signals and select between either, on the fly, if required. It is fully protected from over-current, over-temperature and DC faults and will trigger the output and input relays to disengage immediately if an error occurs.


    When required, the Evolution 100P can also be configured as bridged-mono to achieve even higher power output and will therefore sound more dynamic and in control. Please consult Creek Audio or your dealer for details about the external bridging adapter required to simply convert it from stereo into mono operation.



    Creek Audio
    $1,995.00
    Power Amplifier
    Buy Now
  • Chord TTOBY Amplifier Chord TTOBY Amplifier Quick View

    $3,695.00
    Buy Now
    x

    Chord TTOBY Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    THE MATCHING POWER AMP FOR HUGO TT


    The TToby range may be ideally suited to compact living environments, but don't let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn't compromise on power or providing you with the purest audio experience possible.


    The TToby has been designed to complement our desktop DAC/headphone amplifier, the Hugo TT and shares the same compact form factor as its stablemate. The combination of Hugo TT and TToby provides a high-quality hi-fi system, with desktop dimensions and a space-saving footprint. Despite its size, the TToby sets new standards for small amplifiers and takes full advantage of Chord Electronics' proprietary amplification technology and design know-how.


    The addition of TToby, enables owners of the Hugo TT to fully exploit the device as a 'digital preamp', effortlessly driving a wide variety of loudspeakers, large or small, in addition to the Hugo TT's headphone prowess. The TToby is a Class AB design that delivers 60 watts into an 8 ohm load and 120 watts into 4. It includes both an unbalanced and balanced input, to take advantage of the Hugo TT's XLR output.


    TToby features two of our famous high-frequency power supplies and benefits from forced air-cooling through the aluminium casework by means of a sonically closed anechoic miniature multi-speed quadruple-fan plenum chamber, enabling the external design to be free of sharp heatsinks and, therefore, carry a stunning aesthetic. The Hugo TT/TToby combination offers both class-leading DAC and amplification technology via headphones and loudspeakers, giving complete flexibility within the demands of busy households.


    NOTE: TToby is shown in main photo below matching Hugo TT.


    Chord Electronics
    $3,695.00
    Power Amplifier Buy Now
  • Integrated Amplifier A15.3 Integrated Amplifier A15.3 Quick View

    $549.00
    Buy Now
    x

    Integrated Amplifier A15.3


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The a15.3 presents a smart alternative to surround sound receivers and all in one systems. It's the perfect choice for someone looking to assemble their first hi end audio system. Partner it with the matching c-dac15.3 dac cd player and one of our turntables for a great sounding system. Connecting a turntable couldn't be easier with the built-in moving magnet phono preamp. The amp delivers an impressive 50 watts/channel, which is plenty of power to drive the majority of loudspeakers on the market.


    Music Hall
    $549.00
    Music Hall A15.3 Integrated Amp Buy Now
  • PS Audio Stellar S300 Stereo Amplifier 2 COLORS AVAILABLE PS Audio Stellar S300 Stereo Amplifier Quick View

    $1,499.00
    Buy Now
    x

    PS Audio Stellar S300 Stereo Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Breathe new life into your loudspeakers with the Stellar S300, one of the most extraordinary under $5,000 stereo power amplifiers ever crafted. The S300 combines the slam, linearity, and toe-tapping pacing of a Class D output stage with the warmth, grace, and rich inner detail of Stellar's Class A Analog Cell. The results are nothing short of ground breaking. Liberate a wealth of untapped energy trapped in your media library. Plumb music's subterranean depths and finally hear the bass your speakers were capable of. Revel in rich layers of fine, full detail. Marvel at the deep, extraordinary, wall-to-wall soundstage. Effortless. Lush. Stellar.


    The problems faced when crafting a new power amplifier are many-delivering sufficient power, control, frequency extension, and dynamics while maintaining a perfectly layered soundstage under the most complex musical passages.


    All amplifiers sound different. What determines sound quality are the components and topologies of the amp's input voltage stage and output current stage. Each section should complement the other. Between them, the amp develops its sound.


    Stellar's design imperatives-affordable pricing, and uncompromised sonics-were major challenges solved by the invention of a unique new circuit christened the Analog Cell.


    Stellar engineer Darren Myers had planned from the outset to take advantage of Class D's high current, low distortion, ruler flat linearity for the output stage-knowing full well it is the input stage that determines sonic character. This critical interface between preamplifier and power amplifier is where Stellar's magic would be unveiled; where Myers could lavish upon the music the sweet, tube-like quality of Class A biased MOSFETs. His challenge was to synergistically marry both input and output topologies, for which he invented Stellar's Analog Cell.


    The Analog Cell is the heart of the S300's musicality, where richly overlayed layers of music's inner details are preserved even in the most complex orchestral crescendos. The Analog Cell is a proprietary, fully differential, zero feedback, discrete, Class A MOSFET circuit, hand-tuned to capture the smallest micro dynamics without sacrificing the loudest macro dynamics music has to offer.


    If you're able to invest in a cost-no-object performance stereo amplifier, you want the BHK Signature 250. For everyone else who refuses to compromise music's promise, Stellar represents breakthrough performance at stellar pricing.


    PS Audio
    $1,499.00
    Power Amplifier - Black or Silver
    Buy Now
  • Audioengine P4 Speakers (Bamboo) Audioengine P4 Speakers (Bamboo) Quick View

    $325.00
    Buy Now
    x

    Audioengine P4 Speakers (Bamboo)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $325.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Bamboo) Buy Now
  • Audioengine P4 Speakers (Satin Black) Audioengine P4 Speakers (Satin Black) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Satin Black)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Satin Black) Buy Now
  • Audioengine P4 Speakers (Hi-Gloss White) Audioengine P4 Speakers (Hi-Gloss White) Quick View

    $249.00
    Buy Now
    x

    Audioengine P4 Speakers (Hi-Gloss White)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $249.00
    Audioengine Premium 4 Passive Bookshelf Speakers (Hi-Gloss White) Buy Now
  • Audioengine HDP6 Speakers 3 COLORS AVAILABLE Audioengine HDP6 Speakers Quick View

    $499.00
    Buy Now
    x

    Audioengine HDP6 Speakers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    There's a lot to like about the AP4s. These mighty mites excel at reproducing voices and instruments in space. Bright highs and uncluttered midrange are two of the speaker's greatest strengths.

    - Audio Video Revolution


    A high-performance bookshelf speaker pair with the same great looks and sound as our powered speakers. Experience the signature Audioengine sound and quality but without our built-in amplifiers. Beautiful, small, and affordable, P4 is the perfect choice for your living room, bedroom or office and an ideal surround speaker for use with other Audioengine speakers in your home theater or stereo system.


    Why passive speakers?

    The P4 passive speakers are full-sounding bookshelf speakers in a satellite-sized package. The goal with P4 was to design a small but powerful bookshelf speaker for people that already have surround receivers or amplifiers and are looking for the same Audioengine sound and quality in a passive loudspeaker.


    Already have an amplifier?

    If you already have an power amp or don't want to give up that big surround receiver then the P4 is for you. The P4 has excellent bass response for its size, which is evident when used either as stereo speakers or as satellite surround speakers in your home theater setup. P4 sounds great sitting on stands, on a bookshelf, or mounted on a wall using the integrated threaded inserts which are compatible with most wall or ceiling mount bracket systems.


    Part of the Family

    Audioengine active and passive speaker models share a similar voicing and overall tuning so that you are assured a matched system no matter which of our speakers or Audioengine wireless adapters you decide to add to your system.


    Versatile

    The P4 passive speakers are perfect for digital hybrid amplifiers (Class-D, Class-T, etc.) as well as most stereo receivers, integrated amps, and tube amplifiers. The P4 has a 4 ohm impedance rating but will sound great when connected to almost any receiver or power amp with 4, 6 or 8 ohm speaker output impedance.


    Hear the Difference

    The Audioengine P4 sets a new level of quality and easy setup. Mount a pair on a wall or stand as surround speakers in a home theater system or place them on a shelf or table for a compact stereo setup. Even if you're not an audio enthusiast we guarantee you will still hear a difference!


    Audioengine Speakers
    $499.00
    Passive Bookshelf Speakers (Pair) - 3 Colors Available
    Buy Now
  • Audioengine D1 DAC Audioengine D1 DAC Quick View

    $169.00
    Buy Now
    x

    Audioengine D1 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Premium 24-bit DAC


    Audioengine D1 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's soundcard or headphone output and send audio through USB or optical. D1 is the perfect digital interface between your computer and music system and will improve the sound of ALL your music.


    Versatile

    The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player. And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.


    Designed for the Computer Audiophile

    D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.


    Easy Setup

    Setup is easy and no special software is needed, making D1 a true plug-and-play solution. The D1 outputs connect to any audio system or powered speakers, such as the Audioengine A5+ or A2. Power for the D1 is provided via the USB bus so there is no external power supply to connect.


    See and Hear the Difference

    Audioengine designers, with their attention to audio quality as well as visual aesthetics, have created a feast for both the eyes and ears. The rounded anodized aluminum case of the D1 reflects traditional Audioengine design and the audio fidelity is typical of Audioengine's commitment to great sound at an affordable price. The Audioengine D1 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $169.00
    Audioengine D1 24 bit Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • Audioengine D3 DAC Audioengine D3 DAC Quick View

    $99.00
    Buy Now
    x

    Audioengine D3 DAC


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audioengine D3 Premium 24-bit DAC


    - Connect D3 to a USB port on your Mac or PC and send high-quality music to your headphones or any audio system.

    - D3 includes a USB DAC and headphone amplifier for incredible audio performance in a portable design.

    - Audioengine D3 is the perfect intro to computer audio!


    The Audioengine D3 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's headphone output and send music directly through a USB port for noticeably improved fidelity and a higher output. The D3 is a powerful yet portable converter with performance and features usually found in more expensive DACs and is the perfect interface between your computer and headphones or any music system.


    Easy setup

    Setup is easy and no special software is needed, making D3 a true plug-and-play solution. The D3 plugs directly into a USB port on your computer so no external power supply or cables are needed. The output of the D3 connects to headphones, Audioengine powered speakers, or any audio system. The D3 also has a sample rate indicator that shows sample rates above 48K so you'll know you're getting the most out of your HD music.


    Versatile

    The quality of most computer headphone outputs isn't generally very inspiring, so the D3 provides a better option by streaming audio from your computer's USB port and directly connecting to your music system or headphones. The D3 DAC is the perfect way to get great-sounding music not only from your computer to headphones but also from your computer to any music system.


    Designed for the headphone enthusiast

    D3 will process digital audio at any bit depth up to 24 bits and any native sample rate to 96KHz. With it's high signal-to-noise ratio and low distortion, the D3 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone amplifier was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiast with its high output and revealing sound. The D3's asynchronous data transfer carefully controls USB streaming audio from any computer which greatly improves audio performance.


    See and hear the difference

    The aluminum case of the D3 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine's commitment to great sound at affordable prices. The Audioengine D3 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!


    Audioengine
    $99.00
    Audioengine D3 Premium Portable 24 bit USB Digital-to-Analog Converter (DAC) + Headphone Amp Buy Now
  • Audioengine HD3 Speakers 3 COLORS AVAILABLE Audioengine HD3 Speakers Quick View

    $399.00
    Buy Now
    x

    Audioengine HD3 Speakers


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The ultimate personal music system

    The Audioengine HD Series was designed for the way people listen to music today and HD3 raises the bar and sets a new standard for compact mini music systems. HD3 fits just about anywhere you listen and was designed to play all your music from any device. Easy setup, simple but useful features, and real stereo sound make HD3 the go-to system for all your music!


    Today's music is available from many different sources including computers, tablets, smartphones, and turntables. HD3 is designed with multiple inputs to accommodate all of these digital and analog sources. HD3's Bluetooth receiver, which supports aptX and AAC codecs, has a range of about 100 feet so you can stream all your music from almost anywhere in your house. Its USB input bypasses your computer's lower-quality DAC for a high-fidelity listening experience. Lastly, dual analog inputs round out the HD3's impressive suite of connections.


    Versatile connectivity

    In the spirit of the HD Series, we've included features from some of our best-selling products making HD3 an incredibly versatile speaker system. Stream TIDAL, Spotify, Pandora, YouTube - or any other streaming service or media player - wirelessly from your smartphone, tablet or computer. You can also connect your favorite turntable and even connect a subwoofer, so no matter how you listen to music, HD3 has you covered.


    All your music, day and night

    HD3 includes a headphone output and volume control on the front panel so you can listen to your favorite headphones without disturbing the neighbors or significant other. HD3's built in headphone amplifier delivers a high-end sound that is a perfect match with even the most-demanding headphones.


    Retro-forward design

    HD3 was designed first for audio performance, but speakers also need to look great, right? The furniture-grade wood veneers, aluminum trim accents, and detachable magnetic grills give the HD3 a look and feel of old-school elegance that blends with any decor. Available in Satin Black for your stealth system as well as Walnut and Cherry wood finishes at no additional cost if you want to really show them off.


    Small speakers that pack a punch

    Built-in power amplifiers save space and eliminate the need to connect HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right passive speaker. All internal components of the HD3 are designed and tuned together, so you'll get Audioengine's Signature Sound and a much more efficient system than traditional separate passive speakers and amplifiers.


    Audioengine Speakers
    $399.00
    Powered Speakers (Pair) - 3 Colors Available
    Buy Now
  • Marantz HD-AMP1 Digital Integrated Amplifier Marantz HD-AMP1 Digital Integrated Amplifier Quick View

    $1,099.00
    Buy Now
    x

    Marantz HD-AMP1 Digital Integrated Amplifier


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    HD-AMP1 Digital Integrated Amplifier with USB-DAC


    Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).


    The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.


    Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.


    Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.


    The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.


    There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.


    The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.


    Marantz
    $1,099.00
    Digital Integrated Amplifier Buy Now
Go to top