Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - 20% Off Vinyl Orders 100+
Home > Products for: '

Rega

'
Results per page:
  • Rega Planar 1 Turntable 4 OPTIONS AVAILABLE Rega Planar 1 Turntable Quick View

    $475.00
    Buy Now
    x

    Rega Planar 1 Turntable

    40th
    What


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Welcome the Rega Planar 1, the best offering in entry level audiophile turntables.


    The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.


    Performance beyond price

    Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.


    If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.


    Features:


    • Plug and Play design, set-up in less than thirty seconds.
    • Hand assembled RB110 tonearm.
    • High quality, low vibration motor.
    • Phenolic resin, flywheel effect platter.
    • Factory fitted Carbon moving magnet cartridge.
    • Performance Pack upgrade available (optional).

    The Performance Pack Kit Includes:

    • Rega-built Bias 2 MM cartridge
    • thick black 100% wool platter mat
    • reference drive belt (the white belt)

    Free installation of the Performance Pack upgrade is optional.


    Rega Turntables
    $475.00
    Planar Turntable - Black or White - Performance Pack Option
    Buy Now
  • Rega Planar 6 Turntable 3 OPTIONS AVAILABLE Rega Planar 6 Turntable Quick View

    $1,595.00
    Buy Now
    x

    Rega Planar 6 Turntable



    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Rega Turntables
    $1,595.00
    Planar 6 Turntable - Cartridge Options
    Buy Now
  • Rega Planar 6 Turntable with Exact Cartridge (Certified Pre-Owned) Rega Planar 6 Turntable with Exact Cartridge (Certified Pre-Owned) Quick View

    $1,695.00
    Buy Now
    x

    Rega Planar 6 Turntable with Exact Cartridge (Certified Pre-Owned)



    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Certified Pre-Owned


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Demo Discounts
    $1,695.00
    Certified Pre-Owned Turntable Buy Now
  • Rega Planar 3 Turntable 9 OPTIONS AVAILABLE Rega Planar 3 Turntable Quick View

    $945.00
    Buy Now
    x

    Rega Planar 3 Turntable

    40th
    5


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took a team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'three' model ever seen.


    The Rega team has worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new 'Planar 3' is truly a new turntable for 2016 carrying over just two components from the previous model.


    New features of the Planar Three:


    RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.


    • Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
      arm clip and an improved spring housing with easier to read numbers.
    • Rega made, new low capacitance phono cable with Neutrik plugs,
    • Improved lower friction, precision horizontal and vertical bearings
    • New design 100g mild steel balance weight.


    Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white


    Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.


    Bearing housing - Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.


    Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.


    Platter - New float glass 'Optiwhite' polished rim 12mm - Improved accuracy in manufacture and stunning looks.


    Re-designed foot - New improved foot to increase stability and reduce vibration transfer.


    24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).


    Motor cover tray with integrated cooling.


    DB Technology (Double Brace Technology)

    Mass absorbs energy - lost energy equals lost music!


    Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic original Planar range.


    The new Planar 3 takes this design philosophy to the next level. A lightweight acrylic laminated plinth strengthened using a new improved double brace system mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) which forms a structurally sound stressed beam assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music.


    Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.


    Hand assembled RB330 tonearm.

    24v low noise motor / 12mm float glass platter.

    Lightweight double braced plinth.

    Precision main bearing.

    Factory fitted Elys2 MM cartridge or mounted with Ortofon 2m Blue cartridge (optional).

    Compatible with the TT-PSU electronic speed change and power supply box (optional).


    Rega Turntables
    $945.00
    Planar Turntable - Black, White, or Red - Cartridge Options
    Buy Now
  • Rega RP8 Turntable - No Cartridge Rega RP8 Turntable - No Cartridge Quick View

    $2,995.00
    Buy Now
    x

    Rega RP8 Turntable - No Cartridge

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP8 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP8 turntable. A turntable which takes Rega's design philosophy further than ever before. A radical new plinth using custom designed materials, a new tonearm bearing assembly, 24v low volt-age motor controlled by a hand tuned electronic power supply and a custom version of our Planar 9 engineered hub bearing assembly. These are just some of the features of this amazing new turntable designed to extract more music from your vinyl than ever before.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP8 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    The RP8 is the first of our new "skeletal" design turntables offering groundbreaking levels of performance and amazing value for money.


    The RP8 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    Only available in black


    Rega Turntables
    $2,995.00
    Rega RP8 - No Cartridge Buy Now
  • Rega Elex-R Amplifier Rega Elex-R Amplifier Quick View

    $1,695.00
    Buy Now
    x

    Rega Elex-R Amplifier

    40th



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Elex-R is a sublime blend of the Brio-R design with the power circuits and advanced phono stage of the Elicit-R. Rega's engineers have achieved the perfect balance of power, control and dynamics, delivering a performance that always puts the music first.


    You will find plenty of connectivity options allowing complete flexibility and integration within the rest of the Rega range.


    Design Innovation


    The Elex-R is built to the highest standard and designed to deliver the best possible audio performance whilst remaining simple to use and easy to setup.The Elex-R is built into the full width Rega case with increased heat dissipation, which along with a larger transformer enables the Elex-R to deliver 90 Watts per channel into 6 and 72.5 Watts per channel into a design centre rating of 8.


    Our time, effort & money have been spent on developing the circuit and construction utilizing the highest specification of components throughout. As part of the design we have included useful features like pre-amplifier output, to enable the new Elex-R amplifier to be used in a wide combination of systems and have avoided superfluous gadgets such as tone controls or a headphone socket as they can obstruct the signal path and degrade the produced sound quality.


    The Elex-R has been built to Rega's extremely high standards of reliability and quality to ensure many years of musical enjoyment. The primary function of an amplifier is to boost and equalize the low level signal generated by a phono cartridge, DAC and CD player or other source component to a level that can drive the loudspeakers. It is vital that the amplifier achieves this whilst minimising distortion, as this would directly affect the music. The distortion level is typically 0.007%; just under the clipping of the output.


    The volume control and pre-amplifier used in the Elex-R is designed to overcome the problems associated with the standard arrangement. This design uses a custom chip along with peripheral support IC's like a microcontroller and a custom made rotary volume control.


    The Elex-R uses a combined feedback and passive volume control, where the feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum.As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only 'use' the required gain to amplify the signal.This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required.


    Power Amplifier Technology


    The output amplifier used in the Elex-R, Elicit-R and Brio-R was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around a complementary pair of 150w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current) this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability with lower standing.


    Rega Integrated Amps
    $1,695.00
    Rega Elex-R Amplifier Buy Now
  • Rega Performance Pack Rega Performance Pack Quick View

    $195.00
    Buy Now
    x

    Rega Performance Pack

    The Performance Pack is designed for use with the RP1 turntable. It includes the Rega Bias 2 moving magnet cartridge, upgrade drive belt and a high performance 100% natural wool turntable mat usually supplied with the P3,P5 and P7. Also included is a cartridge alignment protractor for use when fitting the cartridge.


    *Upgrade drive belt

    The increased drive delivered by the upgrade belt offers greater speed stability and accuracy. This is especially noticeable during long musical notes which adds greatly to the musical performance of the turntable.


    *Bias 2 cartridge

    A hand assembled moving magnet cartridge which uses a high quality elliptical stylus and parallel wound coils that would usually be found in cartridges costing many times the amount. Housed in Regas unique lightweight high rigidity cartridge body the Bias 2 offers a detailed, balanced performance with tight bass and excellent stereo imagery.


    *Turntable Mat

    A high quality mat manufactured from 100% natural wool. Wool having stiffer fibres than synthetic man made material directly improves coupling between the phenolic resin platter and the vinyl LP.


    *Plug & Play

    Setting up your RP1 takes seconds, push the balance weight all the way to the end stop, this will automatically set the tracking weight to the desired setting for the Rega Bias 2.

    Rega
    $195.00
    RP1 Performance Pack Buy Now
  • KAB Super Record Grip - Push On Record Clamp (On Sale) KAB Super Record Grip - Push On Record Clamp (On Sale) Quick View

    $38.00
    Buy Now
    x

    KAB Super Record Grip - Push On Record Clamp (On Sale)

    The newly redesigned KAB super record grip was designed to replace and improve upon the PIG clamp originally supplied with the Revolver brand turntables. This new design features a 2 piece precision molded frame, spring rubber insert and UHMW polyethylene non marring contact surface. This is especially useful on Rega brand turntables and others where there is very little spindle to grab on to.


    The KAB Super Record Grip reduces resonance and acoustic vibration of the record itself, freeing the stylus to do its intended job of tracing the groove. The result is better focus and detail to the soundstage.


    The Super record grip attaches quickly; by turning with slight pressure, it walks down the spindle and meets the record surface.


    Note: For easier use, the center hole can be lubricated with a diluted solution of 5% Armor All® and alcohol, swabbed with Qtip®.


    The built-in bubble level shows turntable level at a glance to within 1 degree of accuracy.


    Spring reinforced rubber insert holds onto the turntable spindle firmly.


    The built in bubble level allows a quick check of turntable level. A level turntable balances the forces of the needle in the groove.


    When the needle is resting in the record groove, the entire record surface behaves as a microphone picking up vibrations from the air and the turntable below. Damping the record surface reduces the affect of these added vibrations to the needle's already difficult job of reading the groove.


    The really great features to take note of with the KAB super record grip is the ease of use and cost effectiveness.


    The super record grip represents great value. Yet it is quite good at what it does and even has the added benefit of showing level at a glance, each time you use it. Keeping with the KAB philosophy that more is better, but it needn't cost more!


    One issue to be sensitive to is turntables with light floating spring suspensions. You will have to push down some while applying the super record grip. It does not rely on weight. (It only weighs 2 Oz) Be sure your turntable can Bottom Out safely. If this is a concern, consult your turntable maker first.


    [In our opinion, if you can bottom out safely, the super grip is a better solution still over clamps that rely on weight, since they will change the operating height of your platter.]

    KAB Electro-Acoustics
    $38.00
    Record Clamp Buy Now
  • Rega Planar 2 Turntable 6 OPTIONS AVAILABLE Rega Planar 2 Turntable Quick View

    $675.00
    Buy Now
    x

    Rega Planar 2 Turntable

    40th
    WhatThe


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The new Planar 2 was developed over the past two years alongside the recently released Planar 3. Featuring the brand new RB220 tonearm which is packed with groundbreaking new features.


    A new 24v, low noise motor, acrylic laminated plinth, newly designed central bearing and so much more. Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection.
    Tonearm - Featuring the brand new RB220 tonearm which is packed with groundbreaking new features. Incorporating new ultra low friction, Rega designed, bespoke, zero play ball bearings (Patent Pending), housed within a brand new, stiffer and lightweight bearing housing which was developed with a new automatic bias setting negating the need for the user to set bias, making it almost completely plug and play apart from simple arm balancing. The new housing also includes an integrated arm clip and uses Rega's latest custom aluminium arm tube.


    Hub bearing - The Planar 2 has a new 11mm self securing brass bearing (Patent Pending) offering improved fit and less stress on the bearing preventing the transfer of potential energy.


    Plinth - High gloss acrylic laminated plinth, stiffer and vastly improved appearance with ergonomically positioned power switch. Two plinth finishes at launch: gloss black & gloss white


    Motor - New 24v low noise, low vibration motor assembly and new PCB.


    Platter - New float glass 'Optiwhite' 10mm - Improved accuracy platter.


    Other features :


    • Re-designed feet - New improved foot assembly to increase stability and reduce vibration transfer.
    • Carbon cartridge - supplied as standard on all Planar 2's for simple plug and play convenience.
    • Motor cover tray - with integrated cooling.
    • Optional lid / plinth protectors - supplied to prevent marks on the plinth and keep it looking its best.
    • Instructions - Easy to use multi-lingual quick start guide for easy set up.
    • Packaging - New improved packaging.


    The Performance Pack Kit Includes:


    • Rega-built Bias 2 MM cartridge
    • thick black 100% wool platter mat
    • reference drive belt (the white belt)

    Free installation of the Performance Pack upgrade is optional.


    Rega Turntables
    $675.00
    Planar Turntable - Black, White, Or Red - Performance Pack Option
    Buy Now
  • Rega Fono MC Rega Fono MC Quick View

    $495.00
    Buy Now
    x

    Rega Fono MC



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    NEW REGA FONO MC PLAYS THE PERFECT PARTNER


    Having recently launched the new Ania moving coil cartridge, Rega has set their minds to the perfect pairing of phonostage. Fono MC is crafted to be that partner, giving users an ideal phono pre-amp that matches Ania's electrical characteristics perfectly. Housed in a sleek new case that matches the look of the 2017 Brio amplifier, Fono MC makes a great shelf-mate too. The sound of Fono MC is quiet, detailed, insightful, dynamic, and well-timed.


    While Fono MC has the ideal settings for Rega moving coil cartridges, it is fully adjustable ensuring that its plays very well with pretty much any other MC cartridge on the market. With 2 gain, 2 capacitance, and 4 resistance settings, it can be finely tailored to suit your cartridge's needs and your listening tastes.


    Borrowing heavily from its big brother Aria phonostage, Fono MC uses low-noise, high-impedance FETs that minimize negative interactions from the cartridge. RIAA equalization is handled by MUSE op-amps, similar to those in the Brio amp. High-quality polypropylene capacitors are used in the signal path for excellent linearity. The casework is aluminum that best shields the sensitive internal circuits. Power is supplied by a 24VAC wall-wort, further minimizing negative interactions and noise.


    Rega
    $495.00
    MC Phono Stage Buy Now
  • Rega Brio Integrated Amplifier Rega Brio Integrated Amplifier Quick View

    $995.00
    Buy Now
    x

    Rega Brio Integrated Amplifier




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Brio has a completely new case to house its improved circuits and parts. It now sits in a fully aluminium two-part case which boosts the Brio's heat sinking capabilities and improves on Rega's already solid build quality and reliability. The new Brio has a cleverly integrated headphone socket specially designed to avoid interference with the audio circuit when not in use and as you would expect, a very high specification moving magnet phono stage is built in as standard.


    Throughout the design process the Brio has been meticulously improved in every aspect, from the quality of materials to the manufacturing process, to make this new Brio a step ahead in Rega's engineering and design for amplifiers.


    Brand new case design.

    The sleek and minimal look was designed to bring elegance to Rega's classic style but still harks back to the swooped features hidden away in Rega's past amplifiers. Combining all these aspects makes this Brio case a unique standpoint amongst the competition.


    Re-designed circuit.

    Key improvements have been made to the circuits. The PCB layout has been fully upgraded to handle higher specifications for all critical parts. A second raw power supply has been added to provide further isolation between output stage and the driver stage/line and phono amplifiers. This improves the isolation between high and low level signal stages of the amplifier. Higher specification MUSES operational amplifiers have been used in the line and phono amplifier.


    Headphone Socket.

    For convenience, the Brio has the capability to drive standard hi-fi headphones from the internal amplifier. Adding a headphone socket was only possible by finding a way to reduce its impact on the main signal path so it doesn't disrupt the overall sound quality. We have paid special attention to the switch that deactivates the main speakers.


    Rega
    $995.00
    Brio Integrated Amplifier Buy Now
  • Rega RP10 Turntable with Apheta 2 Cartridge (Open Box) Rega RP10 Turntable with Apheta 2 Cartridge (Open Box) Quick View

    $5,020.99
    Buy Now
    x

    Rega RP10 Turntable with Apheta 2 Cartridge (Open Box)

    40th




    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    RP10 with Apheta 2 Cartridge

    Demo Discounts
    $5,020.99
    Rega RP10 with Apheta 2 Cartridge (Open Box) Buy Now
  • Rega RP8 Turntable - Apheta 2 Cartridge Rega RP8 Turntable - Apheta 2 Cartridge Quick View

    $4,195.00
    Buy Now
    x

    Rega RP8 Turntable - Apheta 2 Cartridge

    40th



    Rega Made


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes with Apheta 2 moving coil cartridge - factory fitted!


    The Rega RP8 turntable takes Rega's design philosophy further than ever before. Meticulously hand-built details and obsessive attention to reducing all sources of distortion are focused in a 24v low voltage motor controlled by a hand-tuned electronic power supply, a radical new high-rigidity plinth using custom designed materials, high flywheel effect platters and a new lower-mass higher-stability tonearm bearing assembly. Add to that a custom version of Rega's Planar 9 engineered hub bearing assembly and this design allows you to extract even more music and sound from your vinyl. Rega's keen eye for practicality also includes incorporating a dust cover into a skeletal design.


    The RP8 is the first of Rega's skeletal design turntables to combine excellent value with groundbreaking levels of performance. Over forty years of experience culminate in the incredible features of the RP8, and in 2013 it was voted one of the best designs of all time by Apple's Sir Jony Ive and Marc Newson, two of the world's most respected designers.


    Only available in Black.


    Rega Turntables
    $4,195.00
    Rega RP8 - Apheta 2 Cartridge Buy Now
  • Rega Neo PSU Turntable Power Supply (Standard) Rega Neo PSU Turntable Power Supply (Standard) Quick View

    $395.00
    Buy Now
    x

    Rega Neo PSU Turntable Power Supply (Standard)

    40th


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.


    The Neo PSU Standard is compatible with the following Rega turntable models:
    P7 / RP40 Special Edition / RP6 / RP8 / or any model that originally came with the TTPSU as standard.


    (For P3-24 / RP3 / Planar 3 2016 / P5 / Or any older Rega turntable fitted with a 24v motor upgrade kit: purchase this model.)


    Using the same DSP (digital signal processing) generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst will producing a near perfect sinusoidal waveform to drive the 24v motor.



    Rega
    $395.00
    Turntable Power Supply - See Compatible Models Buy Now
  • Rega Stainless 3-Point Spacer Rega Stainless 3-Point Spacer Quick View

    $39.00
    Buy Now
    x

    Rega Stainless 3-Point Spacer

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    2 mm spacer fits RB100/101/110/202/220/251/301/ 303/330/700/808/900/1000/2000


    Allows for VTA adjustment when using nonfactory cartridges

    Rega
    $39.00
    Rega Stainless Steel Spacer - 2 mm Buy Now
  • Rega Isis CD Player Rega Isis CD Player Quick View

    $9,995.00
    Buy Now
    x

    Rega Isis CD Player

    40th


    2010



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Introducing the Rega ISIS flagship CD player


    We are very proud to introduce the 7th generation of Rega CD player.


    A product manufactured to the highest achievable quality inside and out, Rega's own unique CD technology, genuine black chrome lid and front facia, a custom solid anodised aluminium case weighing in at a notable 19kg! We hope you enjoy this very special CD player; we have spent a very long time creating it, drawing on our many years of experience in specialist Hi-Fi manufacturing.


    Technology behind the design of the Isis


    One important design goal was to take the current output, with no internal amplification within the D to A converter, and convert this to an analogue voltage, using discrete class A operational amplifiers and filters. This circuit can then be optimised for sonic performance. (With most CD players the use of standard operational integrated circuits locks you into the sound of those particular integrated circuits, thus narrowing the scope for improvement).


    The class A current to voltage conversion amplifier evolved out of the development of the first stage of the Rega IOS MC amplifier.


    It shares identical demands of low noise, high drive capability and gain bandwidth required of the voltage to current amplifier.


    Careful choice has been made for every component in the digital and the analogue signal path to ensure the integrity of the signal.


    The analogue and digital sections are bonded together using a substantial ground plane. It was found during the development of the player that
    adoption of RF ground plane techniques aided the sonic quality and therefore were included in the final design.


    Careful design of the PCB's ensures isolation of not just the digital and analogue sections, but also the motor, display and user interface processor.


    All sonically critical electrolytic capacitors have been by-passed with polypropylene or polyester film capacitors. In addition to this, large value electrolytic capacitors have also been by-passed with audio grade electrolytic capacitors.
    Power supply impedances in the digital to analogue converter are kept very low by the use of solid polymer capacitors.


    All power supplies utilise custom Rega K-Power smoothing capacitors, along with fast diodes which have been used throughout in power supply rectification.


    The Isis uses enhanced and optimised control code for the control of the CD processor and user display.This speeds up the initialisation process by means of a tighter control interface between the user micro and CD processor.


    Analogue section


    The analogue section employs two Burr Brown PCM1794 digital to analogue converters, running in a parallel dual mono mode, driving a high performance discrete class A current to voltage amplifier.


    This combination generates an exceptionally wide dynamic range, low distortion, and linear signal. This drives an enhanced discrete class A output amplifier. The circuit is fully balanced from the digital to analogue converters to the balanced analogue XLR outputs. The analogue stage has its own dedicated 50VA mains transformer which ensures galvanic isolation between the digital and analogue sections of the player. You will find 10 separate power supply regulators are used in the analogue circuit and each individual amplifier stage has its own dedicated low noise voltage reference.


    Digital section


    The digital section is blue printed and selected, with major improvements to the mechanism, optical amplifier, DSP core, PLL, master clock & motor power supplies. Another 10 separate power supply regulators are used in the digital circuit. The motor, user interface processor & display also have their own power supply. The digital stage also has its own 50VA transformer again ensuring galvanic isolation. The mechanism is graded and matched to the servo circuits, to ensure the servo and optical amplifiers are working at their optimum point, improving error correction and playability. The headroom of the optical amplifier has been improved by 10% by increasing the voltage in the power supply.


    Digital


    This revolutionary player has been five years in design. Rega, together with its design partners have pioneered a highly advanced servo controller that uses the latest signal processing techniques to ensure that the raw data that is recovered from the disc is of the very highest quality. Because our fully digital servo can use highly advanced algorithms the laser spot is kept in the optimum position for data recovery in terms of focus, size and tracking.


    Extra Error Correction


    Previous chip-sets always made compromises on error correction. Formerly it was possible to have good jog resistance or better musical performance.
    The Rega chip-set allows optimum musical performance and optimised jog /vibration resistance.


    Super-stable phase lock loop


    The entire IC is clocked via a very special PLL of our own design. This allows better CD data recovery as well as a big improvement in the quality of the data delivered to the DAC.


    Low noise digital design


    In the design of our CPU IC we went to great lengths to ensure that the data and address bus noise was kept to an absolute minimum. This ensures the ground and signal connections to the DAC are as 'clean' as is possible.


    USB Input


    Allowing direct connection to a laptop or PC via a USB A-B lead to stream internet radio Mp3 or WMA files directly from your computer via the high quality ISIS internal DAC.


    The USB input uses an isolated double-clocked USB interface, which permits the digital to analogue stage to be used with a computer USB interface and it's own regulated power supply.


    The USB benefits once again from galvanic isolation from the main circuitry of the ISIS player which eliminates the flow of earth currents between the CD and host computer, and eliminate computer power supply noise.


    Disc Analysis


    The ISIS will analyse each disc on an individual basis. During the initialising period (rather like the engine management system on a modern car which optimises the engine settings to temperature, fuel quality etc.) the ISIS will adjust itself to each disc in order to give optimal trouble free reading. For this reason the ISIS will often play discs with marks or scratches that other players cannot read.


    All these features amalgamate to create the supreme level of performance found in the Isis and provide a perfect partner for the Rega Osiris amplifier.


    Rega
    $9,995.00
    Rega Isis CD Player Buy Now
  • Rega Ania MC Cartridge Rega Ania MC Cartridge Quick View

    $795.00
    Buy Now
    x

    Rega Ania MC Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    ANIA, REGA'S FIRST FORAY INTO THE WORLD OF BUDGET MC CARTS, IS REVOLUTIONARY JUST LIKE ITS BIG BROTHERS.


    APHETA, A BRIEF HISTORY:


    When Rega first announced the original Apheta in 2006, it changed the way people looked at the design of moving coil cartridges. Crafted without the tie-wire that plagued most every other MC cartridge, Apheta was iconoclastic like many Rega products. It was fast, clear, dynamic and insightful, garnering praise in many quarters of the high-end audio world. In 2015 and 2016, respectively, Rega pushed forward with new designs that brought about the reference Aphelion ($4995) and reborn Apheta 2 ($1895). These two carts are based on the original concepts but with the benefit of almost 10 years of experience and a complete overhaul of the cartridge manufacturing facilities. Now, Rega can build moving coil cartridges with a level of precision, speed, reliability, and height of technology they could only dream about way back when.


    ANIA, MOVING FORWARD:


    Having surmounted the challenge of perfecting the original and expanding their horizons, Rega set their eyes on fashioning a moving coil cartridge for less than half the price of the Apheta 2. Now, your first thought might be there's no way to preserve quality while lowering the price, and if this weren't Rega you might be right. But they are who they are, 40+ year specialists at making things better and more reasonably priced.


    Rega leaned hard on its engineers' expertise and that of their suppliers. The first challenge was to construct a new cartridge body that preserved that benefits and lowered the cost from the aluminum-bodied Apheta 2, a marvel in its own right. Here, computer modeling and expert tool making allowed Rega to build a body from PPS-Fortron, a sophisticated polymer-glass amalgam, that has a complex shape, keeping strength high, mass low, and unwanted resonances to an absolute minimum. The result is simply astonishing.


    Of course, Ania would not be a Rega moving coil if not for its unique tie-wire-less design. The tie-wire was originally conceived as a method to secure the cantilever, but this introduces nasty resonances that have to tuned-out with the undesired after effect of reducing detail and speed, unfortunately. Being the curious types and unwilling to compromise, Rega's engineers sought out a method that eliminates the pesky tie-wire. Thus was born the pivot pad, a rhomboid-shaped device that positively locates the cantilever, adds zero mass, improves strength, and allows free movement so that the stylus can more accurately track the groove. Brilliant!


    The generator of Ania is then formed by a floating iron cross attached to the inner tip of the cantilever, hand-wound with incredibly fine ultra-high purity copper wire. This iron cross is some 50% smaller than the original Apheta, making it one of the smallest, lightest weight generators in the world! These parts, including the high-power neodymium magnet, are borrowed directly from the doubly-priced Apheta 2. An elliptical stylus tops off the lightweight aluminum cantilever, while a CAD-designed plastic case protects the delicate internals from prying fingers and well-meaning feather dusters.


    All in all, the new Rega Ania moving coil cartridge demonstrates precisely what makes Rega great- unique solutions to age-old dilemmas, a commitment to quality, commanding performance, and a reasonable price. Did we mention, it's all still built in the UK?

    Rega Cartridges
    $795.00
    Moving Coil Cartridge Buy Now
  • Rega EXACT Cartridge Rega EXACT Cartridge Quick View

    $595.00
    Buy Now
    x

    Rega EXACT Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Design


    The Exact shares the same body moulding as the rest of the Rega cartridge range. This is a one piece body and has no energy sapping joints between the stylus mounting and headshell contact face. The headshell face is machined perfectly flat to ensure
    maximum contact between cartridge and headshell.


    Coil Winding


    Rega have designed and developed its own coil winding machine. This allows us to manufacture coils in a completely new and innovative way. This means approximately one third less wire is used than in our other cartridges, making the Exact even more
    efficient than the Elys.


    Cantilever


    The Exact has a highly expensive non removable cantilever, fitted with a "Vital" diamond tip. This tip fits into the record groove more precisely than the usual elliptical type, allowing more information to be gleaned from the records.


    Assembly


    Because of the design and extremely high tolerances of Rega cartridges, our assembly methods owe more to watch making than the assembly line. Every one is hand built, and the highly skilled operatives use little more than tweezers and microscopes. Each
    cartridge is then adjusted and tested twice over a 24 hour period. Such methods are expensive and time consuming but we feel the results are worth it. We hope you do too!

    Rega Cartridges
    $595.00
    Rega EXACT Cartridge Buy Now
  • Rega Elys 2 Cartridge Rega Elys 2 Cartridge Quick View

    $295.00
    Buy Now
    x

    Rega Elys 2 Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Rega Elys 2 is a Moving Magnet cartridge that uses uses an elliptical diamond stylus. Offering outstanding sound quality, this cartridge is highly recommended for any turntable, but is the perfect choice for your Rega turntable!


    Innovation


    Recent developments in coil winding techniques have allowed us to use our innovative parallel wound coil in our entire range. This technique uses approximately one third less wire than our previous models, thus producing a more efficient and reduced mass cartridge.


    About Rega Cartridges:


    Rega have worked hard on extracting even more performance from the new range of cartridges - generating superior sound and dynamic quality at no extra cost over their predecessors.


    Rega have improved production methods utilizing new technology which has become available. All you have to do is listen!

    Rega Cartridges
    $295.00
    Rega Elys 2 Cartridge Buy Now
  • Rega RX5 Speakers - Walnut Rega RX5 Speakers - Walnut Quick View

    $2,995.00
    Buy Now
    x

    Rega RX5 Speakers - Walnut


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    RX FIVE Loudspeaker system. Designed and Made in England.


    Rega Speakers
    $2,995.00
    Rega RX5 Speakers - Walnut Buy Now
  • Rega Turntable Mat - Black Rega Turntable Mat - Black Quick View

    $30.00
    Buy Now
    x

    Rega Turntable Mat - Black

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Black Turntable Mat!


    Now you can customize the look of your Rega turntable with a unique, colored mat!


    The turntable mats are made from 100% wool.


    They are 2 mm in thickness.


    Suitable for use with the Rega P2, P3, P5 and P7 turntables.


    These mats are NOT suitable for use with the P9 turntable.

    Rega
    $30.00
    Rega Turntable Mat - Black Buy Now
  • Rega RP10 Turntable (With Cartridge) Rega RP10 Turntable (With Cartridge) Quick View

    $6,695.00
    Buy Now
    x

    Rega RP10 Turntable (With Cartridge)

    40th



    Rega Made


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Factory Fitted With Apheta 2 Moving Coil Cartridge


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    >

    Rega Turntables
    $6,695.00
    Rega RP10 - Apheta 2 Cartridge Buy Now
  • Rega Neo PSU Turntable Power Supply Rega Neo PSU Turntable Power Supply Quick View

    $395.00
    Buy Now
    x

    Rega Neo PSU Turntable Power Supply

    40th


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change. The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.


    The Neo PSU is compatible with the following Rega turntable models: P3-24 / RP3 / Planar 3 2016 / P5 / Or any older Rega turntable fitted with a 24v motor upgrade kit.


    (For P7 / RP40 Special Edition/ RP6 / RP8 / or any model that originally came with the TTPSU as standard: purchase this model.)


    Using the same DSP (digital signal processing) generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst will producing a near perfect sinusoidal waveform to drive the 24v motor.



    Rega
    $395.00
    Turntable Power Supply Buy Now
  • Rega Turntable Mat - Red Rega Turntable Mat - Red Quick View

    $35.00
    Buy Now
    x

    Rega Turntable Mat - Red

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Red Turntable Mat!


    Now you can customize the look of your Rega turntable with a unique, colored mat!


    The turntable mats are made from 100% wool.


    They are 2 mm in thickness.


    Suitable for use with the Rega P2, P3, P5 and P7 turntables.


    These mats are NOT suitable for use with the P9 turntable.

    Rega
    $35.00
    Rega Turntable Mat - Red Buy Now
Go to top