Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - LP10
Home > Products for: '

Rp1

'
  • 1
Results per page:
  • Rega Planar 1 Turntable 4 OPTIONS AVAILABLE Rega Planar 1 Turntable Quick View

    $475.00
    Buy Now
    x

    Rega Planar 1 Turntable

    40th
    What


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Welcome the Rega Planar 1, the best offering in entry level audiophile turntables.


    The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.


    Performance beyond price

    Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega's bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.


    If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.


    Features:


    • Plug and Play design, set-up in less than thirty seconds.
    • Hand assembled RB110 tonearm.
    • High quality, low vibration motor.
    • Phenolic resin, flywheel effect platter.
    • Factory fitted Carbon moving magnet cartridge.
    • Performance Pack upgrade available (optional).

    The Performance Pack Kit Includes:

    • Rega-built Bias 2 MM cartridge
    • thick black 100% wool platter mat
    • reference drive belt (the white belt)

    Free installation of the Performance Pack upgrade is optional.


    Rega Turntables
    $475.00
    Planar Turntable - Black or White - Performance Pack Option
    Buy Now
  • Rega Performance Pack Rega Performance Pack Quick View

    $195.00
    Buy Now
    x

    Rega Performance Pack

    The Performance Pack is designed for use with the RP1 turntable. It includes the Rega Bias 2 moving magnet cartridge, upgrade drive belt and a high performance 100% natural wool turntable mat usually supplied with the P3,P5 and P7. Also included is a cartridge alignment protractor for use when fitting the cartridge.


    *Upgrade drive belt

    The increased drive delivered by the upgrade belt offers greater speed stability and accuracy. This is especially noticeable during long musical notes which adds greatly to the musical performance of the turntable.


    *Bias 2 cartridge

    A hand assembled moving magnet cartridge which uses a high quality elliptical stylus and parallel wound coils that would usually be found in cartridges costing many times the amount. Housed in Regas unique lightweight high rigidity cartridge body the Bias 2 offers a detailed, balanced performance with tight bass and excellent stereo imagery.


    *Turntable Mat

    A high quality mat manufactured from 100% natural wool. Wool having stiffer fibres than synthetic man made material directly improves coupling between the phenolic resin platter and the vinyl LP.


    *Plug & Play

    Setting up your RP1 takes seconds, push the balance weight all the way to the end stop, this will automatically set the tracking weight to the desired setting for the Rega Bias 2.

    Rega
    $195.00
    RP1 Performance Pack Buy Now
  • Klipsch Reference Premiere Monitor Speaker RP-150M (Pair) 2 Colors Available Klipsch Reference Premiere Monitor Speaker RP-150M (Pair) Quick View

    $419.00
    Buy Now
    x

    Klipsch Reference Premiere Monitor Speaker RP-150M (Pair)


    The Reference Premiere RP-150M monitors feature copper Cerametallic™ woofers and a Hybrid Tractrix® Horn to deliver an unrivaled listening experience.


    90x90 Hybrid Tractrix Horn

    Tactrix® horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while intensifying imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most pure sound possible.


    Linear Travel Suspension (LTS) Titanium Tweeter

    Linear travel suspension minimizes distortion for enhanced, detailed performance. LTS tweeters have been a hallmark of previous reference lines, making it a core component of some of the world's best speakers.


    Spun Copper Cerametallic Woofers

    The Cerametallic woofers represent the pinnacle of klipsch driver design, maintaining exceptional rigidity, and lightweight construction, to minimize cone breakup and distortion. When paired with the tractrix horn-loaded lts tweeter, it provides superior speaker efficiency.


    All New Tractrix Port

    The all new tractrix port utilizes tractrix geometry which allow for the most efficient, fastest air transfer from the cabinet - for the cleanest and most powerful low frequency response available on the market today.


    MDF Cabinet With Brushed Polymer Veneer Baffle Finish

    The MDF cabinet with brushed polymer veneer baffle finish has a modern aesthetic with an unparalleled durability that results in a seamless integration into any home or office dÉcor.


    Strong, Flexible, Removable Grille

    A strong, flexible, removable grille attaches magnetically for a chic transition from a bold showstopper to an modest performance piece.


    rockrollreferencekeepers



     

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.






    Klipsch Speakers
    $419.00
    Reference Premiere Monitor Speaker RP-150M - Pair
    Buy Now
  • Rega RP1 Motor Rega RP1 Motor Quick View

    $95.00
    Buy Now
    x

    Rega RP1 Motor

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Rega RP1 Motor

    Rega
    $95.00
    Rega RP1 Motor Buy Now
  • Rega RP10 Turntable (No Cartridge) Rega RP10 Turntable (No Cartridge) Quick View

    $5,495.00
    Buy Now
    x

    Rega RP10 Turntable (No Cartridge)

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The RP10 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    Rega Turntables
    $5,495.00
    Rega RP10 - No Cartridge Buy Now
  • Rega Motor Pad Rega Motor Pad Quick View

    $5.00
    Buy Now
    x

    Rega Motor Pad

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Motor Pad for mounting Rega motors

    Rega
    $5.00
    Rega RP1 Motor Pad Buy Now
  • Rega Carbon Cartridge Rega Carbon Cartridge Quick View

    $65.00
    Buy Now
    x

    Rega Carbon Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music.


    Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag.

    Rega Cartridges
    $65.00
    Rega Carbon Cartridge Buy Now
  • Rega RP10 Turntable (With Cartridge) Rega RP10 Turntable (With Cartridge) Quick View

    $6,695.00
    Buy Now
    x

    Rega RP10 Turntable (With Cartridge)

    40th



    Rega Made


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Factory Fitted With Apheta 2 Moving Coil Cartridge


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    >

    Rega Turntables
    $6,695.00
    Rega RP10 - Apheta 2 Cartridge Buy Now
  • Rega RP10 Turntable with Apheta 2 Cartridge (Open Box) Rega RP10 Turntable with Apheta 2 Cartridge (Open Box) Quick View

    $4,799.00
    Buy Now
    x

    Rega RP10 Turntable with Apheta 2 Cartridge (Open Box)

    40th




    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    RP10 with Apheta 2 Cartridge

    Demo Discounts
    $4,799.00
    Rega RP10 with Apheta 2 Cartridge (Open Box) Buy Now
  • Klipsch Reference Premiere Monitor Speaker RP-160M (Pair) 2 Colors Available Klipsch Reference Premiere Monitor Speaker RP-160M (Pair) Quick View

    $549.00
    Buy Now
    x

    Klipsch Reference Premiere Monitor Speaker RP-160M (Pair)


    The Reference Premiere RP-160M monitors provide intense, theater-quality sound in a compact, bookshelf speaker - giving you flexible placement options for almost any room layout.


    90x90 Hybrid Tractrix Horn

    Tactrix® horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while intensifying imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most pure sound possible.


    Linear Travel Suspension (LTS) Titanium Tweeter

    Linear travel suspension minimizes distortion for enhanced, detailed performance. LTS tweeters have been a hallmark of previous reference lines, making it a core component of some of the world's best speakers.


    Spun Copper Cerametallic Woofers

    The Cerametallic woofers represent the pinnacle of klipsch driver design, maintaining exceptional rigidity, and lightweight construction, to minimize cone breakup and distortion. When paired with the tractrix horn-loaded lts tweeter, it provides superior speaker efficiency.


    All New Tractrix Port

    The all new tractrix port utilizes tractrix geometry which allow for the most efficient, fastest air transfer from the cabinet - for the cleanest and most powerful low frequency response available on the market today.


    MDF Cabinet With Brushed Polymer Veneer Baffle Finish

    The MDF cabinet with brushed polymer veneer baffle finish has a modern aesthetic with an unparalleled durability that results in a seamless integration into any home or office dÉcor.


    Strong, Flexible, Removable Grille

    A strong, flexible, removable grille attaches magnetically for a chic transition from a bold showstopper to an modest performance piece.


    rockrollreferencekeepers



     

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.






    Klipsch Speakers
    $549.00
    Reference Premiere Monitor Speaker RP-160M - Pair
    Buy Now
  • Klipsch Reference Premiere Atmos Elevation Speaker RP-140SA (Pair) Klipsch Reference Premiere Atmos Elevation Speaker RP-140SA (Pair) Quick View

    $499.00
    Buy Now
    x

    Klipsch Reference Premiere Atmos Elevation Speaker RP-140SA (Pair)


    Exceptional. The RP-140SA Dolby Atmos® enabled elevation speaker adds the impressive Dolby Atmos experience to your existing floorstanding or bookshelf speaker.


    As well as featuring the Klipsch Dolby Atmos sound, the RP-140SA Elevation Speaker's versatility allows it to be used as a surround sound speaker perfectly angled on your wall.


    Take Your Movies and Music To New Heights

    The Reference Premiere RP-140SA Dolby Atmos® enabled elevation speaker is a spectacular counterpart to the Reference Premiere family. Place this height channel on top of your current floorstanding speaker to deliver bold, detailed sound. Your music and movies will never sound better.


    90x90 Hybrid Tractrix Horn

    Tactrix® horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while intensifying imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most pure sound possible.


    Linear Travel Suspension (LTS) Titanium Tweeter

    Linear travel suspension minimizes distortion for enhanced, detailed performance. LTS tweeters have been a hallmark of previous reference lines, making it a core component of some of the world's best speakers.


    Spun Copper Cerametallic Woofers

    The Cerametallic woofers represent the pinnacle of klipsch driver design, maintaining exceptional rigidity, and lightweight construction, to minimize cone breakup and distortion. When paired with the tractrix horn-loaded lts tweeter, it provides superior speaker efficiency.


    Brushed Polymer Veneer Finish

    A modern aesthetic with an unparalleled durability that results in a seamless integration into any home or office dÉcor.


    Strong, Flexible, Removable Grille

    A strong, flexible, removable grille attaches magnetically for a chic transition from a bold showstopper to an modest performance piece.


    rockrollreferencekeepers





     

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Klipsch Speakers
    $499.00
    Reference Premiere Atmos Elevation Speaker RP-140SA - Pair Buy Now
  • 1
Go to top