Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Steelhead

'
  • 1
Results per page:
  • Manley Steelhead RC Phono Stage Manley Steelhead RC Phono Stage Quick View

    $8,400.00
    Buy Now
    x

    Manley Steelhead RC Phono Stage

    Stereophile Product The 2003 Four


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    We debuted to the world a killer frikkin' cool phono stage at CES 2001. It was called, aquatic naming theme continuing, The SteelheadĀ®, as it is an upstream device and has a very clever MC variable load auto tranny that we designed and our very own Manley Magnetics department executed (which makes the MC stage so very clever). Iron=transformer=steel makes sense to me...


    It has two Moving Coil inputs with selectable impedance load 25, 50, 100, 200 and 400 Ohms via Mr. Clever Steelhead transformer/autoformer. It also has variable and selectable Moving Magnet input impedances too 25, 50, 100, 200 Ohms and 47 kOhms. Very nifty is the selectable-dial-able-in-able-from-the-faceplate-able capacitive loading for all three of the MM & MC inputs 0 to 1100 picofarads in 10 picofarad steps. Very cool! Equalize baby! TEN picofard steps! Wow! Now you can really dial this in for perfect cartridge matching with ZERO penalty. None of this switching detracts from the sound quality or adds any extra anything to the signal path. Rest assured.


    It's got six tubes. 2 x 6922 plus 4 x 7044 or 5687. It's got a big honkin' volume control. It can drive an amplifier directly if you want, if you don't do digital. Hey and if you happen to have three turntables set up, we give you 2 x MC and 1 x MM selectable inputs! It's got variable and fixed volume outputs. And All-tube really low Z tube buffered outputs. Like inherently 20 Ohms plus the little 47 Ohm OK drive those high capacitance audiophile cables why doncha resistor, so it's real output impedance is only 67 Ohms. No wanky cathode follower (oh bor-ing) output here like the other guys. We got your real low impedance all-tube outputs right here! It will drive anything and everything. Long cables, no problem.


    It's got selectable gain 50, 55, 60, 65dB on a switch that even auto-mutes as you change it so no nasty bangs. Gain switch markings are referred to from the input of the 1st active electronics at 1 kHz to the fixed output @ 10k load, regardless of whether source is MM or XFMR stepped-up MC. It is not really practical to include MC step-up gain on the front panel markings due to the variable SOURCE impedances of the MC cartridges and the variable LOADING that the input XFMR will have on any given cartridge. All of this total MC gain variability should be confined to about 3 to 12 dB of range though. XFMR step-up gain plateaus as the load Z on a given MC cartridge is optimised...producing no VOLTAGE gain but in fact a bit more POWER gain... All this means you should set a load Z which sounds best with your particular MC cartridge and adjust gain to suit your system's operating level. Whatever you like. You will not blow anything up.


    (Bottom line: there is plenty of gain... enough to do justice to your fave lo-output MC cartridges).


    It's got a mute switch. It's got a just turn it down while I cue up so I don't throw my woofer cones across the room but I still want the same volume I was listening at before I flipped the side DIM switch. And what goes with DIM better than SUM which would be the MONO button... It has a killer hyper-regulated outboard power supply that plugs in on the huge-est connector you ever saw. And you can just hit the standby button to keep everybody off while you take a small holiday to Tahiti. A backlit MANLEY STEELHEAD illuminated badge reflects back to vinyl-days-of-yore while the millions of BLUE LEDs remind you that this is modern tube engineering design, baby!


    The VARIABLE Outputs are controlled by the precision film dual NOBLEĀ® volume control. They are SMOOTH action these days as the fashion went against the detented ones.


    This is a tweak-o-holic tube-lover's dream...


    Manley Labs
    $8,400.00
    Manley Steelhead Phono Stage Buy Now
  • Manley Chinook Phono Stage Manley Chinook Phono Stage Quick View

    $2,400.00
    Buy Now
    x

    Manley Chinook Phono Stage

    2012 2012 Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Beautiful build quality


    Audiophile componentry


    Handcrafted in the USA


    Flexible cartridge loading options


    Angling for an affordable yet world-class vacuum tube phono stage? The hunt is over! The spawn of the Manley Steelhead - one of the world's greatest phono preamplifiers - Stereophile Class A Recommended Component and The Absolute Sound's Preamp of the Year, has arrived. The Chinook epitomizes the sound of the Steelhead. Designed for the music lover, not the switch tweaker.


    Like the Steelhead, each channel employs the two triode sections of a 6922 for amplifying duties with highly accurate passive RIAA equalization networks. In the Chinook, the signal is then directly coupled to another 6922 dual triode serving as the output driver in a White Follower configuration. This output stage circuit is our favorite because of its super-low output impedance and beefy current-driving capabilities. It can drive long cable lengths and difficult loads, tube or solid-state. Bring it on. No wimpy cathode followers here!


    Setting up the Chinook couldn't be easier. There are two internal settings for optimal gain: 45dB for Moving-Magnet cartridges and 60dB for Moving-Coil cartridges. Set it and forget it! The back panel contains DIP switches for adjusting the input resistive and capacitance loading values. 31 possible options between 26 and 800 Ohms plus 47k Ohms and 7 capacitive loading choices between 50 pF and 350 pF provide flexibility to match any cartridge and fine tune the tone. Audiophile-grade and time-proven componentry is used throughout, embodying Manley's dedication to seductive sonics, combined with the reliability that professionals around the world depend on. At just about a quarter of the price of our revered Steelhead preamplifier, the Chinook's focus is on elegance of design, careful execution, efficient construction, and appreciable quality.


    Designed and built in California, the Chinook exemplifies Manley's commitment to our local community and to a simple, clean, and quiet signal path. The Chinook demonstrates the supreme linearity of vacuum tubes while providing the flexibility needed to embrace any turntable setup. Everything from the most exotic 180 gram audiophile pressing to 25 cent thrift-store classics will be reproduced accurately and musically.


    Don't let this one get away! Hook a Chinook!


    Manley Labs
    $2,400.00
    Manley Chinook Phono Stage Buy Now
  • Manley Chinook Phono Stage (Open Box) Manley Chinook Phono Stage (Open Box) Quick View

    $1,999.00
    Buy Now
    x

    Manley Chinook Phono Stage (Open Box)

    2012 2012 Stereophile


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    Beautiful build quality


    Audiophile componentry


    Handcrafted in the USA


    Flexible cartridge loading options


    Angling for an affordable yet world-class vacuum tube phono stage? The hunt is over! The spawn of the Manley Steelhead - one of the world's greatest phono preamplifiers - Stereophile Class A Recommended Component and The Absolute Sound's Preamp of the Year, has arrived. The Chinook epitomizes the sound of the Steelhead. Designed for the music lover, not the switch tweaker.


    Like the Steelhead, each channel employs the two triode sections of a 6922 for amplifying duties with highly accurate passive RIAA equalization networks. In the Chinook, the signal is then directly coupled to another 6922 dual triode serving as the output driver in a White Follower configuration. This output stage circuit is our favorite because of its super-low output impedance and beefy current-driving capabilities. It can drive long cable lengths and difficult loads, tube or solid-state. Bring it on. No wimpy cathode followers here!


    Setting up the Chinook couldn't be easier. There are two internal settings for optimal gain: 45dB for Moving-Magnet cartridges and 60dB for Moving-Coil cartridges. Set it and forget it! The back panel contains DIP switches for adjusting the input resistive and capacitance loading values. 31 possible options between 26 and 800 Ohms plus 47k Ohms and 7 capacitive loading choices between 50 pF and 350 pF provide flexibility to match any cartridge and fine tune the tone. Audiophile-grade and time-proven componentry is used throughout, embodying Manley's dedication to seductive sonics, combined with the reliability that professionals around the world depend on. At just about a quarter of the price of our revered Steelhead preamplifier, the Chinook's focus is on elegance of design, careful execution, efficient construction, and appreciable quality.


    Designed and built in California, the Chinook exemplifies Manley's commitment to our local community and to a simple, clean, and quiet signal path. The Chinook demonstrates the supreme linearity of vacuum tubes while providing the flexibility needed to embrace any turntable setup. Everything from the most exotic 180 gram audiophile pressing to 25 cent thrift-store classics will be reproduced accurately and musically.


    Don't let this one get away! Hook a Chinook!

    Demo Discounts
    $1,999.00
    Manley Chinook Phono Stage (Open Box) Buy Now
  • Manley Headphone Amplifier (Pre-Order) 3 COLORS AVAILABLE Manley Headphone Amplifier (Pre-Order) Quick View

    $2,950.00
    Buy Now
    x

    Manley Headphone Amplifier (Pre-Order)


    Manley Laboratories have been designing and manufacturing professional and hi-fidelity audio equipment for the last twenty five years. Headphone listening has become more and more popular in recent years. To meet this new demand Manley have combined its professional and domestic engineering skills to develop a new and exciting groundbreaking product, The Manley Headphone Amplifier.


    Headphone listening is not new to us, we have developed headphone mixers for the professional industry and our Neo-Classic 300B preamplifier was designed with the serious headphone listener in-mind, which now has quite a cult following. The new Manley Headphone Amplifier addresses absolutely every possible feature the headphone user could desire.


    Feature Rich


    This feature rich product has no less than twelve independent controls designed for maximum performance and maximum control. We design and manufacture our own output transformers and this is where this product excels. The Manley Headphone Amplifier utilizes hand-wound air gapped dual mode output transformers. The user can configure the unit for all triode Push-Pull mode or Single-Ended mode. The transformer can be configured to drive three types of headphone loads, covering a range from 12 to 600 ohms.


    The enthusiast can also vary the Feedback from 0dB to 10dB, maintaining a ruler-flat frequency response across the audio band, demonstrating how stable the design is. For increased transparency and accuracy we have incorporated a Precision Stepped Relay Volume control with perfect channel balance. A balance control is also available for extra sensitivity. The Manley Headphone Amplifier operates fully symmetrical, enabling it to drive balanced headphones through its XLR output. Also available is the standard non-balanced "Jack" plug or TRS connection. Another very useful feature is a preamplifier output, which routes your first input through the system when not in use, no need for unplugging sources! The Manley Headphone amplifier can also be used as a stand-alone transformer coupled preamplifier, so it can be partnered with any power amplifier if so desired.


    With the advent of expensive and high technology headphones it was important for the Manley design team to think about protection. So the Manley Headphone Amplifier features a user defined headphone overload protection system. The user dials this in so precious headphones are never overdriven. For maximum performance and the lowest noise floor, The Manley Headphone Amplifier incorporates a very high-tech switching audiophile power supply. The high-tension and low-tension rails are all fully regulated offering super low impedance for a fast and dynamic response.


    The Manley Headphone Amplifier also incorporates a tone control circuit what? for an audiophile product!! Yes! With the expertise gleaned from building professional studio equipment, we have incorporated the best possible solution for a tone control. It is completely switchable, so for the real purist it is completely out of the circuit, but if you need that slight adjustment for a hard digital recording the feature is there.


    The Design


    The Manley Headphone Amplifier is a very unusual design. Zia Faruqi, who is responsible for running the engineering team and industrial design at Manley Laboratories, developed its concept. "I wanted a design that would reflect the use of this piece of equipment. Its shape was inspired by a head, a piece that you could rest your headphones on, a piece that you want to indulge yourself in" Mitch Margolis who worked on the Steelhead and our 300B amplifiers worked with our head engineer Humberto Rodriguez to finalize its design. Available in three different colors for today's lifestyle choices. Champagne & White, Titanium & Bronze and Copper & Black.


    Manley Labs
    $2,950.00
    Headphone Amplifier PRE-ORDER
    Buy Now
  • 1
Go to top