Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Stiff Little

'
  • 1
Results per page:
  • Inflammable Material Inflammable Material Quick View

    $21.99
    Buy Now
    x

    Inflammable Material

    The debut album from Belfast's finest punk band, originally released on the Rough Trade label in 1979. Inflammable Material features two of the greatest songs recorded on the controversy and violence surrounding Northern Ireland. Suspect Device and Alternative Ulster indict both sides of the conflict, the Royal Ulster Constabulary and the Irish Republican Army, in driving punk rock form. Those tracks, along with Rough Trade (which blatantly attacks their own record label), and the Bob Marley cover, Johnny Was, make up the highlights of one of the greatest albums of the first wave of punk. Reissued on 180g vinyl.
    1. Suspect Device
    2. State of Emergency
    3. Here We Are Nowhere
    4. Wasted Life
    5. No More of That
    6. Barbed Wire Love
    7. White Noise
    8. Breakout
    9. Law and Order
    10. Rough Trade
    11. Johnny Was
    12. Alternative Ulster
    13. Closed Groove
    Stiff Little Fingers
    $21.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • Stiff Stiff Quick View

    $19.99
    Buy Now
    x

    Stiff

    Three years on from their critically acclaimed "barbeque" record Corsicana Lemonade, White Denim are back with more than just a new album to commemorate. Their sixth record, Stiff - out 25 March 2016 via Downtown/Sony Red - is a return to the Austin quartet's frenetic rock band roots, and is both a jubilant thrill ride and joyous celebration of their past ten years. Heading into the studio with an external producer to oversee a whole album for the first time - and even writing a tune with Cass McCombs ('Thank You') - the band teamed up with the legendary Ethan Johns (Paul McCartney, Laura Marling, The Staves) to produce their first truly live record, one teeming with a cool '70s undertow, tumultuous riffs and a feverish energy that's resulted in arguably some of their biggest and brawniest songs to date.


    With drummer Joshua Block and guitarist Austin Jenkins now pursuing other production ventures, vocalist/guitarist James Petralli and bassist Steve Terebecki spent a long time reassessing exactly what White Denim meant to them. "The big thing for Steve and I was trying to define what made us want to keep going," Petralli explains of the album's early days. "What's our partnership about? What's cool about this? We learnt a lot making D and Corsicana Lemonade. We wanted to take some of those lessons and apply it back to our original mission statement. We were trying to get back to some of the things that made us excited about the band in the first place."


    Opener 'Had 2 Know (Personal)' is the embodiment of that mission statement. Described by Petralli as "a reassertion of our initial intent to make songs that satisfy our urge to play fast", it sets the tone brilliantly for the bulk of Stiff, right from its idiosyncratic, Red Krayola-sampling beginning to its huge, golden era chorus. While it remains distinctively White Denim, there's a reinvigoration permeating through its riffs via new guitarist Jonathan Horne and a beefed-up rhythm section thanks to the work of new drummer Jeffrey Olson. Every single high octane turn - from the tremendously fun 'Ha Ha Ha Ha (Yeah)' to the outrageously shredding 'Holda You (I'm Psycho)' - sounds like a band re-energised and revitalised, resulting in what Petralli describes as a "high heat, high energy, good times record". Having previously sold out Shepherd's Bush Empire and having toured with Tame Impala and Arctic Monkeys, Stiff is full to the brim with songs that sound ready to now lift White Denim to similar heights.


    For the most part, Stiff is an album crammed with adrenaline-fuelled sing-alongs that show off the band's staple technical abilities. But it's also one that sees some new shades that they've developed along the way, too. Citing new wave and the razor-sharp pop punk of Buzzcocks as influences this time round, there's an addictive Elvis Costello circa This Year's Model quality to 'Real Deal Momma', a tune that highlights the band's love for hummable synthesisers and curious, affecting oddities. Then there's the cow bell calm and backing vocals laden brilliance of 'I'm The One (Big Big Fun)', that along with 'Take It Easy (Ever After Lasting Love)' (a song Petralli says "wants to be on a collection of doo wop songs written in 2016") shows a softer and more intricate side to the band while fully emphasising Petralli's vocal excellence.


    Of the artwork - which was created by collagist Eugenia Loli - was inspired and worked from the band's previous album covers and videos as a visual template. Ultimately, it's a fleeting visit to a place the band have been before, with the covers of Workout Holiday and D being collages too. Stiff was even originally stylised 'Stif', which when spelt backwards spells out the title of their second full-length Fits. Then there's 'Mirrored In Reverse', a nod to the Fits track 'Mirrored And Reverse'. "I mean, we're ten!" Petralli says in disbelief while explaining all of the record's throwbacks. "We did think about naming this record Ten and referencing the Pearl Jam cover!"


    Recorded with nothing but equipment that Petralli describes as being "past a certain point in the '70s", he explains that Stiff is an album made "entirely the old way". "It was tracked live to 16-track tape with very little overdubs," he says. "It was very hardcore record making - traditional in every aspect." Recorded with Ethan Johns in Asheville, North Carolina over a twenty-day period, Petralli and the band had an intense but deeply educational time with Johns. "It was really cool. The guy had these stories that were just unbelievable. He started talking about playing with Jimmy Page when he was a kid, and he lived in the studio where The Rolling Stones and The Faces would just hang out. Having Ethan in the room pushing us really made it more of an 'in the moment' and a visual thing. Capturing live performances is what he does really well."


    To make things even more celebratory, there was an extra ten day stint spent with go-to White Denim man Jim Vollentine, who Petralli describes as "my guy, man". He continues: "we've made a lot of records together now. When we left the studio in Asheville with Ethan, we thought we gotta work on this record some more, you know? Though it was really just mixing, which we did with respect to Ethan's arrangements and his recording. I feel like I really haven't made anything like this before."


    Ultimately, Stiff is the sound of a band finding their feet again and having the time of their lives. It's a record that refuses to buckle under the pressures of life, instead offering up a soundtrack to sing, dance, shout and scream along to. As a White Denim album, it's a joyride through the past ten years of the band's idiosyncratic catalogue while simultaneously pushing things further forward into new territories. "It's similar to our first record [Workout Holiday] in that we found the initial energy and just went with that," Petralli says of the initial studio spark that started it all. "We thought, what's the fundamental thing that made us want to get into a van and quit our terrible jobs and start this whole thing in the first place? And it was loud, fast-playing, rock and roll."

    1. Had 2 Know (Personal)
    2. Ha Ha Ha Ha (Yeah)
    3. Holda You (I'm Psycho)
    4. There's a Brain in My Head
    5. Take It Easy (Ever After Lasting Love)
    6. (I'm the One) Big Big Fun
    7. Real Deal Momma
    8. Mirrored in Reverse
    9. Thank You
    White Denim
    $19.99
    Vinyl LP - Sealed Buy Now
  • The Meanest Of Times The Meanest Of Times Quick View

    $19.99
    Buy Now
    x

    The Meanest Of Times

    DKM come out swinging with their sixth studio album; a collection of tales about family, loyalty, and remembering where you came from. It contains all the best elements of the band's sound: a complex distillation of classic punk rock, Celtic folk, and American rock 'n' roll. It puts the band's diversity, intensity, and sincerity on full display. Consolidating strong sales history with digital single sales of 250,000 for I'm Shipping Up To Boston, which was the title track in Martin Scorcese's Academy Award winning film, The Departed. For fans of The Pogues, The Clash, Stiff Little Fingers, AC/DC, Bruce Springsteen.
    1. Famous For Nothing
    2. God Willing
    3. The State Of Massachusetts
    4. Tomorrow's Industry
    5. Echoes On A. Street
    6. Vices And Virtues
    7. Surrender
    8. (F)lannigan's Ball
    9. I'll Begin Again
    10. Fairmount Hill
    11. Loyal To No One
    12. Shattered
    13. Rude Awakenings
    14. Johnny, I Hardly Knew Ya
    15. Never Forget
    16. Baba O'Riley
    17. Promise Land
    Dropkick Murphys
    $19.99
    Vinyl LP - Sealed Buy Now
  • Going Out In Style Going Out In Style Quick View

    $19.99
    Buy Now
    x

    Going Out In Style

    DKM come out swinging with their sixth studio album; a collection of tales about family, loyalty, and remembering where you came from. It contains all the best elements of the band's sound: a complex distillation of classic punk rock, Celtic folk, and American rock 'n' roll. It puts the band's diversity, intensity, and sincerity on full display. Consolidating strong sales history with digital single sales of 250,000 for I'm Shipping Up To Boston, which was the title track in Martin Scorcese's Academy Award winning film, The Departed. For fans of The Pogues, The Clash, Stiff Little Fingers, AC/DC, Bruce Springsteen.


    So what if I threw a party & all my friends were there? So goes a line from the title song of Dropkick Murphy's seventh studio album Going Out In Style. From the meanest of times to the best of times DKM want to lift your spirits during these tough times with the party to end all parties blasting from your speakers. The Murphy's know how to turn a wake in to a party.


    Now in their 15th year; with a Scorsese soundtrack hit, a US top 20 album, a lifetime membership to every Boston sports team and a sound owing as much to Springsteen and The Pogues as to the Clash, DKM have come a long way from the days of BostonĂ¢s Rathskeller.


    Dropkick Murphys are not your typical punk band, they are Boston's biggest rock band, a band that plays Irish music with punk roots. A band with enormous families and armies of friends. They roll deep. DKM's music is so fierce and furious, their stage presence so explosive, and their commitment to their fans so ironclad, one can't help but be moved. They are the AC/DC of Celtic punk rock.

    1. Hang 'Em High
    2. Going Out In Style
    3. The Hardest Mile
    4. Cruel
    5. Memorial Day
    6. Sunday Hardcore Matinee
    7. Broken Hymns
    8. Deed Not Words
    9. Take 'Em Down
    10. Climbing A Chair To Bed
    11. 1953
    12. Peg O' My Heart (traditional)
    13. The Irish Rover (traditional)
    Dropkick Murphys
    $19.99
    180 Gram Audiophile Virgin Vinyl LP - Sealed Buy Now
  • Day Of The Dog Day Of The Dog Quick View

    $15.99
    Buy Now
    x

    Day Of The Dog

    " his songs come off as intelligent, angry, funny and ferocious. Furman sings every song like it's going to be his last."

    - American Songwriter Magazine


    Ezra Furman has always positioned himself as a singer-songwriter with or without the Harpoons. His acoustic based music would sometimes rock or burst forth with technicolor pop flourishes. On 2012's The Year of No Returning the production was especially
    sophisticated but now like Dylan in '65 he is ready to harness the electricity and delve a little deeper into life as a rock and roller with punk panache.


    On Day of the Dog Ezra re-invents himself as an angry young man ready to throw himself on the pyre for the redemption that will follow. With a tight rockin' combo he re-works '50s grooves through primal-Lennon outbursts, glam hissing, right up and full circle into Pixies-style/Buddy Holly rave-ups. It's an instant classic that could have fit on Stiff between Costello's debut and the Damned.

    1. I Wanna Destroy Myself
    2. Tell 'Em All to Go to Hell
    3. My Zero
    4. Day of the Dog
    5. Walk On In Darkness
    6. Cold Hands
    7. Anything Can Happen
    8. And Maybe God is a Train
    9. Been So Strange
    10. The Mall
    11. At the Bottom of the Ocean
    12. Slacker / Adria
    13. Cherry Lane
    Ezra Furman
    $15.99
    Vinyl LP - Sealed Buy Now
  • Rega RP10 Turntable (No Cartridge) Rega RP10 Turntable (No Cartridge) Quick View

    $5,495.00
    Buy Now
    x

    Rega RP10 Turntable (No Cartridge)

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The RP10 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    Rega Turntables
    $5,495.00
    Rega RP10 - No Cartridge Buy Now
  • Rega RP10 Turntable (With Cartridge) Rega RP10 Turntable (With Cartridge) Quick View

    $6,695.00
    Buy Now
    x

    Rega RP10 Turntable (With Cartridge)

    40th



    Rega Made


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Factory Fitted With Apheta 2 Moving Coil Cartridge


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    >

    Rega Turntables
    $6,695.00
    Rega RP10 - Apheta 2 Cartridge Buy Now
  • 1
Go to top