Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - 20% Off Vinyl Orders 100+
Home > Products for: '

Tube Phono Stage

'
  • 1
Results per page:
  • Manley Chinook Phono Stage Manley Chinook Phono Stage Quick View

    $2,400.00
    Buy Now
    x

    Manley Chinook Phono Stage

    2012 2012 Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Beautiful build quality


    Audiophile componentry


    Handcrafted in the USA


    Flexible cartridge loading options


    Angling for an affordable yet world-class vacuum tube phono stage? The hunt is over! The spawn of the Manley Steelhead - one of the world's greatest phono preamplifiers - Stereophile Class A Recommended Component and The Absolute Sound's Preamp of the Year, has arrived. The Chinook epitomizes the sound of the Steelhead. Designed for the music lover, not the switch tweaker.


    Like the Steelhead, each channel employs the two triode sections of a 6922 for amplifying duties with highly accurate passive RIAA equalization networks. In the Chinook, the signal is then directly coupled to another 6922 dual triode serving as the output driver in a White Follower configuration. This output stage circuit is our favorite because of its super-low output impedance and beefy current-driving capabilities. It can drive long cable lengths and difficult loads, tube or solid-state. Bring it on. No wimpy cathode followers here!


    Setting up the Chinook couldn't be easier. There are two internal settings for optimal gain: 45dB for Moving-Magnet cartridges and 60dB for Moving-Coil cartridges. Set it and forget it! The back panel contains DIP switches for adjusting the input resistive and capacitance loading values. 31 possible options between 26 and 800 Ohms plus 47k Ohms and 7 capacitive loading choices between 50 pF and 350 pF provide flexibility to match any cartridge and fine tune the tone. Audiophile-grade and time-proven componentry is used throughout, embodying Manley's dedication to seductive sonics, combined with the reliability that professionals around the world depend on. At just about a quarter of the price of our revered Steelhead preamplifier, the Chinook's focus is on elegance of design, careful execution, efficient construction, and appreciable quality.


    Designed and built in California, the Chinook exemplifies Manley's commitment to our local community and to a simple, clean, and quiet signal path. The Chinook demonstrates the supreme linearity of vacuum tubes while providing the flexibility needed to embrace any turntable setup. Everything from the most exotic 180 gram audiophile pressing to 25 cent thrift-store classics will be reproduced accurately and musically.


    Don't let this one get away! Hook a Chinook!


    Manley Labs
    $2,400.00
    Manley Chinook Phono Stage Buy Now
  • Manley Chinook Phono Stage (Open Box) Manley Chinook Phono Stage (Open Box) Quick View

    $1,999.00
    Buy Now
    x

    Manley Chinook Phono Stage (Open Box)

    2012 2012 Stereophile


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    Beautiful build quality


    Audiophile componentry


    Handcrafted in the USA


    Flexible cartridge loading options


    Angling for an affordable yet world-class vacuum tube phono stage? The hunt is over! The spawn of the Manley Steelhead - one of the world's greatest phono preamplifiers - Stereophile Class A Recommended Component and The Absolute Sound's Preamp of the Year, has arrived. The Chinook epitomizes the sound of the Steelhead. Designed for the music lover, not the switch tweaker.


    Like the Steelhead, each channel employs the two triode sections of a 6922 for amplifying duties with highly accurate passive RIAA equalization networks. In the Chinook, the signal is then directly coupled to another 6922 dual triode serving as the output driver in a White Follower configuration. This output stage circuit is our favorite because of its super-low output impedance and beefy current-driving capabilities. It can drive long cable lengths and difficult loads, tube or solid-state. Bring it on. No wimpy cathode followers here!


    Setting up the Chinook couldn't be easier. There are two internal settings for optimal gain: 45dB for Moving-Magnet cartridges and 60dB for Moving-Coil cartridges. Set it and forget it! The back panel contains DIP switches for adjusting the input resistive and capacitance loading values. 31 possible options between 26 and 800 Ohms plus 47k Ohms and 7 capacitive loading choices between 50 pF and 350 pF provide flexibility to match any cartridge and fine tune the tone. Audiophile-grade and time-proven componentry is used throughout, embodying Manley's dedication to seductive sonics, combined with the reliability that professionals around the world depend on. At just about a quarter of the price of our revered Steelhead preamplifier, the Chinook's focus is on elegance of design, careful execution, efficient construction, and appreciable quality.


    Designed and built in California, the Chinook exemplifies Manley's commitment to our local community and to a simple, clean, and quiet signal path. The Chinook demonstrates the supreme linearity of vacuum tubes while providing the flexibility needed to embrace any turntable setup. Everything from the most exotic 180 gram audiophile pressing to 25 cent thrift-store classics will be reproduced accurately and musically.


    Don't let this one get away! Hook a Chinook!

    Demo Discounts
    $1,999.00
    Manley Chinook Phono Stage (Open Box) Buy Now
  • Bellari VP530 USB/Tube Phono Stage Bellari VP530 USB/Tube Phono Stage Quick View

    $399.99
    Buy Now
    x

    Bellari VP530 USB/Tube Phono Stage


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The vp530 is a usb/tube phono preamp for use with moving-magnet and high output moving-coil cartridges. It includes a built in headphone amplifier, Burr-Brown A2D converter w/usb output, and RIAA curve/flat EQ. The vp530 is designed to amplify an RIAA equalized phono signal to a hi-level signal or provide a USB digital output. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.


    This product is not eligible for discount.


    Accessories
    $399.99
    Bellari VP530 USB/Tube Phono Stage Buy Now
  • Cayin A-50T MK 2 Tube Integrated Amplifier (with Phono Stage) Cayin A-50T MK 2 Tube Integrated Amplifier (with Phono Stage) Quick View

    $1,900.00
    Buy Now
    x

    Cayin A-50T MK 2 Tube Integrated Amplifier (with Phono Stage)

    Stereophile Stereophile



    The Cayin A-50T is the best low-price amp I have ever heard, and it rivals some of the best amps in any price range.

    - Harry Weisfeld, owner of VPI Industries


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Includes Phono Stage


    A beautifully-crafted, hand-made tube piece manufactured to deliver the sound of the classic Marantz 8B. The A-50T MK 2 now features the ability handle either EL34 or KT88 output tubes.


    The Cayin Audio A-50T MK 2 uses four EL34s for Class A/B1 P.P amplification but can use KT88s (not included) if so desired. The craftsmanship is absolutely first-rate, featuring point-to-point wiring, and each unit is hand-initialed by a quality-control inspector. The toroid power transformer and EI audio transformer are specially manufactured for the A-50T MK 2 with low magnetic leakage, wide frequency response and low impedance. Two 12AX7EHs and two 12AU7s are used in the preamplifier. One very cool feature is the ability to switch between ultralinear and triode by remote control.


    This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship like with this Cayin gear for anywhere close to this price.


    There are output taps for 4 or 8 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun. There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like. Turn off the lights and watch 'em glow.


    Cayin
    $1,900.00
    Cayin A-50T MK 2 Tube Integrated Amp with Phono Stage Buy Now
  • Tube Phono Amplifier By Bellari VP130 Tube Phono Amplifier By Bellari VP130 Quick View

    $275.00
    Buy Now
    x

    Tube Phono Amplifier By Bellari VP130


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    It was quiet, and golden-sweet and liquid in the midrange, as you'd expect from a 12AX7-based phono preamp.

    - Michael Fremer, Stereophile


    The vp130 is a tube phono preamp with a built in headphone amplifier for use with moving magnet and high output moving coil cartridges. The vp130 is designed to amplify an RIAA equalized phono signal to a hi level signal. Since the unit utilizes tube circuitry the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it's manufactured in the US.


    Music Hall
    $275.00
    Bellari VP 130 Phono Amp Buy Now
  • Manley Steelhead RC Phono Stage Manley Steelhead RC Phono Stage Quick View

    $8,400.00
    Buy Now
    x

    Manley Steelhead RC Phono Stage

    Stereophile Product The 2003 Four


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Handcrafted in the USA


    We debuted to the world a killer frikkin' cool phono stage at CES 2001. It was called, aquatic naming theme continuing, The Steelhead®, as it is an upstream device and has a very clever MC variable load auto tranny that we designed and our very own Manley Magnetics department executed (which makes the MC stage so very clever). Iron=transformer=steel makes sense to me...


    It has two Moving Coil inputs with selectable impedance load 25, 50, 100, 200 and 400 Ohms via Mr. Clever Steelhead transformer/autoformer. It also has variable and selectable Moving Magnet input impedances too 25, 50, 100, 200 Ohms and 47 kOhms. Very nifty is the selectable-dial-able-in-able-from-the-faceplate-able capacitive loading for all three of the MM & MC inputs 0 to 1100 picofarads in 10 picofarad steps. Very cool! Equalize baby! TEN picofard steps! Wow! Now you can really dial this in for perfect cartridge matching with ZERO penalty. None of this switching detracts from the sound quality or adds any extra anything to the signal path. Rest assured.


    It's got six tubes. 2 x 6922 plus 4 x 7044 or 5687. It's got a big honkin' volume control. It can drive an amplifier directly if you want, if you don't do digital. Hey and if you happen to have three turntables set up, we give you 2 x MC and 1 x MM selectable inputs! It's got variable and fixed volume outputs. And All-tube really low Z tube buffered outputs. Like inherently 20 Ohms plus the little 47 Ohm OK drive those high capacitance audiophile cables why doncha resistor, so it's real output impedance is only 67 Ohms. No wanky cathode follower (oh bor-ing) output here like the other guys. We got your real low impedance all-tube outputs right here! It will drive anything and everything. Long cables, no problem.


    It's got selectable gain 50, 55, 60, 65dB on a switch that even auto-mutes as you change it so no nasty bangs. Gain switch markings are referred to from the input of the 1st active electronics at 1 kHz to the fixed output @ 10k load, regardless of whether source is MM or XFMR stepped-up MC. It is not really practical to include MC step-up gain on the front panel markings due to the variable SOURCE impedances of the MC cartridges and the variable LOADING that the input XFMR will have on any given cartridge. All of this total MC gain variability should be confined to about 3 to 12 dB of range though. XFMR step-up gain plateaus as the load Z on a given MC cartridge is optimised...producing no VOLTAGE gain but in fact a bit more POWER gain... All this means you should set a load Z which sounds best with your particular MC cartridge and adjust gain to suit your system's operating level. Whatever you like. You will not blow anything up.


    (Bottom line: there is plenty of gain... enough to do justice to your fave lo-output MC cartridges).


    It's got a mute switch. It's got a just turn it down while I cue up so I don't throw my woofer cones across the room but I still want the same volume I was listening at before I flipped the side DIM switch. And what goes with DIM better than SUM which would be the MONO button... It has a killer hyper-regulated outboard power supply that plugs in on the huge-est connector you ever saw. And you can just hit the standby button to keep everybody off while you take a small holiday to Tahiti. A backlit MANLEY STEELHEAD illuminated badge reflects back to vinyl-days-of-yore while the millions of BLUE LEDs remind you that this is modern tube engineering design, baby!


    The VARIABLE Outputs are controlled by the precision film dual NOBLE® volume control. They are SMOOTH action these days as the fashion went against the detented ones.


    This is a tweak-o-holic tube-lover's dream...


    Manley Labs
    $8,400.00
    Manley Steelhead Phono Stage Buy Now
  • Pro-Ject Tube Box S 2 COLORS AVAILABLE Pro-Ject Tube Box S Quick View

    $449.00
    Buy Now
    x

    Pro-Ject Tube Box S


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    For MM/MC Cartridges


    The Pro-Ject Tube Box S sets the sonic standard for an entry-level tube phono stage. This product is built using the same high-grade metal chassis sharedwith the rest of the new S product series. This all metal case features great shielding from both vibration and electromagnetic interference. Selectable MM and MC modes as well as cartridge loading via bottom panel mounted switches. Gain is rated at 41dB, 51dB and 61dB (MC) and is derived by a pair of graded ECC83 (12AX7A) tubes.


    Pro-Ject
    $449.00
    Tube Box S (2 Colors Available)
    Buy Now
  • SCC Conductor - Cardas XLR 2 LENGTHS AVAILABLE SCC Conductor - Cardas XLR Quick View

    $495.00
    Buy Now
    x

    SCC Conductor - Cardas XLR

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $495.00
    SCC Conductor - Cardas XLR (2 Lengths Available)
    Buy Now
  • SCC Conductor - Cardas SRCA 2 LENGTHS AVAILABLE SCC Conductor - Cardas SRCA Quick View

    $395.00
    Buy Now
    x

    SCC Conductor - Cardas SRCA

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $395.00
    SCC Conductor - Cardas SRCA (2 Lengths Available)
    Buy Now
  • SCC Conductor - Vampire Locking Connector 2 LENGTHS AVAILABLE SCC Conductor - Vampire Locking Connector Quick View

    $395.00
    Buy Now
    x

    SCC Conductor - Vampire Locking Connector

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Shielded Solid Silver Conductor Interconnect Cables


    Bob's Devices continues to break the price barrier by offering top quality audiophile cables at 1/3 the price of competitive products. All our cables are hand crafted, fully balanced, individually tested and terminated with top of the line Cardas Audio SRCA and the new Cardas XLR connectors. For those of you who prefer RCA locking connectors, we offer the Vampire LRCA-8 Locking connectors with spring loaded center pin.. The interior connections are resistance soldered and dampened in pure Teflon wrap.


    The silver and silver clad interconnects are terminated using WBT silver solder. As always, we back our cables with our 100% customer satisfaction guarantee. All Bob's interconnects feature a balanced type of architecture with internal conductors carrying the + and - signal with an additional braided conductive shield that is connected on one end only. This provides shielding effectively rejecting RF and EM interference without creating ground loops (say goodbye to hum).


    Three lines of cables are offered: cables with Solid Silver conductors, cables with Silver-clad copper conductors and our limited production vintage cables constructed with copper conductors.


    This Solid Silver custom terminated interconnect is Bob's top-of-the-line cable. It features a pair of pure silver 22 awg conductors and triple-shielding consisting of a silver plated OFC braided shield coupled to an Aluminum/Mylar shield and a Teflon PTFE shield. Covering the shield is a braided nylon sheath encased in a clear PVC outer jacket. Internally, this cable has 5 polyethylene air tubes separating and isolating the conductors.


    Bob's silver cable is custom terminated in our lab with your choice of the best Cardas SRCA or the new Cardas XLR connectors.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    Bob's custom terminated silver-clad crystal copper interconnects feature a balanced design architecture using Polyethylene insulation and a pair of silver plated copper conductors (SP-OFC) that are insulated with Foamed Polyethylene, and wrapped together by a double screen shielding consisting of a tinned OFC braided shield coupled to an Aluminum/Mylar shield. This wire architecture is modeled from the wire Koetsu uses to wrap their Platinum magnets. We believe the results will thrill you with exhilarating highs, tight bass, and romantic mids - very much the Koetsu paradigm. These interconnects not only shine with tube equipment but do especially well with a solid-state phono stage and preamp.


    The silver clad copper wire uses the UP-OCCP (Ultra Pure - Ohno Continuous Casting Process) which is a continuous-casting method that was developed by Professor Ohno of the Chiba Institute in Japan. This wire is free from impurities (up to 99.99998% pure copper and silver). Accordingly, it is able to transmit electrical signals faster, and with less distortion than ordinary OFC and silver wires.


    Bob silver-clad copper interconnects are custom terminated in our lab using the very best Cardas SRCA or the new Cardas XLR connectors. Vampire LC-8 locking connectors are also available.


    This item is not eligible for discount.


    Bob's Devices
    $395.00
    SCC Conductor - Vampire Locking Connector (2 Lengths Available)
    Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • VPI 299D Integrated Amplifier (Open Box) VPI 299D Integrated Amplifier (Open Box) Quick View

    $2,999.00
    Buy Now
    x

    VPI 299D Integrated Amplifier (Open Box)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Open Box


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    Demo Discounts
    $2,999.00
    VPI 299D Integrated Amplifier (Open Box) Buy Now
  • 1
Go to top