Pro-ject Authorized & Certified VPI Dealer

VINYL. OUR WAY OF LIFE SINCE 2004

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Turntable Cartridges

'
Results per page:
  • Ortofon 2M Blue Phono Cartridge Ortofon 2M Blue Phono Cartridge Quick View

    $236.00
    Buy Now
    x

    Ortofon 2M Blue Phono Cartridge

    Ortofon


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    In a nutshell then, the new Ortofon 2M Blue and Red moving magnet cartridges offer a thoroughly modern sound that suits today's albums. Both are highly revealing and an engaging listen that is nothing other than very impressive at the price.

    - Hifi World Review


    2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.


    The name 2M was selected among several ideas. We wanted a modern name that would be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.


    Of course the 2M isn't just another pretty face. It has been engineered to the highest standards and is congruent with the unrelenting commitment of Ortofon to provide the most precise and accurate reproduction possible without coloration.


    The 2M series of cartridges feature Ortofon's trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.


    The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.


    2M Blue features a Nude elliptical diamond.

    Ortofon Cartridges
    $236.00
    Cartridge Buy Now
  • Rega Carbon Cartridge Rega Carbon Cartridge Quick View

    $65.00
    Buy Now
    x

    Rega Carbon Cartridge

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music.


    Supplied as standard on the multi award winning RP1 turntable, the Carbon performs far beyond its budget price tag.

    Rega Cartridges
    $65.00
    Rega Carbon Cartridge Buy Now
  • MMF-9.3 Turntable (Without Cartridge) MMF-9.3 Turntable (Without Cartridge) Quick View

    $2,195.00
    Buy Now
    x

    MMF-9.3 Turntable (Without Cartridge)

    Stereophile Stereophile



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Music Hall MMF-9.3 turntable, is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable.


    Music Hall Turntables
    $2,195.00
    MMF-9.3 - No Cartridge Buy Now
  • MMF-7.3 Turntable (Without Cartridge) MMF-7.3 Turntable (Without Cartridge) Quick View

    $1,395.00
    Buy Now
    x

    MMF-7.3 Turntable (Without Cartridge)

    Stereophile


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.


    Music Hall Turntables
    $1,395.00
    MMF-7.3 - No Cartridge Buy Now
  • Rega RP10 Turntable (With Cartridge) Rega RP10 Turntable (With Cartridge) Quick View

    $6,695.00
    Buy Now
    x

    Rega RP10 Turntable (With Cartridge)

    40th



    Rega Made


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Factory Fitted With Apheta 2 Moving Coil Cartridge


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    Rega Turntables
    $6,695.00
    Rega RP10 - Apheta 2 Cartridge Buy Now
  • Rega RP10 Turntable (No Cartridge) Rega RP10 Turntable (No Cartridge) Quick View

    $5,495.00
    Buy Now
    x

    Rega RP10 Turntable (No Cartridge)

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP10 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP10.


    Rega's design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.


    The RP10 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP10 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    RP10 Custom power supply


    Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration and speed adjustments are then made to the power supply to tune the motor for optimal performance.


    The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.


    The RB2000 uses the latest award winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.


    Magnesium and Phenolic - Dual bracing


    A super lightweight plinth combined with a double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This design prevents energy absorption and unwanted resonances which will add un-natural distortions to the music. The RP10 takes our double brace technology to the next level. Not content with an unprecedented stiffness to mass ratio, Rega have obsessively reduced any resonant properties by using two different materials for the new stressed beam. The top layer is magnesium and the bottom layer is pheno-lic (two of the lightest and stiffest materials available). Incorporating two different materials into the brace structure lowers their ability to pick up unwanted airborne vibrations. Simply put, different materials have different natural resonances. By using two different materials together they decrease the natural frequency of each other by self damping.


    Super flywheel effect ceramic platter


    The RP10 uses a custom ceramic flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The new platter features a modified construction over the previous P9 version with improved coupling to the sub platter.


    24V Low noise motor


    The motor is a high specification, 24V twin phase synchronous unit. It is controlled by Rega's unique and innovative RP10-PSU power supply. The motor drives the CNC machined pulley, sub platter and hub-bearing assembly via the twin belt drive. Each motor is individually hand tuned to its own custom power supply in the factory to minimise vibration, motor noise and ensure optimum performance.


    Skeletal plinth design with polyolefin foam core


    Controversially Rega has always researched methods of producing light but stiff and rigid plinths. The technology is simple: unwanted noise at microscopic levels is developed by the turntable motor and main bearing. The plinth can also pick up airborne vibration from the music. From the beginning in the 1970's Rega pioneered the use of a stressed skin structure for the plinth. This uses two layers of phenolic resin with a lightweight particle or fibre board sandwiched between the skins. This technique has been used in many applications where stiff, light structures are needed such as an aircraft wing or a Formula 1 chassis.


    The current increase in interest in turntables has allowed Rega to research and develop higher technology structures for the customer who is happy pay a little more for higher sound quality. The all new RP10 turntable utilises a unique new stressed skin structure produced from thin phenolic skins sandwiching a featherweight nitrogen expanded, closed cell, polyolefin foam core. This material has been developed exclusively for Rega over a three year period. The RP10 plinth is 7 times lighter than the weight of the original Planar 3 plinth. Rega has added even more stiffness in the crucial area between the arm and the main bearing.


    De-coupled outer frame and dust cover


    A common problem for many skeletal design turntables is the inability to incorporate an effective dust cover into the design. We have constructed an outer frame that minimises contact between the inner and outer plinth. The only points of contact are three location devices on the feet which centralises the inner and outer plinths perfectly. This makes set-up extremely easy and allows the use of a dust cover. The RP10 can be used without the outer frame if so desired.


    Turntable design & mythology


    Today there are many approaches to Hi-Fi design which follow established and informed engineering or electronic principles. Amplifier and loudspeaker design has been well documented over the years with excellent technical publications. These subjects have been based on tried and tested acoustic criteria and many computer software programs now exist that enable a near amateur to design a passable working loudspeaker based on known acoustic and mathematical parameters.


    Enter turntable design: When it comes to turntable design we are limited to a few poorly informed articles describing only very limited aspects of design. This is a subject full of mythology. Designers propose theories that counter the basic laws of physics, use terminology that doesn't actually exist in the engineering world, build products that are more like beautiful sculptures than acoustic reproduction machines and sell items costing tens of thousands of pounds that hardly function as intended and often fail to work at all.


    For instance a very common myth is "the heavier the better" concept. Turntable bases weighing tens of kilograms are not uncommon. The reality is that the base actually needs to be as light as possible to prevent unwanted bearing and motor noise being transferred to the turntable or record. Platters also fall under a similar myth with many platter designs becoming so heavy that it is impossible to design a correctly functioning bearing (and some so light that anyone can hear the speed inconsistency). The turntable platter itself needs to be of enough weight to spin at a constant speed within the confines of the chosen bearing and motor drive system.


    Many amateur designers in any field choose one component in a design and try to achieve an extreme in size, weight and quality. They believe that by taking one theory to its extreme the design will become "perfect". The reality of all engineering, design (and life) is that perfection is not possible. Based on this reality, Rega's goal has always been to optimise a mixture of numerous "correct compromises" thus bringing the designer nearer to the unachievable goal of perfection.


    Rega Turntables
    $5,495.00
    Rega RP10 - No Cartridge Buy Now
  • Rega RP8 Turntable - No Cartridge Rega RP8 Turntable - No Cartridge Quick View

    $2,995.00
    Buy Now
    x

    Rega RP8 Turntable - No Cartridge

    40th



    Rega Made


    Need help choosing or installing your phono cartridge? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Rega RP8 skeletal turntable.


    Rega is extremely pleased to announce the launch of the much awaited RP8 turntable. A turntable which takes Rega's design philosophy further than ever before. A radical new plinth using custom designed materials, a new tonearm bearing assembly, 24v low volt-age motor controlled by a hand tuned electronic power supply and a custom version of our Planar 9 engineered hub bearing assembly. These are just some of the features of this amazing new turntable designed to extract more music from your vinyl than ever before.


    The Evolution of Revolution


    Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega's experience and previous achievements allow us to continually develop and produce better products.


    The RP8 represents probably the biggest step forward in the evolution of Roy Gandy's turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.


    The RP8 is the first of our new "skeletal" design turntables offering groundbreaking levels of performance and amazing value for money.


    The RP8 will also be available with its perfect partner, the Apheta moving coil cartridge, factory fitted as a package option.


    Only available in black


    Rega Turntables
    $2,995.00
    Rega RP8 - No Cartridge Buy Now
  • Rega RP8 Turntable - Apheta 2 Cartridge Rega RP8 Turntable - Apheta 2 Cartridge Quick View

    $4,195.00
    Buy Now
    x

    Rega RP8 Turntable - Apheta 2 Cartridge

    40th



    Rega Made


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes with Apheta 2 moving coil cartridge - factory fitted!


    The Rega RP8 turntable takes Rega's design philosophy further than ever before. Meticulously hand-built details and obsessive attention to reducing all sources of distortion are focused in a 24v low voltage motor controlled by a hand-tuned electronic power supply, a radical new high-rigidity plinth using custom designed materials, high flywheel effect platters and a new lower-mass higher-stability tonearm bearing assembly. Add to that a custom version of Rega's Planar 9 engineered hub bearing assembly and this design allows you to extract even more music and sound from your vinyl. Rega's keen eye for practicality also includes incorporating a dust cover into a skeletal design.


    The RP8 is the first of Rega's skeletal design turntables to combine excellent value with groundbreaking levels of performance. Over forty years of experience culminate in the incredible features of the RP8, and in 2013 it was voted one of the best designs of all time by Apple's Sir Jony Ive and Marc Newson, two of the world's most respected designers.


    Only available in Black.


    Rega Turntables
    $4,195.00
    Rega RP8 - Apheta 2 Cartridge Buy Now
  • Rega Planar 6 Turntable with Exact Cartridge (Open Box) Rega Planar 6 Turntable with Exact Cartridge (Open Box) Quick View

    $1,695.00
    Buy Now
    x

    Rega Planar 6 Turntable with Exact Cartridge (Open Box)



    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Demo Discounts
    $1,695.00
    Open Box Turntable Buy Now
  • MMF-1.3 Turntable MMF-1.3 Turntable Quick View

    $299.00
    Buy Now
    x

    MMF-1.3 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Music Hall's new entry-level turntable provides a feature set that is unrivaled at its price. With a built-in phono preamplifier and a quality, pre-mounted cartridge, the mmf-1.3 is everything you need to start listening to vinyl right out of the box!


    The Music Hall mmf-1.3 turntable sets a new benchmark for affordable audiophile turntables. A 3-speed belt driven turntable that comes complete with a tonearm, mounted cartridge, and built-in phono amp. The construction of the mmf-1.3 has been simplified to focus on the critical components; the bearing, the motor, and the tonearm.


    Music Hall Turntables
    $299.00
    MMF-1.3 - With Cartridge & Built-In Phono Amp Buy Now
  • MMF-2.3 Turntable MMF-2.3 Turntable Quick View

    $499.00
    Buy Now
    x

    MMF-2.3 Turntable

    Editors



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Music Hall MMF-2.3 turntable is a 2-speed belt driven audiophile turntable at a budget price. It is constructed using high quality components and it comes complete with a tonearm and cartridge mounted. The construction of the mmf-2.3 has been simplified to focus on the critical components: the bearing, the motor, and the tonearm.


    Music Hall Turntables
    $499.00
    MMF-2.3 - With Cartridge Buy Now
  • MMF-5.3 Turntable MMF-5.3 Turntable Quick View

    $995.00
    Buy Now
    x

    MMF-5.3 Turntable


    Stereophile Stereophile


    Editors Editors


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    "Music Hall MMF-5 Turntable: So good it's laughable! The MMF-5 is a 'plug and play' design you can have up and running in 10 minutes. The MMF-5 will make an analog believer out of the most doctrinaire digital fanatic. It's a gateway drug into the intoxicating world of analog playback. Get hooked you'll never go back!"

    - Michael Fremer, Stereophile, Analog Corner


    The music hall mmf-5.3 turntable is a two speed belt driven audiophile turntable employing the unique dual-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Viso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3 comes complete with Ortophon Blue cartridge mounted and DC motor which provides greater speed stability.


    Music Hall Turntables
    $995.00
    MMF-5.3 - With Cartridge Buy Now
  • MMF-2.3LE Turntable MMF-2.3LE Turntable Quick View

    $549.00
    Buy Now
    x

    MMF-2.3LE Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Music Hall MMF-2.3LE turntable is a 2-speed belt driven audiophile turntable with special ferrari red plinth at a budget price. It is constructed using high quality components and it comes complete with a tonearm and cartridge mounted. The construction of the MMF-2.3LE has been simplified to focus on the critical components: the bearing, the motor, and the tonearm.


    Music Hall Turntables
    $549.00
    MMF-2.3LE - With Cartridge Buy Now
  • MMF-7.3 Turntable MMF-7.3 Turntable Quick View

    $1,595.00
    Buy Now
    x

    MMF-7.3 Turntable

    Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.


    Music Hall Turntables
    $1,595.00
    MMF-7.3 - With Cartridge Buy Now
  • MMF-5.3SE Turntable MMF-5.3SE Turntable Quick View

    $1,395.00
    Buy Now
    x

    MMF-5.3SE Turntable


    Stereophile Stereophile


    Editors Editors


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    "Music Hall MMF-5 Turntable: So Good it's laughable! The MMF-5 is a 'plug and play' design you can have up and running in 10 minutes. The MMF-5 will make an analog believer out of the most doctrinaire digital fanatic. It's a gateway drug into the intoxicating world of analog playback. Get hooked you'll never go back!"
    - Michael Fremer, Stereophile, Analog Corner


    The Music Hall mmf-5.3 special edition turntable is a 2-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform. Sorbothane hemispheres separate the two platforms and provide suspension and vibration damping.


    The mmf-5.3se comes complete with an Ortofon 2M Bronze cartridge.


    Music Hall Turntables
    $1,395.00
    MMF-5.3SE - With Cartridge Buy Now
  • MMF-9.3 Turntable MMF-9.3 Turntable Quick View

    $2,395.00
    Buy Now
    x

    MMF-9.3 Turntable


    Stereophile Stereophile


    Stereophile


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Music Hall MMF-9.3 turntable, is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable.


    Music Hall Turntables
    $2,395.00
    MMF-9.3 - With Cartridge Buy Now
  • MMF-1.5 Turntable MMF-1.5 Turntable Quick View

    $399.00
    Buy Now
    x

    MMF-1.5 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    From the first music note to the final fade-out, the Music Hall mmf-1.5 sets your world to groove and your feet to dance.


    The stunning mmf-1.5 with its superior s-shaped alloy tonearm, Music Hall Melody cartridge, 3-speed belt drive design, and built-in phono pre-amp is a beautifully refined piece.


    Music Hall Turntables
    $399.00
    MMF-1.5 - With Cartridge & Built-In Phono Amp Buy Now
  • VPI Player Turntable VPI Player Turntable Quick View

    $1,500.00
    Buy Now
    x

    VPI Player Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes Pre-Mounted With An Ortofon 2m Red Cartridge, Phonostage And Headphone Amplifier


    The VPI Player is an all in one high-end entry level turntable. It comes complete with a phonostage, and pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It is the perfect solution to enjoying your records! It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for! It is also now available in two finished Hard Rock Maple and Mocha Walnut.


    VPI Turntables
    $1,500.00
    Player Turntable
    Buy Now
  • Clearaudio Concept Turntable COLOR/CARTRIDGE/TONEARM OPTIONS Clearaudio Concept Turntable Quick View

    $1,600.00
    Buy Now
    x

    Clearaudio Concept Turntable


    Have a question about this product? Please email our href=mailto:audioadvisor@soundstagedirect.com>audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Stereophile Product Editors Editors


    The Clearaudio Concept is a winner. For many, it may be the turntable that gets them into this hobby. Others may find it all the turntable they'll ever need.

    - Erick Lichte, Stereophile, July 2012


    My first impressions were of a very smooth-sounding, quiet turntable-tonearm-cartridge assembly. Those ended up being my lasting impressions impressions as well.

    - Michael Fremer, Stereophile, June 2011


    Clearaudio's vision for the concept: design an elegantly styled turntable package featuring a level of groundbreaking technology usually only found in high-end turntables, combining plug-and-play simplicity with outstanding sound quality and affordability.


    Beneath the refined, contemporary exterior lies a level of technical sophistication unique to Clearaudio. The concept's chassis comprises a core of natural medium-density wood fibre within an aluminium surround and upper layer incorporating a high tech synthetic compound. This composite of materials eliminates the detrimental effects caused by unwanted vibrations.


    The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference. The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MC CARTRIDGE. With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.


    The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide - including the German Design Award and 'Best Turntable' award from 'What Hi-Fi? Sound and Vision' magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed MOVING MAGNET (MM) or MOVING COIL (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free 'plug and play': unpack, connect, put the record on the platter - and just enjoy music. There was never more audiophile technology in this class of turntables.


    This item is not eligible for discount.


    Clearaudio Turntables
    $1,600.00
    Concept Turntable - Color/Cartridge/Tonearm Options
    Buy Now
  • VPI Prime Turntable VPI Prime Turntable Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Cartridge Not Included.


    VPI Turntables
    $3,999.00
    VPI Prime Turntable - No Cartridge
    Buy Now
  • VPI Cliffwood Turntable 3 COLORS AVAILABLE VPI Cliffwood Turntable Quick View

    $894.99
    Buy Now
    x

    VPI Cliffwood Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes Pre-Mounted With A VPI/Grado Green Cartridge


    For 40 years, VPI Industries has built turntables in America and kept it in the VPI family. For almost 30 of those years, they have built their turntables in Cliffwood, New Jersey. Upon reaching a more entry level market they are still able to make their products in Cliffwood, New Jersey. Most companies when making entry level products source their components outside their country of origin. This is why VPI celebrates their heritage and their workers by naming this turntable after the place they are built.


    VPI is also excited to be teaming up with their friends from Brooklyn, Grado Labs! VPI engineered a cartridge shell specifically for the Grado to make it easier to mount and contribute to the sound signature. The VPI/Grado Green will be the factory standard mounted cartridge on all VPI Cliffwood turntables.


    The tonearm is a 9 machined aluminum gimbal. Both easy and robust to use while providing top level sonic performance.


    Key Features:


    • VPI/Grado Green Cartridge
    • 9 Gimbaled Tonearm
    • Aluminum Platter
    • 600 RPM Motor


    VPI Turntables
    $894.99
    Cliffwood Turntable - 3 Colors Available
    Buy Now
  • Pro-Ject Signature 10 Turntable 6 OPTIONS AVAILABLE Pro-Ject Signature 10 Turntable Quick View

    $6,000.00
    Buy Now
    x

    Pro-Ject Signature 10 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Audiophile beauty with "state of the art" quality for vinyl lovers!


    Signature 10 is a non-compromise highend turntable/arm configuration with a sophisticated concept combining mass-loaded withfloating turntable principles. Magnetic feet and TPE-pillows decouple the resonance-free metal granulate filled MDF-chassis fromsurface. The subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra-silently on an inverted ceramicball bearing with magnetic suspension and is also TPE damped. The new 10" single-pivot tonearm is a genuine Pro-Ject design.
    With its wide range of adjustment possibilities and the choice of adequate counterweights, nearly all cartridges can be mounted.


    Signature 10 is an audiophile marvel, that represents our championship in precision engineering and our deep love for music!


    Optional SuperPack includes Sumiko Pearwood Celebration II Cartridge at a significantly reduced price.


    Pro-Ject
    $6,000.00
    Signature 10 Turntable - 3 Colors Available - SuperPack Option
    Buy Now
  • VPI Prime Signature Turntable VPI Prime Signature Turntable Quick View

    $5,999.00
    Buy Now
    x

    VPI Prime Signature Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    VPI Turntables
    $5,999.00
    VPI Prime Signature Turntable - No Cartridge
    Buy Now
  • Clearaudio Concept Wood Turntable CARTRIDGE/TONEARM OPTIONS Clearaudio Concept Wood Turntable Quick View

    $2,500.00
    Buy Now
    x

    Clearaudio Concept Wood Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds - 33rpm, 45rpm, and 78rpm - selectable by an Electronic Speed Control knob.


    Clearaudio Turntables
    $2,500.00
    Concept Wood Turntable - Cartridge/Tonearm Options
    Buy Now
Go to top