Pro-ject Authorized & Certified VPI Dealer

VINYL. OUR WAY OF LIFE SINCE 2004

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Turntable Clamp

'
  • 1
Results per page:
  • Clever Clamp Clever Clamp Quick View

    $35.00
    Buy Now
    x

    Clever Clamp

    An ingenious record clamping unit, which is very flat and light, but very tight. Compatible with all turntables.
    Clearaudio Accessories
    $35.00
    Clever Clamp Buy Now
  • KAB Super Record Grip - Push On Record Clamp (On Sale) KAB Super Record Grip - Push On Record Clamp (On Sale) Quick View

    $38.00
    Buy Now
    x

    KAB Super Record Grip - Push On Record Clamp (On Sale)

    The newly redesigned KAB super record grip was designed to replace and improve upon the PIG clamp originally supplied with the Revolver brand turntables. This new design features a 2 piece precision molded frame, spring rubber insert and UHMW polyethylene non marring contact surface. This is especially useful on Rega brand turntables and others where there is very little spindle to grab on to.


    The KAB Super Record Grip reduces resonance and acoustic vibration of the record itself, freeing the stylus to do its intended job of tracing the groove. The result is better focus and detail to the soundstage.


    The Super record grip attaches quickly; by turning with slight pressure, it walks down the spindle and meets the record surface.


    Note: For easier use, the center hole can be lubricated with a diluted solution of 5% Armor All® and alcohol, swabbed with Qtip®.


    The built-in bubble level shows turntable level at a glance to within 1 degree of accuracy.


    Spring reinforced rubber insert holds onto the turntable spindle firmly.


    The built in bubble level allows a quick check of turntable level. A level turntable balances the forces of the needle in the groove.


    When the needle is resting in the record groove, the entire record surface behaves as a microphone picking up vibrations from the air and the turntable below. Damping the record surface reduces the affect of these added vibrations to the needle's already difficult job of reading the groove.


    The really great features to take note of with the KAB super record grip is the ease of use and cost effectiveness.


    The super record grip represents great value. Yet it is quite good at what it does and even has the added benefit of showing level at a glance, each time you use it. Keeping with the KAB philosophy that more is better, but it needn't cost more!


    One issue to be sensitive to is turntables with light floating spring suspensions. You will have to push down some while applying the super record grip. It does not rely on weight. (It only weighs 2 Oz) Be sure your turntable can Bottom Out safely. If this is a concern, consult your turntable maker first.


    [In our opinion, if you can bottom out safely, the super grip is a better solution still over clamps that rely on weight, since they will change the operating height of your platter.]

    KAB Electro-Acoustics
    $38.00
    Record Clamp Buy Now
  • Standard Black Delrin Clamp Standard Black Delrin Clamp Quick View

    $100.00
    Buy Now
    x

    Standard Black Delrin Clamp



    Standard equipment on VPI's Scout series turntables, the Standard Delrin Clamp does an excellent job of reducing the effects of external vibration from interacting with the stylus. This improves focus and pacing, adding weight and power to the sonic presentation.


    Using the Standard Delrin Clamp, can also help reduce (and in some cases eliminate) record warpage and create a much tighter seal between the record and the turntable platter. The clamp essentially locks the record to the platter, reducing vibration typically picked up by the cartridge that colors the sound.


    VPI Accessories
    $100.00
    Delrin Clamp - Standard Black Buy Now
  • Record Puck Record Puck Quick View

    $85.00
    Buy Now
    x

    Record Puck

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Record Puck is a heavy weight record clamp for Pro-Ject Turntables.

    Pro-Ject
    $85.00
    Record Clamp Buy Now
  • Periphery Ring Clamp Periphery Ring Clamp Quick View

    $1,000.00
    Buy Now
    x

    Periphery Ring Clamp


    The Periphery Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge's tracking ability, removing resonance and aiding detail retrieval. A massive ring designed to sit just outside the lead-in groove, the Periphery Ring Clamp's weight flattens the record onto the platter, eliminating edge warps and more completely coupling the record to the platter.


    Scout, Aries 1 & 2, HW-19 & older TNT owners will need to purchase the HRX platter and bearing in order to use the Periphery Ring Clamp. Due to bearing height differences between the VPI models, please give us a call if you'd like to upgrade these components and we'll help you get the right bearing for your turntable.



    VPI Accessories
    $1,000.00
    Periphery Ring Clamp Buy Now
  • VPI Prime Scout Turntable (with 9 Inch 3D Arm) VPI Prime Scout Turntable (with 9 Inch 3D Arm) Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Scout Turntable (with 9 Inch 3D Arm)



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • Upgraded 9 Inch 3D Tonearm
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp


    VPI Turntables
    $2,999.00
    VPI Prime Scout Turntable with 9 3D Tonearm - No Cartridge
    Buy Now
  • Clearaudio Twister Clamp Clearaudio Twister Clamp Quick View

    $150.00
    Buy Now
    x

    Clearaudio Twister Clamp

    LP-clamping unit with resonance absorbing locking unit and stainless steel grip.


    Ergonomically shaped, plate clamp made of high density plastic. Suitable for almost all turntables, ensures full contact of the record to the turntable quickly and easily to handle.

    Clearaudio Accessories
    $150.00
    Twister Clamp Buy Now
  • Clearaudio Quadro Clamp Clearaudio Quadro Clamp Quick View

    $200.00
    Buy Now
    x

    Clearaudio Quadro Clamp

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Quadro Clamp is a heavy bead-blasted stainless steel record weight that increases the surface contact between the record and the platter.


    The Quadro Clamp is a record weight for turntables with pivoted arms. Its appearance and functionality will compliment any high quality turntable.

    Clearaudio Accessories
    $200.00
    Quadro Clamp Buy Now
  • VPI HR-X Turntable VPI HR-X Turntable Quick View

    $15,000.00
    Buy Now
    x

    VPI HR-X Turntable


    Stereophile HRX HRX


    HRX
    HRX


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    THE LEAST EXPENSIVE AND BEST SELLING HIGH END TURNTABLE IN THE WORLD!


    Stereophile Analog Product of the Year runner-up to a $100,000.00 turntable


    JMW 12 3D Tonearm


    The HR-X is known to reviewers and manufacturers around the world for it's natural reproduction of scale and sweep, which are two of the things that make us feel like we are listening to live music. With world class detail, low noise, pace, and timing, the HR-X will bring the concert hall into your home. Best of all, it does this without fiddling, tweaking, or constant resetting. The HR-X is a statement among belt drive turntables! The drive system and the periphery clamp result in wow, flutter, and rumble that are all below measurability providing world class sound.


    VPI Turntables
    $15,000.00
    HR-X - Turntable Buy Now
  • VPI Prime Scout Turntable VPI Prime Scout Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Prime Scout Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Prime Scout features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • JMW 9 tonearm (VPI wire)
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp


    VPI Turntables
    $2,199.00
    Scout 2017
    Buy Now
  • Pro-Ject 2Xperience SB Turntable 6 COLORS AVAILABLE Pro-Ject 2Xperience SB Turntable Quick View

    $1,599.00
    Buy Now
    x

    Pro-Ject 2Xperience SB Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Outstanding performance from a compact and luxurious turntable configuration


    The 2Xperience SB is based on the 2Xperience belt-drive concept which incorporates over 20 years of turntable design experience. The addition of a precision motor controller with electronic speed change, derived from the highly regarded Speed Box yields precise speed accuracy and push button convenience. The superb 9cc Evolution carbon fiber tonearm provides superb performance especially with the factory mounted Sumiko Blue Point No. 2 cartridge, while serving as a solid foundation for future upgrades. The heavy chassis is made from MDF using a non-resonant construction technique.


    The mat is created from a recycled vinyl record bonded to the platter and precision machined to create an ideal turntable/record interface. A custom light-weight record clamp reduces unwanted record vibration and ensures a tight coupling of the record to the platter. The audio performance of the final product benefits from the resonance-free platter, avoiding the ringing effect of common metal and glass platters. Available in a variety of beautiful finishes, the 2Xperience SB looks as good as it sounds and with the highly regarded Blue Point No. 2 included, represents a superb value.




    Pro-Ject
    $1,599.00
    2Xperience SB Turntable - 6 Colors Available
    Buy Now
  • Pro-Ject The Classic Turntable 3 COLORS AVAILABLE Pro-Ject The Classic Turntable Quick View

    $1,099.00
    Buy Now
    x

    Pro-Ject The Classic Turntable




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    SB Upgrade Option: includes a record clamp, leather mat, electronic speed control and a Sumiko Blue Point No.2 cartridge


    The Classic combines the best of modern technical design with a timeless aesthetic that hearkens back to turntables of years past.


    Unlike other throw-back designs that rely solely on clichÉ "retro cool" styling to sell, The Classic is also a technical tour de force. Featuring a new 9" carbon fiber and aluminum composite tonearm, a completely new sub-chassis design, and a set of sophisticated isolation feet, The Classic offers a level performance the distantly-related turntables of analog's golden age could only dream of.


    Don't just take our word for it, though - EISA (the European Imaging and Sound Association) has already bestowed The Classic with their prestigious "Best Turntable Award" for 2017.


    The Classic arrives this month in three beautiful matte wood finishes: walnut, rosenut (walnut with a tasteful red tint), and eucalyptus. Turntable includes a hinged acrylic dustcover and an Ortofon 2M Silver moving magnet cartridge.


    Pro-Ject
    $1,099.00
    Classic Turntable with SB Upgrade Option - 3 Colors Available
    Buy Now
  • VPI Avenger Plus Turntable VPI Avenger Plus Turntable Quick View

    $14,999.99
    Buy Now
    x

    VPI Avenger Plus Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    With the creation and introduction of the Avenger and Avenger reference we found there was a large gap between the products in price range. To accommodate those looking for a step up from the Avenger but not ready to take go all in for the Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger "plus" some solid upgrades that make it a step up from the standard Avenger. Using the technically from our behemoth Titan turntable, we have added the Harry Weisfeld Signature Rim Drive motor assembly. With improved engineering to make it easier to use than ever with an adjustable knob to move the rim drive mechanism which is driven by the included Analog Drive System. Additionally the tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as well as a periphery ring clamp.


    The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. Fully adjustable armboards are made from 5/5" 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!


    VPI Turntables
    $14,999.99
    Avenger Plus Turntable
    Buy Now
  • VPI Avenger Turntable VPI Avenger Turntable Quick View

    $9,999.99
    Buy Now
    x

    VPI Avenger Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 10-3D Tonearm, Prime Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include SDS or Periphery Ring Clamp.


    This product is not eligible for discount.


    VPI Turntables
    $9,999.99
    VPI Avenger
    Buy Now
  • VPI Avenger Reference Turntable VPI Avenger Reference Turntable Quick View

    $20,999.99
    Buy Now
    x

    VPI Avenger Reference Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **See Features Tab For Tonearm Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis with Magnetic Drive Platter, JMW 12-3D-R Tonearm, Rim Drive Motor Assembly, Machined Avenger Feet, HR-X Center Weight, ADS and Periphery Ring Clamp.


    This product is not eligible for discount.


    VPI Turntables
    $20,999.99
    VPI Avenger Reference
    Buy Now
  • Concept Clamp/Weight Concept Clamp/Weight Quick View

    $125.00
    Buy Now
    x

    Concept Clamp/Weight

    The new clearaudio record clamp is distinguished by its ergonomic form, it is precision machined from aluminium, black anodized and finished with a silver rim. On the under side is a Teflon insert that locates over the spindle for frictionless positioning. The record clamp was designed for use with the new clearaudio turntable series (Concept, Innovation Compact, Innovation), however it can also be used with almost any turntable.


    With a weight of 215 gram, a height of 20 mm and a diameter of 75 mm it provides the best possible contact between record and platter as well as easy and ergonomic use.


    This product is not eligible for discount.

    Clearaudio Accessories
    $125.00
    Concept Clamp Buy Now
  • 1
Go to top