Pro-ject Authorized & Certified VPI Dealer

A World of Vinyl

(877) 929-8729
Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
15% Off Vinyl - LP15
Home > Products for: '

Turntable Speed Control

'
Results per page:
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • Pro-Ject Speed Box S 2 COLORS AVAILABLE Pro-Ject Speed Box S Quick View

    $129.00
    Buy Now
    x

    Pro-Ject Speed Box S


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Upgrade to best possible turntable performance with convenient speed changeover through keypress!


    A very useful accessory for many Pro-Ject turntables, that do not offer a built-in electronic speed change. The Speed Box S performs this change by the push of a button between 33 and 45 rpm! The quartz regulation and filter circuit gives a far better speed stability for smooth and undisturbed motor operation. Speed Box S is compatible with a lot of Pro-Ject turntables (see list below).


    • Quartz-generated high precision electronic speed regulation with microprocessor control

    • Sound improvement through motor running smoothness

    • Clean power decoupled from mains interference

    • Allows electronic speed change 33 & 45 rpm

    • 78 rpm possible with optional accessory pulley

    • Suitable for all turntables with 16 volt AC motor, up to 3 watt max. power consumption

    • Metal case shields electronics from vibration and electromagnetic interference

    • Small size allows installation close to record player

    • DC power supply (< 1 watt standby power)

    • Available in silver or black finish


    These turntables with 16 volt AC motor are compatible with Speed Box S:


    33/45 (78 with optional pulley):
    Pro-Ject Debut III, Debut Carbon (only US version with 16 volt motor), 1-Anniversary, Art-1, 1-Xpression III & Classic, RPM-5.1


    33/45 (no 78 available, because pulley can not be exchanged):
    Essential, 2-Xperience Acryl & Classic, 6-perspeX, RPM-1.3, RPM-9.1X, RPM-9.2, RPM-10.1


    Pro-Ject
    $129.00
    Speed Box S
    Buy Now
  • Rega Planar 6 Turntable with Exact Cartridge (Open Box) Rega Planar 6 Turntable with Exact Cartridge (Open Box) Quick View

    $1,695.00
    Buy Now
    x

    Rega Planar 6 Turntable with Exact Cartridge (Open Box)



    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Open Box


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Demo Discounts
    $1,695.00
    Open Box Turntable Buy Now
  • Cruise Control 2.0 Cruise Control 2.0 Quick View

    $299.00
    Buy Now
    x

    Cruise Control 2.0


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    For Music Hall Turntables (not MMF9.1 or 11)


    The music hall cruise control permits the electronic speed control of music hall and project turntables between 33.3 and 45 rpm at the simple touch of a button. Removing the platter and moving the belt from one pulley to the next is no longer required. The quartz-locked speed control provides unmatched speed stability to within ±0.0001% deviation. Used with the appropriate pulley and cartridge, it also permits the replay of 78 rpm records. The replay speed can be increased and decreased in twenty steps of 0.1 rpm. The quartz lock provides perfect speed control for all music hall turntables, many project models, and any turntable with 120v AC synchronous motor. Please consult your dealer for a full list.


    This product is not eligible for discount.


    Music Hall
    $299.00
    Music Hall Cruise Control 2.0 Buy Now
  • MMF-9.3 Turntable MMF-9.3 Turntable Quick View

    $2,395.00
    Buy Now
    x

    MMF-9.3 Turntable


    Stereophile Stereophile


    Stereophile


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The Music Hall MMF-9.3 turntable, is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable.


    Music Hall Turntables
    $2,395.00
    MMF-9.3 - With Cartridge Buy Now
  • MMF-7.3 Turntable MMF-7.3 Turntable Quick View

    $1,595.00
    Buy Now
    x

    MMF-7.3 Turntable

    Stereophile



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.


    Music Hall Turntables
    $1,595.00
    MMF-7.3 - With Cartridge Buy Now
  • Pro-Ject Signature 12 Turntable 6 OPTIONS AVAILABLE Pro-Ject Signature 12 Turntable Quick View

    $12,000.00
    Buy Now
    x

    Pro-Ject Signature 12 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    High-end audiophile turntable with fully adjustable 12 S-shaped tonearm, dampened sub-chassis, continuous speed control, and mass-loaded plinth


    The Signature turntable is Pro-Ject's all-out assault on the analog high-end.


    This no compromise approach to vinyl playback design commemorates Pro-Ject's 20-years as an esteemed manufacturer of turntables and electronics. Each table takes 3 months to build and is entirely constructed and assembled by a team of two highly skilled craftsman - truly an artisan product!


    Signature employs a highly sophisticated approach by combining the themes of mass loading and magnetic decoupling. The main plinth supports two plinths and two motors with a belt-driven flywheel system that is magnetically decouples the platter's bearing. The main plinth also houses the touch screen that allows control of all operational parameters and variable speed adjustment. The second plinth is made of aluminum sits beneath the platter and is responsible for supporting the magnetic suspension. Sorbothane Pillows isolate the entire assembly and further reduce unwanted disturbances and vibration. The flywheel belt-drive system employs two motors and ensures vibration and noise-free mechanical operation for all moving parts.


    The advanced single-pivot 12 tonearm can accommodate virtually any cartridge due to its wide range of adjustment possibilities and selection of different counterweights. It is even possible to adjust the VTA while the record is playing!


    Optional SuperPack includes Sumiko Palo Santos Presentation Cartridge at a significantly reduced price.


    Pro-Ject
    $12,000.00
    Signature 12 Turntable - 3 Colors Available - SuperPack Option
    Buy Now
  • Clearaudio Concept Wood Turntable CARTRIDGE/TONEARM OPTIONS Clearaudio Concept Wood Turntable Quick View

    $2,500.00
    Buy Now
    x

    Clearaudio Concept Wood Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds - 33rpm, 45rpm, and 78rpm - selectable by an Electronic Speed Control knob.


    Clearaudio Turntables
    $2,500.00
    Concept Wood Turntable - Cartridge/Tonearm Options
    Buy Now
  • MMF 11.1 Turntable MMF 11.1 Turntable Quick View

    $4,495.00
    Buy Now
    x

    MMF 11.1 Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    We had the MMF-11 balanced and playing in less than an hour (this includes setting up its fishline-mounted antiskating weight). Even with headphones, it's the most sparkling, accurate turntable we've ever used. And vibrations in our wood-floored testing space never fazed the 39.5-pound unit. This is audiophile bliss.

    - Victor Krummenacher, Wired


    The Music Hall mmf-11.1 turntable, our latest flagship, is a 2-speed belt-driven audiophile turntable, featuring the unique quadruple-plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components, each on their own plinth. The tonearm is mounted to the upper plinth and the inverted ceramic main bearing is mounted to the second plinth allowing the partially sunken 1 1/2 acrylic platter to spin freely.


    Moving the main bearing to the second plinth improved cartridge tracking and significantly lowered background noise. The adjustable magnetic-levitation isolation feet, microprocessor speed control, motors, flywheel, and wiring are all mounted to the bottom plinth. The motors, flywheel, and speed control are further isolated on their own vibration damped dual-plinth platform, which is separately isolated from the upper three main plinths.


    Sorbothane hemispheres separate each of the three main plinths and provide additional vibration damping. The bottom plinth functions as a mass-loaded resonant sink for the entire turntable. Two motors and a flywheel are used to increase torque and speed stability. The mmf-11.1 comes in a high-gloss piano black lacquer finish and ships without cartridge. A large encapsulating acrylic dustcover is included.


    Music Hall
    $4,495.00
    MMF 11.1 Turntable Buy Now
  • VPI Classic Direct Turntable VPI Classic Direct Turntable Quick View

    $30,000.00
    Buy Now
    x

    VPI Classic Direct Turntable

    2013



    In-Home Setup In The Continental U.S. Included!


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic Direct Drive Turntable is the newest turntable in the VPI Classic line. Our design takes advantage of 21st Century motor technology for accurate speed control utilizing a servo motor controller coupled with an active feedback loop to control the motion of the platter. It is a true measure of design and engineering excellence. The Classic Direct Drive Turntable is precision manufactured and painstakingly handmade entirely in the USA. It is simple to set up and is free from any shift in factory settings over time. Some of the VPI Classic Direct Drive Turntable key features are:


    VPI produced a superior design by using fundamentally sound engineering coupled with innovative applications of new technologies. By bringing together a team of engineers and companies with proven track records of engineering achievements we have established a new level of performance in turntables that reach the limits of analog technology. The revolutionary design, the ground breaking direct drive system, the most accurate speed control achieved to date, the outstanding industrial design, the list goes on and on substantiating why the VPI Classic Direct Drive Turntable is the most advanced and technically superior turntable design ever.


    VPI Turntables
    $30,000.00
    Classic Direct Drive Turntable
    Buy Now
  • MMF-9.3 Turntable (Without Cartridge) MMF-9.3 Turntable (Without Cartridge) Quick View

    $2,195.00
    Buy Now
    x

    MMF-9.3 Turntable (Without Cartridge)

    Stereophile Stereophile



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Music Hall MMF-9.3 turntable, is a two speed, belt driven audiophile turntable employing the unique triple plinth construction originated by Music Hall.


    The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable.


    Music Hall Turntables
    $2,195.00
    MMF-9.3 - No Cartridge Buy Now
  • Clearaudio Ovation Turntable COLOR/TONEARM OPTIONS Clearaudio Ovation Turntable Quick View

    $7,250.00
    Buy Now
    x

    Clearaudio Ovation Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The design of the Ovation seems both timeless and minimalist - maximum music enjoyment needs no embellishment.


    Within a precision-machined chassis comprising a sandwich of aluminium and panzerholz bulletproof wood, 100,000 tiny metal balls eliminate any possibility of harmful resonances. Hidden under a 40mm-thick platter made of resonance damping POM is a very quiet decoupled DC motor with high torque.


    With Clearaudio's optical speed control (OSC) and ceramic magnetic bearing (CMB), the Ovation achieves supreme speed stability and redefines the standards in its class. Audio journal 'The Absolute Sound' recognised the Ovation's superior qualities and declared it 'Turntable of the Year'.


    Upgrade available*:

    European Piano Black Lacquer finish available (+$350)


    *contact us to apply upgrade to order


    Clearaudio Turntables
    $7,250.00
    Ovation Turntable - Black or Silver, Tonearm Options
    Buy Now
  • Pro-Ject Essential III Turntable 3 COLORS AVAILABLE Pro-Ject Essential III Turntable Quick View

    $299.00
    Buy Now
    x

    Pro-Ject Essential III Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The starter turntable of choice for audiophiles the world over!


    The new Essential III builds on the successes of the Essential II. The Essential II is a fabulous sounding turntable. It's the least expensive turntable on the market that includes both a high precision main bearing and a solid, adjustable tonearm that's based on the award winning Debut design. It's become the starter turntable of choice for audiophiles the world over.


    The new Essential III adds some nice upgrades compared to the Essential II. Cosmetically, the Essential III takes a cue from the award winning Debut Carbon DC, with a lustrous high-gloss finish that's available in Black, Red, or White. The platter also gets an upgrade: it's constructed of a dense MDF for minimal resonance and finished in a high-gloss piano black. The visual effect is striking, especially on the Red and White tables where the high-gloss platter contrasts nicely with the plinth. It looks really spectacular if you display it with some fun colored vinyl to accentuate the colors! The adjustable 8.6" one-piece aluminum tonearm is significantly more sophisticated than anything close to its price range, and utilizes sapphire bearings for minimal friction and many years of reliable performance. The Essential III also includes a factory mounted/aligned Ortofon OM10 cartridge. You won't find a better performing, better matched cartridge/tonearm combination in this price range.


    The main platter bearing is precision machined high grade stainless steel and the drive pulley is crafted from aluminum. A new DC motor speed controller board regulates the platter speed and the Essential III now includes Connect it E interconnect hardwired directly to the output.


    *Not compatible with Speed Box S or Speed Box DS.


    Pro-Ject
    $299.00
    Essential III Turntable - 3 Colors Available
    Buy Now
  • Pro-Ject 2Xperience SB Turntable 6 COLORS AVAILABLE Pro-Ject 2Xperience SB Turntable Quick View

    $1,599.00
    Buy Now
    x

    Pro-Ject 2Xperience SB Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Outstanding performance from a compact and luxurious turntable configuration


    The 2Xperience SB is based on the 2Xperience belt-drive concept which incorporates over 20 years of turntable design experience. The addition of a precision motor controller with electronic speed change, derived from the highly regarded Speed Box yields precise speed accuracy and push button convenience. The superb 9cc Evolution carbon fiber tonearm provides superb performance especially with the factory mounted Sumiko Blue Point No. 2 cartridge, while serving as a solid foundation for future upgrades. The heavy chassis is made from MDF using a non-resonant construction technique.


    The mat is created from a recycled vinyl record bonded to the platter and precision machined to create an ideal turntable/record interface. A custom light-weight record clamp reduces unwanted record vibration and ensures a tight coupling of the record to the platter. The audio performance of the final product benefits from the resonance-free platter, avoiding the ringing effect of common metal and glass platters. Available in a variety of beautiful finishes, the 2Xperience SB looks as good as it sounds and with the highly regarded Blue Point No. 2 included, represents a superb value.




    Pro-Ject
    $1,599.00
    2Xperience SB Turntable - 6 Colors Available
    Buy Now
  • Audio Technica AT-LP120-USB Turntable Audio Technica AT-LP120-USB Turntable Quick View

    $299.00
    Buy Now
    x

    Audio Technica AT-LP120-USB Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a USB output that connects directly to your computer. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A selectable internal stereo phono pre-amplifier allows the turntable to plug directly to components with no dedicated turntable input. A USB cable and adapter cables are included along with Mac- and PC-compatible Audacity software to digitize your LPs.


    Audio Technica
    $299.00
    Direct Drive USB Turntable Buy Now
  • Audio Technica AT-LP120BK-USB Turntable Audio Technica AT-LP120BK-USB Turntable Quick View

    $299.00
    Buy Now
    x

    Audio Technica AT-LP120BK-USB Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a USB output that connects directly to your computer. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A selectable internal stereo phono pre-amplifier allows the turntable to plug directly to components with no dedicated turntable input. A USB cable and adapter cables are included along with Mac- and PC-compatible Audacity software to digitize your LPs.


    Audio Technica
    $299.00
    Direct Drive USB Turntable Buy Now
  • Clearaudio Innovation Wood Turntable COLOR/TONEARM OPTIONS Clearaudio Innovation Wood Turntable Quick View

    $13,000.00
    Buy Now
    x

    Clearaudio Innovation Wood Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    An Absolute Sound Golden Ear Award winner, the Clearaudio Innovation Wood turntable features a resonance-optimized dual-tier chassis based upon proven Clearaudio three-point design; a combination of Panzerholz (bulletproof wood), aluminum skins, and aluminum pods. Its high-density, dynamically balanced 2.75 POM platter is mated to a half-inch thick, CNC-machined stainless steel sub-platter and Clearaudio's patented CMB (ceramic magnetic bearing) technology, where the platter magnetically levitates on an inverted bearing attached to a low-friction ceramic shaft.


    A high-torque DC motor exclusive to Clearaudio is equipped with an OSC (optical speed control)circuit controlled in real time via an infrared sensor. The end result is a highly musical, detailed presentation with very accurate pitch and exceptional rhythm and pace. The Innovation Wood is also dual-tonearm capable and plays 33 1/3 rpm, 45 rpm and 78 rpm speeds.


    Upgrades available*:

    European Piano Black Lacquer finish (+$1000)

    European Piano Red or White Lacquer finish (+$1750)


    *contact us to apply upgrades to order


    Clearaudio Turntables
    $13,000.00
    Innovation Wood Turntable - Black Or Silver, Tonearm Options
    Buy Now
  • MMF-7.3 Turntable (Without Cartridge) MMF-7.3 Turntable (Without Cartridge) Quick View

    $1,395.00
    Buy Now
    x

    MMF-7.3 Turntable (Without Cartridge)

    Stereophile


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The distinctive design of the mmf-7.3 isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the adjustable tip-toe feet which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.


    Music Hall Turntables
    $1,395.00
    MMF-7.3 - No Cartridge Buy Now
  • Pro-Ject The Classic Turntable 3 COLORS AVAILABLE Pro-Ject The Classic Turntable Quick View

    $1,099.00
    Buy Now
    x

    Pro-Ject The Classic Turntable




    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    SB Upgrade Option: includes a record clamp, leather mat, electronic speed control and a Sumiko Blue Point No.2 cartridge


    The Classic combines the best of modern technical design with a timeless aesthetic that hearkens back to turntables of years past.


    Unlike other throw-back designs that rely solely on clichÉ "retro cool" styling to sell, The Classic is also a technical tour de force. Featuring a new 9" carbon fiber and aluminum composite tonearm, a completely new sub-chassis design, and a set of sophisticated isolation feet, The Classic offers a level performance the distantly-related turntables of analog's golden age could only dream of.


    Don't just take our word for it, though - EISA (the European Imaging and Sound Association) has already bestowed The Classic with their prestigious "Best Turntable Award" for 2017.


    The Classic arrives this month in three beautiful matte wood finishes: walnut, rosenut (walnut with a tasteful red tint), and eucalyptus. Turntable includes a hinged acrylic dustcover and an Ortofon 2M Silver moving magnet cartridge.


    Pro-Ject
    $1,099.00
    Classic Turntable with SB Upgrade Option - 3 Colors Available
    Buy Now
  • Rega Planar 3 Turntable 9 OPTIONS AVAILABLE Rega Planar 3 Turntable Quick View

    $945.00
    Buy Now
    x

    Rega Planar 3 Turntable

    40th
    5


    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took a team of designers headed up by Rega's Roy Gandy, two years to develop the all new 'Planar 3' following the biggest re-design of the iconic 'three' model ever seen.


    The Rega team has worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new 'Planar 3' is truly a new turntable for 2016 carrying over just two components from the previous model.


    New features of the Planar Three:


    RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.


    • Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
      arm clip and an improved spring housing with easier to read numbers.
    • Rega made, new low capacitance phono cable with Neutrik plugs,
    • Improved lower friction, precision horizontal and vertical bearings
    • New design 100g mild steel balance weight.


    Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white


    Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.


    Bearing housing - Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.


    Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.


    Platter - New float glass 'Optiwhite' polished rim 12mm - Improved accuracy in manufacture and stunning looks.


    Re-designed foot - New improved foot to increase stability and reduce vibration transfer.


    24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).


    Motor cover tray with integrated cooling.


    DB Technology (Double Brace Technology)

    Mass absorbs energy - lost energy equals lost music!


    Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic original Planar range.


    The new Planar 3 takes this design philosophy to the next level. A lightweight acrylic laminated plinth strengthened using a new improved double brace system mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) which forms a structurally sound stressed beam assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music.


    Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.


    Hand assembled RB330 tonearm.

    24v low noise motor / 12mm float glass platter.

    Lightweight double braced plinth.

    Precision main bearing.

    Factory fitted Elys2 MM cartridge or mounted with Ortofon 2m Blue cartridge (optional).

    Compatible with the TT-PSU electronic speed change and power supply box (optional).


    Rega Turntables
    $945.00
    Planar Turntable - Black, White, or Red - Cartridge Options
    Buy Now
  • Rega Planar 6 Turntable 3 OPTIONS AVAILABLE Rega Planar 6 Turntable Quick View

    $1,595.00
    Buy Now
    x

    Rega Planar 6 Turntable




    Need help choosing the right turntable for you? Please contact our audio advisor at 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tan-Cast 8 polyurethane foam core plinth (a material developed for the aerospace industry) . This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.


    The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.


    The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.


    Key Features:


    • NEO power supply.
    • Super lightweight foam core plinth.
    • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
    • Available in one finish 'Polaris Grey' matt finish with high gloss black polymer edge trim.
    • Upgrade white drive belt fitted as standard.
    • Custom dual layer smoked / clear float glass platter.
    • Single piece aluminium sub platter.
    • Custom machined high precision drive pulley.
    • Patent pending, ultra-low friction central brass hub.
    • Rega's double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
    • RB330 handmade precision tonearm with custom stainless weight.
    • New high spec Rega 24v low noise synchronous motor - each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
    • New smoked dust cover.
    • New aluminium foot trims and Planar style feet.
    • Available with Ania MC cartridge factory fitted.


    Rega Turntables
    $1,595.00
    Planar 6 Turntable - Cartridge Options
    Buy Now
  • Crosley C100A-SI Turntable (On Sale) Crosley C100A-SI Turntable (On Sale) On Sale Quick View

    $199.99$179.99Save $20.00 (10%)

    Buy Now
    x

    Crosley C100A-SI Turntable (On Sale)


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Take a turn with the new Crosley C100. The adjustable counterweight and smooth s-shaped curves of the aluminum tonearm will get in the groove with ease. Get flashy with the adjustable strobe pitch control, and with a built-in pre-amp, the C100 is ready to rock with any powered speaker system.


    Step up to the next stage of the vinyl experience. High tech features and a sleek metallic body bring this analog player back to the future.


    Amp it Up


    The C100 is loaded with a built in preamp, so out of the box it's ready to blast with powered speakers. Or, plug your own preamp in and flip a switch to have music on your terms. (And tones.) Speakers plug in with RCA output ports, so you can customize your total music experience.


    Built for Sound


    Hi-tech, ABS construction gives the C100 a sleek, solid foundation. A modern transparent lid can be lifted up to control the tunes, or shut to protect records and wandering hands from messing with careful adjustments.


    Belt Up


    Using a belt-driven mechanism lets the C100 turn at two speeds to play 33RPM LPs, and 45RPM singles. There's even a 45 adapter, so you're covered at either speed.


    Get the Point


    The C100 comes equipped with a diamond-tipped Audio Technica needle to pick up every detail of every cut.


    Perfect Pitch


    Adjustable pitch control uses a strobe light beaming onto the platter dots to tame those finicky albums that tweak high or low, giving each note optimum sound.


    No Skate Zone


    This curvy s-shaped tonearm is not going to have any of this skating nonsense, preserving your sound, and your precious records.


    Crosley
    $199.99 $179.99 Save $20.00 (10%)
    C100A-SI Turntable Buy Now
  • Clearaudio Innovation Basic Wood Turntable COLOR/TONEARM OPTIONS Clearaudio Innovation Basic Wood Turntable Quick View

    $7,750.00
    Buy Now
    x

    Clearaudio Innovation Basic Wood Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Sharing design and construction features with our Innovation series, the new Innovation Basic Wood turntable features a 38mm-thick, dynamically-balanced POM platter. The optimally designed tri-star chassis minimizes resonance in the audible range while delivering maximum stability. The Ceramic Magnetic Bearing (CMB) and Optical Speed Control (OSC) combine with Clearaudio's custom high-torque DC motor for excellent speed stability. The Innovation Basic features a second tonearm mount and is available in silver or black aluminum with Natural or Piano Black Lacquer panzerholz wood.


    The Innovation Basic Wood is based on the technology of the Clearaudio Innovation Wood turntable, but uses a single plinth, smaller plinth as opposed to the stainless steel sub-platter found on the Innovation Wood. Its resonance-optimized chassis shape is based on the proven success of Clearaudio's three-point design - a combination of Panzerholz, aluminum layers, and aluminum pods. The Innovation Basic Wood uses Clearaudio's patented CMB (Ceramic Magnetic Bearing) technology, where the platter magnetically levitates on an inverted bearing attached to a low-friction ceramic shaft. The high-torque DC motor is equipped with electronic OSC (Optical Speed Control). The high-density, dynamically balanced 38mm polyoxymethylene (POM) platter provides excellent dimensional stability. The Innovation Basic Wood is dual tonearm capable.


    Upgrades available*:

    European Piano Black Lacquer finish (+$500)

    European Piano White or Red Lacquer Finish (+$875)


    *contact us to apply upgrades to order


    Clearaudio Turntables
    $7,750.00
    Innovation Basic Wood Turntable - Black Or Silver, Tonearm Options
    Buy Now
  • Clearaudio Master Innovation Wood Turntable COLOR/TONEARM OPTIONS Clearaudio Master Innovation Wood Turntable Quick View

    $32,500.00
    Buy Now
    x

    Clearaudio Master Innovation Wood Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    The lowest platter (the lower of two drive platters) is belt-driven by a low-noise, high-torque DC motor controlled by Clearaudio's Optical Speed Control (OSC) technology, which is a microscopic reflective strobe and infrared sensor that ensures incredible speed accuracy.


    The dynamically balanced main platter, a precision-machined sandwich of 70mm of high density polymer and 15mm of stainless steel, is connected to the upper drive platter by Clearaudio's patented Ceramic Magnetic Bearing (CMB), so that the main platter and upper drive platter assembly floats on a magnetic field just above the lower drive platter with no point of load to wear or to generate friction and noise.


    The two drive platters contain a magnetic clutch so that the upper drive platter and the main platter are driven with no physical connection to the drive source.


    In addition to providing silent and frictionless drive, this system gives the Master Innovation Wood twice the flywheel mass of the renowned Clearaudio Innovation Wood turntable.


    The combination of the no-contact magnetic drive, frictionless Ceramic Magnetic Bearing, and Optical Speed Control guarantee incredible pitch stability and freedom from noise, ultimately leading to unbelievably realistic musical reproduction.


    The chassis features four layers of a complex sandwich of resonance-damping materials: aluminum and Panzerholz (bulletproof wood).


    The Master Innovation can accommodate up to three tonearms, allowing for complete flexibility of tonearm and phono cartridge.


    In keeping with Clearaudio's commitment to long-term customer satisfaction, Innovation Wood owners are able to upgrade to the Master Innovation Wood.



    • Magnetic drive system from the Clearaudio Statement turntable with additional 15mm stainless steel sub-platter
    • 70mm thick POM main platter and 15mm stainless steel sub-platter
    • Upper platter uses 85mm Ceramic Magnetic Bearing (CMB)
    • Decoupled 3 speed DC motor with Optical Speed Control (OSC)
    • Pushbutton electronic speed selection
    • 4 Tri-star plinths featuring solid Panzerholz and aluminum sandwich construction
    • 3 tonearm capability
    • Field upgrade path from Innovation Wood
    • Optional piano black lacquer finish over Panzerholz, clear lacquer over Panzerholz standard
    • Drive platters available in black POM or clear acrylic

    Upgrades available*:

    European Piano Black Lacquer finish (+$2000)

    European Piano Red or White Lacquer finish (+$3500)


    *contact us to apply upgrades to order


    Clearaudio Turntables
    $32,500.00
    Master Innovation Wood Turntable - Black Or Silver, Tonearm Options
    Buy Now
Go to top