Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
10% Off Vinyl - 20% Off Vinyl Orders 100+
Home > Products for: '

Vpi Turntable

'
Results per page:
  • VPI Traveler Turntable - Black VPI Traveler Turntable - Black Quick View

    $1,500.00
    Buy Now
    x

    VPI Traveler Turntable - Black


    VPI VPI VPI VPI



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Stereophile Magazine's Analog Component of the Year!


    **All Cartridges Installed Free Of Charge**


    The only entry level high end turntable that is made in America!


    The new entry high end level turntable featuring a new incredibly low friction in the spring loaded sapphire Gimballed bearings! This table was inspired and in memory of Sheila Weisfeld cofounder and owner of VPI Industries for 35 years.



    The Traveler is the culmination of VPI refined engineering and technology providing quality sound and easy usability at a more affordable price.



    I can't imagine a happier way of listening to LPs than with the VPI Traveler. ...The Traveler isn't merely reasonably priced - it's a remarkable bargain, built to last a lifetime. And it's made with love, right here in the US.

    - Stephen Mejias, Stereophile Magazine, November 2012, Vol. 35, No. 11



    Proceeds from the sale of each VPI Traveler sold goes to fight Pancreatic Cancer which tragically took the life of VPI Founder, Sheila Weisfeld.



    VPI Traveler
    $1,500.00
    The Traveler Black
    Buy Now
  • VPI Aries Turntable VPI Aries Turntable Quick View

    $6,000.00
    Buy Now
    x

    VPI Aries Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Aries takes the concepts of the HR-X but brings it down to a foot-print/manageable size for the music lover to work with. Being very diverse and customizable, the Aries can come standard with a 10 JMW arm or with a 12 JMW 3D arm, (known as the Aries 3D). Having an outboard motor, the Aries is smooth and quiet and is complimented very well with the 3D tonearm.


    VPI Turntables
    $6,000.00
    Aries Turntable
    Buy Now
  • VPI Prime Scout Turntable VPI Prime Scout Turntable Quick View

    $2,199.00
    Buy Now
    x

    VPI Prime Scout Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The Prime Scout features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • JMW 9 tonearm (VPI wire)
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,199.00
    Scout 2017
    Buy Now
  • Classic 1 Turntable - Walnut Classic 1 Turntable - Walnut Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Walnut


    Absolute Absolute ToneAudio Golden Golden


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    "The Classic, in my opinion, exceeds the performance of [VPI's] ScoutMaster series and breaks new sonic ground at a breathtakingly low price. I think this is Weisfeld's best sounding design. If ever there were a best buy in 'tables, this is it!" - Harry Pearson, The Absolute Sound, Golden Ear Award Issue, June/July 2009


    Having been featured in countless Audio Magazines, Cigar Aficionado, television series, and even the Discovery Channel; the Classic is a staple product by VPI Industries. The Classic offers true high-end sound while being esthetically pleasing and reasonably priced for all audiences. Its multi layered rigid design and build quality offers a rich yet highly detailed presentation. It is an easily upgradable table giving the user the ability to grow with their listening experience and pocketbook.


    VPI Industries
    $3,299.00
    Classic 1 - Walnut
    Buy Now
  • Classic 1 Turntable - Black Classic 1 Turntable - Black Quick View

    $3,299.00
    Buy Now
    x

    Classic 1 Turntable - Black


    Sterophile Golden Golden


    Absolute Absolute ToneAudio


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic 1 turntable comes standard with the unipivot JMW-10.5i tonearm Special Edition in rigid mount mode, new VPI silver coated pure copper wire, a 2.5 thick plinth trimmed with real black oak or real solid walnut finish (at no additional cost), a solid mounted 600 RPM AC synchronous motor, new 2 thick machined aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X.


    The sound of the Classic 1 turntable is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The Classic 1 turntable gives any turntable made regardless of price a serious run for the money.


    This completely new design has produced the simplest and one of the best sounding VPI tables to date.


    VPI Classic Turntable Features:


    Special Edition JMW-10.5i SE tonearm - By giving up vta on the fly adjustments, you get most of the sound of the highly reviewed JMW-10.5i tonearm. A new less expensive base and mounting saves hundreds of dollars but gives up little in sound.


    New 6061 machined aluminum 18 pound high inertia platter with precision inverted bearing and stainless steel damping plate.


    Speed stability on par with a master tape - Due to the rigid mounting of motor - platter - tonearm there is no random motion to cause speed instabilities.


    Noise rejection allowing the Classic 1 turntable to sit on a wood shelf near four 15 subwoofers and having virtually no feedback.


    Lack of random motion between the motor - platter - tonearm gives the ultimate in low level resolution. Not only does this rigidity improve speed stability, it also allows the retrievel of low level information challenging the world's great turntables and master tapes.


    Absolutely solid, non-resonating laminated one-piece chassis holding all components. This is not a wooden frame; it is a solid laminated 2.5 thick MDF block with 11 gauge steel attached to the top with silicone and long bolts through all the layers. The chassis weighs 30 pounds and is totally non-resonant. Now with solid black oak or solid walnut wood finish on all four sides.


    RCA jack termination so you can use the interconnect of your choice.


    Tonearm anti-skate - For those that require the fine adjustment of anti-skate, it is standard on the JMW-10.5i SE.


    Optional lift off full dustcover is available.


    Optional periphery ring clamp.


    Optional SDS power supply.


    Optional XLR conectors.


    VPI Turntables
    $3,299.00
    Classic 1 - Black
    Buy Now
  • VPI Traveler Turntable - Red VPI Traveler Turntable - Red Quick View

    $1,499.00
    Buy Now
    x

    VPI Traveler Turntable - Red


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Stereophile Magazine's Analog Component of the Year!


    **All Cartridges Installed Free Of Charge**

    The only entry level high end turntable that is made in America!



    The new entry high end level turntable featuring a new incredibly low friction in the spring loaded sapphire Gimballed bearings! This table was inspired and in memory of Sheila Weisfeld cofounder and owner of VPI Industries for 35 years.



    The Traveler is the culmination of VPI refined engineering and technology providing quality sound and easy usability at a more affordable price.



    Proceeds from the sale of each VPI Traveler sold goes to fight Pancreatic Cancer which tragically took the life of VPI Founder, Sheila Weisfeld.



    VPI Traveler
    $1,499.00
    The Traveler Red - No Cartridge
    Buy Now
  • VPI Cliffwood Turntable 3 COLORS AVAILABLE VPI Cliffwood Turntable Quick View

    $894.99
    Buy Now
    x

    VPI Cliffwood Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes Pre-Mounted With A VPI/Grado Green Cartridge


    For 40 years, VPI Industries has built turntables in America and kept it in the VPI family. For almost 30 of those years, they have built their turntables in Cliffwood, New Jersey. Upon reaching a more entry level market they are still able to make their products in Cliffwood, New Jersey. Most companies when making entry level products source their components outside their country of origin. This is why VPI celebrates their heritage and their workers by naming this turntable after the place they are built.


    VPI is also excited to be teaming up with their friends from Brooklyn, Grado Labs! VPI engineered a cartridge shell specifically for the Grado to make it easier to mount and contribute to the sound signature. The VPI/Grado Green will be the factory standard mounted cartridge on all VPI Cliffwood turntables.


    The tonearm is a 9 machined aluminum gimbal. Both easy and robust to use while providing top level sonic performance.


    Key Features:


    • VPI/Grado Green Cartridge
    • 9 Gimbaled Tonearm
    • Aluminum Platter
    • 600 RPM Motor


    VPI Turntables
    $894.99
    Cliffwood Turntable - 3 Colors Available
    Buy Now
  • Periphery Ring Clamp Periphery Ring Clamp Quick View

    $1,000.00
    Buy Now
    x

    Periphery Ring Clamp


    The Periphery Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge's tracking ability, removing resonance and aiding detail retrieval. A massive ring designed to sit just outside the lead-in groove, the Periphery Ring Clamp's weight flattens the record onto the platter, eliminating edge warps and more completely coupling the record to the platter.


    Scout, Aries 1 & 2, HW-19 & older TNT owners will need to purchase the HRX platter and bearing in order to use the Periphery Ring Clamp. Due to bearing height differences between the VPI models, please give us a call if you'd like to upgrade these components and we'll help you get the right bearing for your turntable.



    VPI Accessories
    $1,000.00
    Periphery Ring Clamp Buy Now
  • JMW - Classic Signature Arm JMW - Classic Signature Arm Quick View

    $2,599.99
    Buy Now
    x

    JMW - Classic Signature Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.p>

    VPI Accessories
    $2,599.99
    JMW - Classic Signature Arm Buy Now
  • Integrated VPI Step Up Transformer - CineMag 1131 Integrated VPI Step Up Transformer - CineMag 1131 Quick View

    $1,650.00
    Buy Now
    x

    Integrated VPI Step Up Transformer - CineMag 1131

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    This fully integrated Step-up Transformer/VPI Interface Box was specifically created to improve the performance of your VPI turntable when used with a low output Moving Coil Phono Cartridge. It replaces the standard VPI Interface Box with a unit that combines the top of the line Bob's Devices exclusive "Blue Series" CineMag 1131 Step Up Transformers with the VPI Interface Box. This unit eliminates a set of interconnects and connectors in the phono playback circuit. The path between the moving coil cartridge and the phono preamplifier is as critical as it is sensitive due to the low voltage and current being transmitted. Further, this path is also subject to RF and other interference. You will hear the difference by streamlining this path - "the fewer stones in the road the smoother the ride."


    This Bob's Devices VPI-SUT replaces the standard VPI interface box on the following arms where the interface box is directly attached to the tonearm base/platform : JMW 12.7, JMW 12.6, JMW 12.5, JMW 9T, JMW 9S, JMW C2, JMW C3, Classic, JMW 10, and JMW 10.5i (and other heritage JMW arms - contact us for specific applications). It will not work where the interface box is mounted directly to the plinth.


    You will, "Hear the Magic!"


    This item is not eligible for discount.

    Bob's Devices
    $1,650.00
    Integrated VPI Step Up Transformer - CineMag 1131 Buy Now
  • VPI 3D Tonearm - 10 (With VTA Base) VPI 3D Tonearm - 10 (With VTA Base) Quick View

    $3,000.00
    Buy Now
    x

    VPI 3D Tonearm - 10 (With VTA Base)



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    10 3D Printed Tonearm with stand


    The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.


    This tonearm is backwards compatible and will fit on all past and current VPI Turntables.


    JMW 3D compatibility as of 5/16/13:

    Classic 1

    Classic 2

    Classic 3

    Classic 4 (secondary arm only)


    VPI Accessories
    $3,000.00
    3D Complete Tonearm - 10 (With VTA Base) Buy Now
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • VPI Player Turntable VPI Player Turntable Quick View

    $1,500.00
    Buy Now
    x

    VPI Player Turntable



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Comes Pre-Mounted With An Ortofon 2m Red Cartridge, Phonostage And Headphone Amplifier


    The VPI Player is an all in one high-end entry level turntable. It comes complete with a phonostage, and pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It is the perfect solution to enjoying your records! It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for! It is also now available in two finished Hard Rock Maple and Mocha Walnut.


    VPI Turntables
    $1,500.00
    Player Turntable
    Buy Now
  • VPI Prime Signature Turntable VPI Prime Signature Turntable Quick View

    $5,999.00
    Buy Now
    x

    VPI Prime Signature Turntable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    • Avenger motor
    • Steel corner post
    • Classic signature feet
    • 10 inch reference 3D
    • Steel arm board


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    VPI Turntables
    $5,999.00
    VPI Prime Signature Turntable - No Cartridge
    Buy Now
  • VPI Prime Scout Turntable (with 9 Inch 3D Arm) VPI Prime Scout Turntable (with 9 Inch 3D Arm) Quick View

    $2,999.00
    Buy Now
    x

    VPI Prime Scout Turntable (with 9 Inch 3D Arm)



    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    Features:


    • 300 (US) / 500(OS) RPM motor
    • Rounded black motor housing
    • MDF chassis vinyl wrapped with steel plate (black finish)
    • Upgraded 9 Inch 3D Tonearm
    • Standard VTA base
    • Machined aluminum 11-inch diameter platter, 1 1/3 inch thick
    • Delrin clamp - Scout Clamp

    VPI Turntables
    $2,999.00
    VPI Prime Scout Turntable with 9 3D Tonearm - No Cartridge
    Buy Now
  • VPI Avenger Plus Turntable VPI Avenger Plus Turntable Quick View

    $14,999.99
    Buy Now
    x

    VPI Avenger Plus Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    With the creation and introduction of the Avenger and Avenger reference we found there was a large gap between the products in price range. To accommodate those looking for a step up from the Avenger but not ready to take go all in for the Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger "plus" some solid upgrades that make it a step up from the standard Avenger. Using the technically from our behemoth Titan turntable, we have added the Harry Weisfeld Signature Rim Drive motor assembly. With improved engineering to make it easier to use than ever with an adjustable knob to move the rim drive mechanism which is driven by the included Analog Drive System. Additionally the tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as well as a periphery ring clamp.


    The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly. The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table. Fully adjustable armboards are made from 5/5" 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!


    VPI Turntables
    $14,999.99
    Avenger Plus Turntable
    Buy Now
  • VPI Avenger Reference Turntable VPI Avenger Reference Turntable Quick View

    $20,999.99
    Buy Now
    x

    VPI Avenger Reference Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **See Features Tab For Tonearm Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis with Magnetic Drive Platter, JMW 12-3D-R Tonearm, Rim Drive Motor Assembly, Machined Avenger Feet, HR-X Center Weight, ADS and Periphery Ring Clamp.


    This product is not eligible for discount.


    VPI Turntables
    $20,999.99
    VPI Avenger Reference
    Buy Now
  • VPI Prime Turntable - Walnut VPI Prime Turntable - Walnut Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Turntable - Walnut



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Cartridge Not Included.


    VPI Turntables
    $3,999.00
    VPI Prime Turntable - No Cartridge
    Buy Now
  • VPI Avenger Turntable VPI Avenger Turntable Quick View

    $9,999.99
    Buy Now
    x

    VPI Avenger Turntable


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **Fully Customizable! See Features Tab For Upgrade Options - Please Call Our Audio Advisor To Discuss Upgrades**


    **All Cartridges Installed Free Of Charge**


    The VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.


    Shortly after the development of the Prime, and while cleaning out the warehouse in preparation for a dealer training event, the forgotten Avenger and its designs were re-discovered! The working name was the Tri-Pod Project. Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.


    This beautiful table comes standard with the Avenger Chassis and Classic Platter, JMW 10-3D Tonearm, Prime Motor with 2-Step Pulley, Classic Signature Feet and an HR-X Center Weight. Does not include SDS or Periphery Ring Clamp.


    This product is not eligible for discount.


    VPI Turntables
    $9,999.99
    VPI Avenger
    Buy Now
  • VPI HR-X Turntable VPI HR-X Turntable Quick View

    $15,000.00
    Buy Now
    x

    VPI HR-X Turntable


    Stereophile HRX HRX


    HRX
    HRX


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    THE LEAST EXPENSIVE AND BEST SELLING HIGH END TURNTABLE IN THE WORLD!


    Stereophile Analog Product of the Year runner-up to a $100,000.00 turntable


    JMW 12 3D Tonearm


    The HR-X is known to reviewers and manufacturers around the world for it's natural reproduction of scale and sweep, which are two of the things that make us feel like we are listening to live music. With world class detail, low noise, pace, and timing, the HR-X will bring the concert hall into your home. Best of all, it does this without fiddling, tweaking, or constant resetting. The HR-X is a statement among belt drive turntables! The drive system and the periphery clamp result in wow, flutter, and rumble that are all below measurability providing world class sound.


    VPI Turntables
    $15,000.00
    HR-X - Turntable Buy Now
  • VPI Classic Direct Turntable VPI Classic Direct Turntable Quick View

    $30,000.00
    Buy Now
    x

    VPI Classic Direct Turntable

    2013



    In-Home Setup In The Continental U.S. Included!


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    The VPI Classic Direct Drive Turntable is the newest turntable in the VPI Classic line. Our design takes advantage of 21st Century motor technology for accurate speed control utilizing a servo motor controller coupled with an active feedback loop to control the motion of the platter. It is a true measure of design and engineering excellence. The Classic Direct Drive Turntable is precision manufactured and painstakingly handmade entirely in the USA. It is simple to set up and is free from any shift in factory settings over time. Some of the VPI Classic Direct Drive Turntable key features are:


    VPI produced a superior design by using fundamentally sound engineering coupled with innovative applications of new technologies. By bringing together a team of engineers and companies with proven track records of engineering achievements we have established a new level of performance in turntables that reach the limits of analog technology. The revolutionary design, the ground breaking direct drive system, the most accurate speed control achieved to date, the outstanding industrial design, the list goes on and on substantiating why the VPI Classic Direct Drive Turntable is the most advanced and technically superior turntable design ever.


    VPI Turntables
    $30,000.00
    Classic Direct Drive Turntable
    Buy Now
  • Prime Series Acrylic Turntable Tabletop Dust Cover Prime Series Acrylic Turntable Tabletop Dust Cover Quick View

    $349.00
    Buy Now
    x

    Prime Series Acrylic Turntable Tabletop Dust Cover

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    The Only Dust Cover Authorized By VPI Industries


    In order to protect your investment in a VPI turntable, AudioShield created a product line that supports production VPI turntables.


    This product supports the VPI Prime and VPI Prime Signature turntables.


    This product is 100% made in the United States of America.


    AudioShield warrants this unit against defects in materials and/or workmanship for 90 days from the date of purchase.


    Product Dimensions:

    Width: 24

    Depth: 17.25

    Height: 10.25


    Turntable not included in purchase.

    AudioShield
    $349.00
    VPI Dust Cover - Tabletop Buy Now
  • VPI Turntable Mat VPI Turntable Mat Quick View

    $15.00
    Buy Now
    x

    VPI Turntable Mat

    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI turntable mat

    VPI Accessories
    $15.00
    Turntable Mat Buy Now
  • VPI Prime Turntable VPI Prime Turntable Quick View

    $3,999.00
    Buy Now
    x

    VPI Prime Turntable



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    Thinking about upgrading your VPI Turntable? Call our audio advisors to discuss trade-in value.


    All Cartridges Installed Free of Charge


    By getting out of the way entirely, the VPI Prime simply let the cartridge do its intended job. Most other turntables make this music 'fall' out of the speakers, but with the VPI it just sang! - Alan Sircom, HiFi +


    The past 3 years VPI has been focusing mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime we wanted to get back to our roots and focus on the existing audience with a table that offers quality hi-end sound while taking advantage of our improvements in technology. Also, it was important to show the industry that we will still be making new turntable and designs whether Harry is in the factory or poolside! The Prime is Mat Weisfeld's first solo design on a table with Harry's approval as well as input from the rest of the VPI staff. The shape of the Prime is meant to have a curvier and sexy look compared to the classic look of our tables over the past 10 years. At same time having the footprint to accommodate the space needed for a 10 inch 3D arm.


    Cartridge Not Included.


    VPI Turntables
    $3,999.00
    VPI Prime Turntable - No Cartridge
    Buy Now
Go to top