Authorized & Certified VPI Dealer

A World of Vinyl

Site Search
Menu Free shipping on domestic orders over $49.99! - We ship worldwide!
20% Off Vinyl - LP20
Home > Products for: '

Vpii e3008 33

'
Results per page:
There were no results that contained all of the words in your query. These results contain some of the words.
  • 33 RPM Tube And Tube Holder 33 RPM Tube And Tube Holder Quick View

    $80.00
    Buy Now
    x

    33 RPM Tube And Tube Holder

    VPI


    For 12'' Records


    Replacement 33rpm vacuum pick-up tube and holder for the VPI 16.5 record cleaning machine.

    VPI Accessories
    $80.00
    33 RPM Tube And Tube Holder - For 12 Records Buy Now
  • AudioQuest Rocket 33 Speaker Cable MULTIPLE LENGTHS AVAILABLE AudioQuest Rocket 33 Speaker Cable Quick View

    $249.95
    Buy Now
    x

    AudioQuest Rocket 33 Speaker Cable


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.



    Full Range Termination with Banana (Silver) Plug*


    Custom Lengths Available Upon Request


    This Double Star-Quad Geometry "Rocket" cable does not look normal on the outside, and it is not at all normal on the inside. A sophisticated combination of extraordinary materials and extremely refined design allows the Rockets to honor all types of music equally.


    SOLID LONG-GRAIN COPPER/PERFECT-SURFACE COPPER (LGC/PSC) CONDUCTORS: Rocket 33 uses a carefully finessed combination of Long-Grain Copper and extremely high-purity Perfect-Surface Copper. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity.


    CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION): The four negative conductors in Rocket 33 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Rocket 33 uses Nitrogen-Injected Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss with a benign distortion profile. Thanks to all the air in Foamed-Polyethylene Insulation, it causes much less of the "out-of-focus" effect common to other materials.


    DOUBLE STAR-QUAD GEOMETRY: The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 33 allows for significantly improved dynamic contrast and intelligibility compared to parallel conductors.


    SPREAD-SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any conductor of a particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different sized conductors. The different SST-determined conductor sizes used in Rocket 33 allow an exceptionally clear, clean and dynamic sound.


    *Different Terminations & Multi-Spade Plug Options Available Upon Request


    AudioQuest
    $249.95
    Prepared Speaker Cable (Pair) - Multiple Lengths Available
    Buy Now
  • Vacuum Tube (Velvet) Vacuum Tube (Velvet) Quick View

    $29.99
    Buy Now
    x

    Vacuum Tube (Velvet)

    VPI


    For VPI Record Cleaning Machines 16.5, 17 and 27.

    VPI Accessories
    $29.99
    Vacuum Tube - Velvet Buy Now
  • Analog Drive System (ADS) Analog Drive System (ADS) Quick View

    $1,000.00
    Buy Now
    x

    Analog Drive System (ADS)



    The ADS design includes two pure analog frequency generators featuring low distortion and noise; a high current Class-A/B amplifier that is transformer-coupled to the turntable output; analog control logic for low noise operation; 33/45 RPM analog speed adjustment controls with center detent positions that are factory calibrated for 60/81Hz; analog logic controlled run/stop switching with the output RMS voltage @ 120VAC on startup, followed by a step down to 90VAC after an 8-second delay for quick starting of heavy platters.


    Operational features

    The ADS includes a lighted power on/off switch allowing it to remain powered up during listening sessions for the oscillators to remain warmed up for lowest distortion. There is a separate run/stop switch to control the motor operation. The ADS also utilizes separate 60 Hz and 81 Hz oscillators to eliminate unnecessary switching circuitry in the oscillator circuits for long term speed stability and low oscillator distortion. Turntable speed is chosen using a switch located between the 33 RPM and 45 RPM speed adjustment controls; LEDs indicate the Run/Stop condition and chosen speed. Speed adjustment controls provide a center detent position that is factory calibrated to 60 and 81Hz +/- .02 Hz in their center detented position. The controls also provide fine speed adjustment of approximately 3 Hz through continuously variable linear adjustment controls. The circuitry provides a startup voltage of approximately 120VAC for 8 seconds on startup to assist quick speed ramp of heavier platters, then reduces to 92VAC for its steady state run voltage.


    Speed Control and adjustment

    The front panel contains a two-position push-button switch for selecting either 33 RPM or 45 RPM operation. Pressing the switch either latches it in or releases the switch to its outward position for 33 RPM operation. There are separate speed adjustment controls for 33 and 45 RPM. The controls have a detented center position that is factory calibrated for 60 Hz (33 RPM) and 81 Hz (45 RPM). The speed is also continuously adjustable +/- 3 Hz for fine tuning of the platter speed using a stroboscopic disk and 60 HZ light source. Blue LED indicators adjacent to the controls indicate which speed is set at a glance.


    Motor Stop and Run

    The ADS is meant to be left powered on during the listening session. The platter is started and stopped by the front panel Run/Stop momentary push-button switch. There is an LED indicator the glows red when stopped and green when the platter is turning.


    System power

    There is an IEC power module on the rear panel to supply AC power to the ADS. The IEC module contains a fuse drawer that holds a 1-amp slow blow fuse protecting the ADS from electrical system malfunctions.


    AC power to the ADS is controlled by the power switch located on the left-hand side of the front panel. When the ADS is powered up, the indicator in the switch glows blue indicating the internal power supplies are functioning properly.


    Output to Turntable

    The 125 VAC max output to the motor is supplied by the identified AC receptacle on the rear panel. The receptacle output provides a maximum 20 watts. Higher wattage loads will seriously damage the ADS.


    VPI Accessories
    $1,000.00
    Analog Drive System Buy Now
  • Black Delrin Vacuum Tube Black Delrin Vacuum Tube Quick View

    $70.00
    Buy Now
    x

    Black Delrin Vacuum Tube


    Newest version vacuum tube made from highly durable Delrin plastic and includes a guide slot to precisely align with the vacuum tube tube holder. The Advantage of a Delrin tube is High Stiffness, Low Friction and Excellent Dimensional Stability! 



    Replacement 33 1/3 (12") Black Delrin Vacuum Pickup Tube for the VPI 16.5, 17 & 27 Typhoon record cleaning machines. We recommend buying two so you always have a spare! 



    Advantages of Delrin: 

    • High Stiffness

    • Low Friction

    • Excellent Dimensional Stability



    Tube Dimensions: 

    5 3/16" Length

    5/8" Diameter  



    VPI Accessories
    $70.00
    Black Delrin Vacuum Tube Buy Now
  • Strobe Disc Strobe Disc Quick View

    $29.99
    Buy Now
    x

    Strobe Disc



    Turntable speed evaluation disc. A must have for all vinyl lovers!!


    Features:

    -Accurately checks Turntable speed.

    -Three Speeds: 33-1/3; 45 & 78 RPM.

    -Plus or minus 2% on the 33-1/3.

    -Large easy-to-read Strobe lines.



    VPI Accessories
    $29.99
    Turntable Speed Evaluation Disc Buy Now
  • Melancholy Melancholy Quick View

    $15.99
    Buy Now
    x

    Melancholy

    12 of an original 78 RPM recording, released at 33 1/3.
    1. Melancholy (Blues)
    2. Solitude (Blues)
    Meade Lux Lewis
    $15.99
    Vinyl LP - Sealed Buy Now
  • VPI HR-X Turntable VPI HR-X Turntable Quick View

    $15,000.00
    Buy Now
    x

    VPI HR-X Turntable


    Stereophile HRX HRX


    HRX
    HRX


    Need help choosing the right turntable for you? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    **All Cartridges Installed Free Of Charge**


    THE LEAST EXPENSIVE AND BEST SELLING HIGH END TURNTABLE IN THE WORLD!


    Stereophile Analog Product of the Year runner-up to a $100,000.00 turntable


    JMW 12 3D Tonearm


    The HR-X is known to reviewers and manufacturers around the world for it's natural reproduction of scale and sweep, which are two of the things that make us feel like we are listening to live music. With world class detail, low noise, pace, and timing, the HR-X will bring the concert hall into your home. Best of all, it does this without fiddling, tweaking, or constant resetting. The HR-X is a statement among belt drive turntables! The drive system and the periphery clamp result in wow, flutter, and rumble that are all below measurability providing world class sound.


    VPI Turntables
    $15,000.00
    HR-X - Turntable Buy Now
  • Standard Belt Standard Belt Quick View

    $30.00
    Buy Now
    x

    Standard Belt

    VPI


    This belt is an OEM Replacement for the following models of VPI turntables:


    • Prime, all models

    • Scout, all models

    • Scoutmaster, all models*

    • Aries, all models*

    • HW-19, all models

    • Classic, all models

    • TNT JR


    *Models with flywheels or dual motor drive require a different belt kit.

    VPI Accessories
    $30.00
    Standard Belt Buy Now
  • SSM Cover SSM Cover Quick View

    $399.99
    Buy Now
    x

    SSM Cover

    VPI


    Specify tonearm in the comment section of your order.

    VPI Accessories
    $399.99
    SSM Cover Buy Now
  • VPI MW-1 Cyclone Record Cleaning Machine VPI MW-1 Cyclone Record Cleaning Machine Quick View

    $1,199.99
    Buy Now
    x

    VPI MW-1 Cyclone Record Cleaning Machine



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    New Cleaning Machine From VPI!


    Features:

    -Aluminum housing

    -Ability to turn the motor in both directions while the vacuum is on

    -The motor turns on the outside of the platter rather than the center so you can press as hard as you like with your brush without worrying about bending/breaking the center motor shaft


    VPI Record Cleaners
    $1,199.99
    MW-1 Cyclone Cleaning Machine Buy Now
  • VPI JMW-9 Tonearm VPI JMW-9 Tonearm Quick View

    $1,000.00
    Buy Now
    x

    VPI JMW-9 Tonearm


    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    JMW-9 (223-MM) tonearm


    VPI Accessories
    $1,000.00
    JMW-9 Tonearm Buy Now
  • VPI 299D Integrated Amplifier VPI 299D Integrated Amplifier Quick View

    $3,999.99
    Buy Now
    x

    VPI 299D Integrated Amplifier



    Have a question about this product? Please email our audio advisor or call 1-877-929-8729 with any questions or concerns regarding your equipment purchase.


    VPI Collectible - Limited To 100


    Includes 90 Day Warranty For Tubes And 3 Year Warranty For Amplifier


    This amp is so good, I bought one myself! -Seth Frank, Owner of SoundStageDirect©


    Original created Harry Weisfeld long time family friend Steve Leung (VAS) collaborated together to bring back one of their favorites, the Scott 299D integrated amp. The integrated has a phono stage, amplifier, and headphone amp built right in. The Limited Edition has been restricted to 100 so grab this VPI collectible while you can.


    VPI Amplifier
    $3,999.99
    VPI 299D Integrated Amplifier Buy Now
  • Periphery Ring Clamp Periphery Ring Clamp Quick View

    $1,000.00
    Buy Now
    x

    Periphery Ring Clamp


    The Periphery Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge's tracking ability, removing resonance and aiding detail retrieval. A massive ring designed to sit just outside the lead-in groove, the Periphery Ring Clamp's weight flattens the record onto the platter, eliminating edge warps and more completely coupling the record to the platter.


    Scout, Aries 1 & 2, HW-19 & older TNT owners will need to purchase the HRX platter and bearing in order to use the Periphery Ring Clamp. Due to bearing height differences between the VPI models, please give us a call if you'd like to upgrade these components and we'll help you get the right bearing for your turntable.



    VPI Accessories
    $1,000.00
    Periphery Ring Clamp Buy Now
  • HR-X Stainless Steel Center Weight HR-X Stainless Steel Center Weight Quick View

    $150.00
    Buy Now
    x

    HR-X Stainless Steel Center Weight



    This hefty stainless steel weight is the perfect way to improve your favorite record's sound by dampening your LP for increased resolution. It's unthreaded design lets you use it with any turntable!



    VPI Accessories
    $150.00
    HR-X Center Weight - Stainless Steel Buy Now
  • Anti-Skate Device - JMW-12 Anti-Skate Device - JMW-12 Quick View

    $100.00
    Buy Now
    x

    Anti-Skate Device - JMW-12



    For use with JMW-12


    You will see three rubber rings on the straight shaft; these are used to set the anti-skating force.


    The two rubber rings on the shaft with the grooves are used to set the height of the monofilament. Set the rubber ring on the lowest groove if it is not there already and slip the loop of monofilament over the grooved shaft. Push the second ring down to lock the loop in place on between the first and second groove. Try to keep the monofilament as level as possible but don't go crazy, it is not audible and causes no problem if it is slightly off level.


    You can adjust the settings of the mechanism using the 1/16" Allen wrench provided. Adjust it so the arm can travel to the inner grooves of the record without the mechanism pulling it or causing it to skip grooves.


    Minimal anti-skate force is needed do just enough to keep the image stabilized and the cantilever centered in the groove.




    VPI Accessories
    $100.00
    Anti-Skate Device - JMW-12 Buy Now
  • Single Motor Flywheel Single Motor Flywheel Quick View

    $1,500.00
    Buy Now
    x

    Single Motor Flywheel



    The HR-X motor/flywheel combination is now available for the Aries, Aries 2, and all TNT turntables. A machined housing, 300 rpm motor, 10 pound flywheel spinning at 500 rpm is included.


    VPI Accessories
    $1,500.00
    Single Motor Flywheel Buy Now
  • Cork Mat Cork Mat Quick View

    $16.00
    Buy Now
    x

    Cork Mat



    Replacement cork mat for VPI HW-16.5, HW-17 & HW-27 Typhoon record cleaners.

    VPI Accessories
    $16.00
    Cork Mat Buy Now
  • 600 RPM Replacement Motor 600 RPM Replacement Motor Quick View

    $250.00
    Buy Now
    x

    600 RPM Replacement Motor


    VPI Accessories
    $250.00
    600 RPM Replacement Motor Buy Now
  • Crosscheck Level Crosscheck Level Quick View

    $10.00
    Buy Now
    x

    Crosscheck Level

    VPI


    Leveling a turntable is essential to ensure proper performance. The platter's constant speed, cartridge's tracking ability and the tonearm's smooth motion can all be affected if the turntable isn't level.


    VPI's Crosscheck Turntable Level is an effective, easy to use level, perfect for turntables. The Crosscheck Level allows two axis to be checked simultaneously, making leveling a quick and simple task. The Crosscheck Level's small form factor allows quick measurements to be taken anywhere; on the platter, on the plinth, even on the shelf itself.

    VPI Accessories
    $10.00
    Crosscheck Level Buy Now
  • Magic Lube (1 oz.) Magic Lube (1 oz.) Quick View

    $30.00
    Buy Now
    x

    Magic Lube (1 oz.)

    VPI
    VPI Accessories
    $30.00
    Magic Lube - 1 oz. Buy Now
  • Deluxe Delrin/Stainless Clamp Deluxe Delrin/Stainless Clamp Quick View

    $150.00
    Buy Now
    x

    Deluxe Delrin/Stainless Clamp

    VPI Accessories
    $150.00
    Deluxe Delrin Clamp - Stainless Steel Buy Now
  • Classic Aluminum Platter And Bearing Classic Aluminum Platter And Bearing Quick View

    $1,000.00
    Buy Now
    x

    Classic Aluminum Platter And Bearing



    Open Box


    Give Your VPI a Facelift and a Performance Boost!  


    VPI owners can now upgrade their older platters to the awesome 2-inch thick Aluminum Platter used on the Classic. turntable and fits just about every model (except the HR-X).


    Adding the new aluminum/stainless steel platter makes a huge improvement, eliminating noise and improving speed stability.  No ringing, no resonance, just a cool new look and great performance.


    Please let us know which VPI turntable you have to determine if this platter is a fit. 


    NOTE: Some assembly required. 



    VPI Accessories
    $1,000.00
    Classic Platter - Aluminum Buy Now
  • JMW - Classic 1 Arm JMW - Classic 1 Arm Quick View

    $1,599.99
    Buy Now
    x

    JMW - Classic 1 Arm


    For our 30th anniversary VPI had to come up with something really special at just the right price for a world in a recession. The Classic was the answer and the Classic tonearm was the logical choice for it.



    Born from the 10.5i, stretched to fit the Classic chassis, simplified to save on cost, boiled down to the important basics that make for good engineering and good sound.


    The Classic tonearm is so good Hi Fi Plus gave it as part of the Classic package Turntable of the Year!!


    The Classic arm is a full 10.5 long for very low tracking error, solidly mounted to the Classic base, VTA adjustable with a ship captains wheel adjuster, RCA or optional XLR jacks, ultra stable design.


    The Classic arm is fast, clean, stable, very low in distortion, and dynamic like a master tape. When combined with a cartridge of 7-11 grams and a compliance of 11-16 such as the VPI/Dynavector 20X you will be startled by the dynamic range a low level resolution this arm can reproduce.


    Not eligible for discount.

    Portion of proceeds benefit Jonathan Weisfeld Memorial Fund.



    VPI Accessories
    $1,599.99
    JMW - Classic 1 Arm Buy Now
There were no results that contained all of the words in your query. These results contain some of the words.
Go to top